自制显示器支架_如何选择合适的显示器支架

自制显示器支架

I have some depressing news for you: the mount or stand that came with your monitor probably sucks. Oh, it’ll hold up the screen and stand on your desk…but that’s about it.

我为您带来一些令人沮丧的消息：显示器随附的支架或支架可能很烂。 哦，它会抬起屏幕并站在您的书桌上……但仅此而已。

Most stock monitor stands that come from manufacturers are barebones, lacking options for both viewing and ergonomics (with a few exceptions for premium and gaming-branded models). Replacing it with a dedicated stand, especially if you use a multiple monitor setup, is an easy way to improve your workspace. Here’s how to pick the right one.

来自制造商的大多数库存监控器支架都是准系统，缺乏查看和人体工程学的选择(高级和游戏品牌型号除外)。 用专用支架代替它，尤其是如果您使用多显示器设置时，是改善工作空间的简便方法。 这是选择正确的方法。

确保您的显示器兼容VESA (Make Sure Your Monitors Are VESA Compatible)

Before we continue: know that in order to use basically any third-party stand or mount, your monitor needs to be VESA compatible. That means having standard mounting holes drilled into the back, typically directly into the steel frame of the monitor itself, allowing for any compatible mount to be screwed in. VESA 100 (with a square hole pattern 100mm wide on each side) is the standard, though some super-sized monitors above 35 inches may have larger requirements. Many smaller, cheaper, or thinner monitors may not be VESA-compatible, and will work only with the custom stands that came from the manufacturer.

在继续之前，请注意：要基本使用任何第三方支架或安装架，您的显示器都必须与VESA兼容。 这意味着要在背面钻出标准安装Kong，通常直接在显示器本身的钢制框架中钻入，从而允许将任何兼容的支架拧入。VESA 100(每侧宽100mm的方Kong图案)是标准配置，尽管某些35英寸以上的超大型显示器可能有更大的要求。 许多更小，更便宜或更薄的显示器可能不兼容VESA，并且只能与制造商提供的定制支架一起使用。

The monitor on the left includes a 100mm VESA mount, but the one on the right has a curved back that can’t accommodate one.

左侧的显示器包括100毫米VESA支架，但是右侧的显示器具有弯曲的后背，无法容纳一个。

独立式支架：符合人体工程学的廉价方案 (Freestanding Mounts: Ergonomics On a Budget)

These are simply a replacement for the standard monitor mound or stand—they attach to your monitor at the top and rest on your desk’s surface, just like normal. But replacing your stand with a third-party one can give you more options, including a much greater height (ideally placing the center of the screen at your eye level or just below it), panning and tilting, and even rotating the screen itself into a landscape format.

这些只是标准显示器堆或支架的替代品，它们像通常一样，固定在顶部的显示器上并搁置在桌面上。 但是，用第三方支架代替支架可以给您更多选择，包括更大的高度(理想情况下，将屏幕的中心置于您的视线高度或在其视线以下)，平移和倾斜，甚至将屏幕本身旋转成横向格式。

More elaborate models come with spring-loaded rising mechanisms and integrated cable management, but if you’re looking for a freestanding mount, you are generally want the cheapest option. Single-monitor stands with all the features above can be had for as little as $30.

更加精致的型号带有弹簧加载的上升机构和集成的电缆管理 ，但是，如果您要寻找独立式安装架，通常会需要最便宜的选择。 具有上述所有功能的单显示器支架的价格低至30美元 。

侧夹式桌面安装架：最大的桌面空间和灵活性 (Side-Clamp Desk Mounts: Maximum Desk Space and Flexibility)

An intermediate option is to use a clamp-style mount, which attaches the riser pole or arm to the side of the desk. This gives you the advantage of clearing away desk space immediately beneath the monitor, without having to resort to a permanent or semi-permanent installation. You’ll need a desktop that extends out beyond the legs or support by a few inches—most modern computer desks will do, but older styles with a “boxy” construction may be incompatible. Installation is easy, and requires only a screwdriver and a little elbow grease to secure the clamps in place.

一个中间选择是使用夹具式安装座，该安装座将立管或立臂连接到桌子的侧面。 这为您提供了清除显示器正下方的桌面空间的优势，而无需进行永久或半永久性安装。 您将需要一个桌面，该桌面可以延伸到腿部或支撑之外，只有几英寸长-大多数现代的电脑桌都可以，但是带有“ boxy”结构的较旧样式可能不兼容。 安装很容易，只需要一把螺丝刀和一点弯头油脂就可以将夹子固定到位。

Side-clamp mounts can be simple, with only a few pieces of steel, or elaborate, with multi-jointed arms supported by tightened bolts or even gas-spring mechanisms suspending the monitor over the desk and closer to your face. Some even have pass-through ports for handy extras, like USB and audio. In fact, the construction is simple enough that you can build one yourself if you’re handy with a few basic power tools.

侧夹安装架很简单， 只需几块钢 ，也可以很精致，其多关节臂由拧紧的螺栓或什至是气弹簧装置支撑，将显示器悬挂在桌子上并靠近您的脸部。 有些甚至具有用于方便使用的直通端口，例如USB和音频。 实际上，该结构非常简单，如果您方便使用一些基本的电动工具，则可以自己建造 。

桌前索环看台：重量级冠军 (Through-The-Desk Grommet Stands: Heavyweight Champions)

For a semi-permanent mount that takes up minimal space on your desk, a through-the-desk mount might just do the trick. These stands utilize a single, heavy-duty bolt that goes through a hole in the desk to secure the weight of both the stand and the monitor. Naturally, this limits your options, as you’ll need to either drill your own hole or have a desk with an existing one, like a standard cable management grommet hole. Of course, there’s no guarantee that these will be in the ideal spot for your monitor mount.

对于占用桌面空间最小的半永久性安装架，通过桌面安装架可能就可以解决问题。 这些支架利用单个重型螺栓穿过桌面上的Kong，以固定支架和显示器的重量。 自然，这会限制您的选择范围，因为您需要钻一个自己的Kong，或者拥有一个带有现有Kong的桌子，例如标准的电缆管理扣眼Kong。 当然，我们无法保证这些将是您的显示器安装的理想位置。

Through-the-desk stands tend to be popular with users who need to mount the maximum amount of weight combined with the minimum amount of desktop obstruction. Double, triple, and quadruple-monitor setups with through-the-desk mounts are common. Some models offer a choice: either a standard bolt mount fixed to the desk, a clamp for the side of the desk, or a huge weighted plate that sits on the desk in a freestanding style to counterbalance the weight of multiple monitors. They tend to be fairly cheap in single-monitor configurations, with prices increasing for more elaborate models.

桌面直立式架子在需要安装最大重量和最小桌面障碍物的用户中很受欢迎。 带有台式安装架的双显示器，三显示器和四显示器是常见的。 有些型号提供了选择：固定在桌子上的标准螺栓固定装置，桌子侧面的夹具，或者以独立式形式放置在桌子上的巨大配重板，以平衡多台显示器的重量。 在单显示器配置中，它们往往相当便宜，而对于更精巧的型号 ，价格会上涨。

壁挂式支架：适用于周围最漂亮的设置 (Wall Mounts: For the Slickest-Looking Setup Around)

Wall mounts are a popular option for users who want completely unobstructed desk space and an attractive work area. But thanks to more limited ergonomic positions, the need for a permanent installation on a wall (with a stud), and their unsuitability for most offices and rental properties, they need a lot of prerequisites.

壁挂式支架是想要完全不受阻碍的办公桌空间和有吸引力的工作区的用户的热门选择。 但是由于人体工学位置的限制，需要在墙壁上永久安装(带螺柱)，并且不适合大多数办公室和租赁物业，因此他们需要很多先决条件。

Even so, monitor wall mounts come in a lot of varieties, very much like the same mounts for televisions. The simplest and cheapest mount directly to one spot with no panning or tilting options. More complex variants add simple panning, panning and tilting plus rotation for landscape mode, simple jointed extension arms, and again, multi-joined gas spring stabilization arms. Prices will be about the same as for clamp-on varieties.

即使这样，监视器壁挂支架也有很多种类，非常类似于电视的相同壁挂支架。 最简单，最便宜的安装方式 ，无需摇动或倾斜即可直接安装到一个位置 。 更复杂的变体增加了横向模式的简单平移，平移和倾斜以及旋转， 简单的关节延伸臂 ，以及多 关节的 气弹簧稳定臂 。 价格将与固定品种相同。

One thing that wall mounts can’t handle well is multiple monitors. After two monitors (and not big ones), the weight is too much to mount to a single point, and you’ll have to resort to multiple mounts (on multiple studs).

壁挂支架不能很好地处理的一件事是多台显示器。 在安装了两个显示器(而不是大显示器)之后，重量太大了，无法安装到一个点上，您将不得不使用多个安装架(在多个螺柱上)。

多显示器设置的选项有限 (Multi-Monitor Setups Have Limited Options)

If you love the multitasking boost of multiple monitors like I do, your options for third-party mounts will generally get fewer and fewer the more monitors you add. Double-monitor models are available in all of the categories above, but triple-monitor setups are generally not offered in wall-mount options, due to the extra weight. Freestanding mounts (with a heavy steel stand counterweight) and through-the-desk mounts are much more common.

如果您像我一样喜欢多台显示器的多任务处理功能，那么您添加第三方显示器的选择通常会越来越少。 上面所有类别中都提供了双显示器型号，但由于壁重较大，壁挂式选件通常不提供三显示器设置。 独立式安装架(带有重型钢架配重)和台式安装架更为常见。

Once you expand to four or more monitors, you more or less have to go with premium, heavy-duty options in the freestanding, through-the-desk, or (less frequently) side-clamp options. And they won’t be cheap: quality steel pipe and arm versions start at around $100, going up to $400 or more for gas spring models.

一旦扩展到四台或更多台显示器，您就必须或多或少地在独立式，通过办公桌或(较少使用)侧夹选项中使用高级重型选项。 而且它们也不是便宜的：优质的钢管和臂版本起价为100美元左右，而气弹簧型号则高达400美元甚至更高。

Image credit: Amazon

图片来源： 亚马逊

翻译自: https://www.howtogeek.com/330187/how-to-pick-the-right-monitor-mount/

自制显示器支架