索尼rsv文件修复_索尼修复了崩溃的PS4，这是修复您的PS4的方法

索尼rsv文件修复

Over the weekend, a critical bug was found in the PlayStation 4 messaging system that would cause systems to crash if a particular character was displayed. Sony has now fixed the issue.

整个周末， 在PlayStation 4消息传递系统中发现了一个严重的错误，如果显示特定角色，该错误将导致系统崩溃。 索尼现在已解决此问题。

In short, malicious users were sending a very specific bit of text to other PS4 users that would send the system into a “crash loop.” Early reports indicated that the system would need to be factory reset in order to fix the problem, but Sony later outlined that wasn’t the case. Instead of resetting the system, you could simply use the console’s Rebuild Database function to get it back into working order. If you were affected by the crash bug, here’s what to do to get your console up and running.

简而言之，恶意用户向其他PS4用户发送了非常特定的文本，从而使系统陷入“崩溃循环”。 早期的报告指出，系统必须恢复出厂设置才能解决问题，但索尼后来概述了事实并非如此。 无需重置系统，您只需使用控制台的“重建数据库”功能即可使其恢复正常工作。 如果您受到崩溃错误的影响，请执行以下操作来启动和运行控制台。

We’ve since fixed the issue, and it wasn’t bricking consoles, just sending them into a crash loop that can be quickly fixed in under 5 minutes. Delete the message on the PS mobile app, go into Safe Mode, use Option 5, console back to normal. ^DB

此后，我们已经解决了该问题，这不是在阻塞控制台，只是将它们发送到崩溃循环中，可以在5分钟内快速修复。 删除PS移动应用上的消息，进入安全模式，使用选项5，将控制台恢复为正常。 ^ DB

— Ask PlayStation UK (@AskPS_UK) October 15, 2018

— Ask PlayStation UK(@AskPS_UK) ，2018年10月15日

If you’re not familiar with Safe Mode or how to get it up and running, here are the details:

如果您不熟悉安全模式或如何启动和运行它 ，请参阅以下详细信息：

Note: You’ll need to connect the controller through USB while in Safe Mode.

注意 ：在安全模式下，您需要通过USB连接控制器。

• Turn off the console completely, then long-press the power button until you hear a second beep (about seven seconds after the first one), then release. This will boot the console into Safe mode.
  完全关闭控制台，然后长按电源按钮，直到听到第二声蜂鸣声(大约在第一次蜂鸣声后七秒钟)，然后松开。 这会将控制台启动到安全模式。
• Choose option 5. Rebuild Database.
  选择选项5.重建数据库。
• Let it do its thing. After a few minutes, the console will be back to normal.
  让它做自己的事。 几分钟后，控制台将恢复正常。

Of course, you’ll also need to delete the message before firing the console back up, which you should do from the PlayStation Messages mobile app (iOS, Android).

当然，您还需要在启动控制台备份之前删除消息，这应该从PlayStation Messages移动应用程序( iOS ， Android )进行。

Fortunately, this shouldn’t be an issue at this point, because Sony fixed the problem. It looks like this was a backend fix, so consoles shouldn’t even require an update in the first place. It’s just…not a problem anymore.

幸运的是，目前这还不是问题，因为索尼已解决了该问题。 看来这是一个后端修复，因此控制台甚至根本不需要更新。 只是……不再是问题。

I hope you all survived The Great PS4 Brickening of 2018.

我希望大家都幸免于2018年的《伟大PS4 Brickening》。

via The Verge

通过边缘

翻译自: https://www.howtogeek.com/fyi/sony-fixes-crashing-ps4s-here’s-how-to-fix-yours/

索尼rsv文件修复