xp系统mtp驱动程序_在XP中回滚设备驱动程序

xp系统mtp驱动程序

Sometimes in Windows XP when you update a device driver, the new driver version doesn’t necessarily get along with the XP configuration.  If you update your system’s hardware and suddenly things don’t seem to work correctly, one troubleshooting step is to rollback the current driver to the previous one.  In my IT career I have noticed this the most with Video and Print drivers.  Of course any hardware can fail due to an incorrect software driver.

有时在Windows XP中，当您更新设备驱动程序时，新的驱动程序版本并不一定与XP配置兼容。 如果您更新系统的硬件，但突然事情似乎无法正常运行，则故障排除步骤之一是将当前驱动程序回滚到前一个驱动程序。 在我的IT职业生涯中，我最注意到视频和打印驱动程序。 当然，由于错误的软件驱动程序，任何硬件都可能发生故障。

Right click My computer Properties hardware and go into Device Manager.  Or a much easier way to access Device manager is to enter “devmgmt.msc” into the run line then click OK.

右键单击“我的电脑”，然后单击“属性”硬件，然后进入“设备管理器”。 或者访问设备管理器更简单的方法是在运行行中输入“ devmgmt.msc” ，然后单击“确定”。

In device manager just navigate to the device which is not behaving correctly.  For this example I will use the Integrated Sound Device.  Right click the device and select Properties.

在设备管理器中，只需导航至行为不正确的设备即可。 对于此示例，我将使用集成声音设备。 右键单击设备，然后选择属性。

Now click the Driver tab then the Roll Back Driver button.  Agree to the warning box to continue rolling back the driver to its previous state.

现在，单击“驱动程序”选项卡，然后单击“回滚驱动程序”按钮。 同意警告框，以继续将驱动程序回滚到以前的状态。

This is a much easier step than doing a complete System Restore.

这比进行完整的系统还原要容易得多。

翻译自: https://www.howtogeek.com/79966/roll-back-device-driver-in-xp/

xp系统mtp驱动程序