如何在Virtual PC中更改虚拟机引导设备

If you’re trying to install an OS or are testing out boot disks, you might be wondering how to change the boot device. Here’s the quick and easy technique to change it.

如果您试图安装操作系统或正在测试启动盘，则可能想知道如何更改启动设备。 这是更改它的快捷方法。

What we’re going to do is go into the virtual machine’s BIOS and tweak it there.

我们要做的是进入虚拟机的BIOS并对其进行调整。

调整启动设备 (Tweaking the Boot Device)

First, click on the Ctl+Alt+Del button in your virtual machine so it can reboot.

首先，单击虚拟机中的Ctl + Alt + Del按钮，使其可以重新启动。

When the POS comes up (as shown in the image below), you should press the Esc key until you bet into the BIOS menu.

出现POS时(如下图所示)，应按Esc键，直到下注到BIOS菜单。

Once in the BIOS menu, navigate using your left and right arrow keys until you get to the Boot menu.

进入BIOS菜单后，使用向左和向右箭头键导航，直到进入“引导”菜单。

Press Enter on Boot Device Priority and you will see a menu to select your primary booting device.

在启动设备优先级上按Enter键，您将看到一个菜单来选择您的主启动设备。

Use your + and – keys to select your primary boot device. Assuming you will use a CD, DVD or ISO file, you should select your CDROM device as 1st Boot Device.

使用+和–键选择主引导设备。 假设您将使用CD，DVD或ISO文件，则应选择CDROM设备作为第一启动设备。

Then press F10 to save and exit and you will see a screen like this:

然后按F10键保存并退出，您将看到如下屏幕：

After you confirm your changes, your virtual machine will boot and you will be able to begin your installation.

确认更改后，虚拟机将启动，您将能够开始安装。

翻译自: https://www.howtogeek.com/59084/how-to-change-the-virtual-machine-boot-device-in-virtual-pc/