可视门铃 音视频传输方案_如何安装和设置SkyBell HD视频门铃

可视门铃 音视频传输方案

The SkyBell HD is a video doorbell that lets you see who’s at the door right from your smartphone and even talk to them without even opening your door. Here’s how to install the unit and set it up.

SkyBell HD是一个视频门铃，可让您直接从智能手机查看谁在门口，甚至不用打开门就可以与他们交谈。 这是安装和设置设备的方法。

The SkyBell HD is similar to the Ring Doorbell, with one difference: the SkyBell unit must be hooked up to your existing doorbell’s wiring. The Ring Doorbell has the ability to do this, but it also has an internal battery that can power the whole unit itself. The SkyBell doesn’t have this, but installation is still pretty easy if you don’t have to reroute your doorbell wires.

SkyBell HD与环形门铃相似，但有一个区别：SkyBell装置必须与现有门铃的接线连接。 环形门铃可以做到这一点，但它也有一个内部电池，可以为整个装置供电。 SkyBell没有此功能，但是如果您不必重新布线门铃电线，安装仍然非常容易。

第一步：卸下现有的门铃 (Step One: Remove Your Existing Doorbell)

In order to get to your doorbell’s wiring, you’ll need to first remove the doorbell button, which is usually mounted to the exterior wall of your house with two small screws that come right out with a screwdriver.

为了连接门铃，您需要先卸下门铃按钮，通常用两个小螺丝刀将其安装在房屋的外墙上，这些小螺丝刀是用螺丝刀拧出的。

Once you have these screws out, you can pull out the doorbell button to expose more of the doorbell wires underneath. If you see two small wires, then the SkyBell is compatible. However, if your doorbell setup isn’t like this, then the SkyBell won’t be compatible. Don’t worry, though, as 99% of doorbells use two small wires.

拧下这些螺钉后，您可以拉出门铃按钮以露出下面的更多门铃线。 如果看到两条细线，则表明SkyBell是兼容的。 但是，如果您的门铃设置不是这样，则SkyBell将不兼容。 不过请放心，因为99％的门铃使用两条细线。

Most doorbell buttons will have two small wires connected to it.

大多数门铃按钮将连接两根细线。

At this point, you can shut off the power to these wires by turning off the breaker that goes to the wires. However, in most cases, doorbell wiring is low voltage, and touching them won’t shock you or anything like that. However, if you want to be absolutely safe and/or are paranoid, there’s no harm in shutting off the breaker.

此时，您可以通过断开连接到电线的断路器来切断这些电线的电源。 但是，在大多数情况下，门铃的接线是低压的，触摸它们不会使您或类似物体受到震动。 但是，如果您想绝对安全和/或偏执，关闭断路器不会有任何危害。

There will be two small wires connected to the back of the doorbell and they’ll be connected by small screws. Loosen these screws and remove the two wires from the doorbell button. At this point, your doorbell wires are ready to go.

门铃的背面将连接两根细电线，它们将通过小螺钉连接。 松开这些螺丝，然后从门铃按钮上拆下两根电线。 此时，您的门铃电线已准备就绪。

第二步：安装SkyBell HD单元 (Step Two: Install the SkyBell HD Unit)

Grab the mounting plate that came with your SkyBell and hold it up to your exterior wall where you want the unit to be mounted, and mark with a pencil where the two mounting screws will be drilled.

抓住SkyBell随附的安装板，将其固定在要安装本机的外墙上，并用铅笔标记要钻出两个安装螺钉的位置。

If the exterior of your house is brick or masonry, you’ll need to use the included drill bit to drill holes where you made marks, and then insert in the two yellow wall anchors before screwing on the mounting plate. If your exterior is wood, all you need to do is drill pilot holes using a drill bit that’s a tad smaller than the included screws.

如果房屋的外部是砖砌或砖石建筑，则需要使用随附的钻头在您做标记的地方钻Kong，然后在拧紧安装板之前将其插入两个黄色墙锚中。 如果您的外部是木质的，那么您所要做的就是使用比附带的螺钉小一点的钻头钻出导向Kong。

After that, screw in the mounting plate using the included screws. Be sure to feed the doorbell wires through the big hole in the center of the plate before mounting it.

之后，使用随附的螺钉拧入安装板。 在安装门铃之前，请确保穿过门板中心的大Kong。

Take the two doorbell wires and wrap each one around its own screw on the left side, and then tighten the screws down. Make sure that the two wires aren’t touching each other. It also doesn’t matter which wire goes to which screw, because the button will simply close the circuit between the two wires to make your doorbell chime go off.

拿起两根门铃线，将每根线缠绕在左侧的螺丝上，然后拧紧螺丝。 确保两条线没有互相接触。 哪根导线连接到哪个螺钉也无关紧要，因为按钮会简单地关闭两根导线之间的电路，使您的门铃响起。

Next, grab the SkyBell HD unit and begin placing it over the mounting plate. Start by placing the tab at the top of the unit inside the slot on the mounting plate.

接下来，抓住SkyBell HD装置并开始将其放在安装板上。 首先将凸舌放在单元顶部的安装板上的插槽内。

After that, press down the rest of the unit onto the mounting plate. Then, use a screwdriver to drive in the screw on the bottom of the unit to lock it in place.

之后，将设备的其余部分向下压到安装板上。 然后，使用螺丝刀拧入设备底部的螺钉以将其锁定到位。

Once the SkyBell is mounted, it will automatically boot up and will alternate between red and green lights.

一旦安装了SkyBell，它将自动启动并在红灯和绿灯之间切换。

第三步：下载并设置SkyBell应用 (Step Three: Download and Set Up the SkyBell App)

Go to the App Store on your iOS device or the Play Store on your Android device and download the SkyBell HD app (iOS, Android).

转到iOS设备上的App Store或Android设备上的Play商店，然后下载SkyBell HD应用程序( iOS ， Android )。

Once it’s installed, open it up and tap on “Sign Up”.

安装完成后，将其打开并点击“注册”。

Enter in your email address, create a password, and type in your name. Then tap on “Sign up”.

输入您的电子邮件地址，创建一个密码，然后输入您的姓名。 然后点击“注册”。

On the next screen, tap on “Add a new SkyBell”.

在下一个屏幕上，点击“添加新的SkyBell”。

Tap on “OK let’s begin” at the bottom.

点击底部的“确定，让我们开始”。

Make sure that your SkyBell unit is flashing green and red. If not follow the instructions on the screen. If everything looks good, tap on “Next” at the bottom.

确保您的SkyBell设备闪烁绿色和红色。 如果没有，请按照屏幕上的说明进行操作。 如果一切看起来不错，请点击底部的“下一步”。

After that, if you’re on an iOS device, close out of the app temporarily and open up the Settings app and select “Wi-Fi”. If you’re on an Android device, you’ll simply select your home’s Wi-Fi network, which is detailed a couple of steps later on.

之后，如果您使用的是iOS设备，请暂时关闭该应用，然后打开“设置”应用，然后选择“ Wi-Fi”。 如果您使用的是Android设备，则只需选择家庭的Wi-Fi网络，稍后将详细介绍该步骤。

Tap on the SkyBell HD Wi-Fi SSID in the list to connect to it.

在列表中点击“ SkyBell HD Wi-Fi SSID”以连接到它。

Once connected, go back into the SkyBell app. Select your home’s Wi-Fi network and then tap on “Next” at the bottom.

连接后，返回SkyBell应用程序。 选择您家庭的Wi-Fi网络，然后点击底部的“下一步”。

On the next screen, enter in the password for your Wi-Fi network and tap on “Go” or “Next”.

在下一个屏幕上，输入Wi-Fi网络的密码，然后点击“执行”或“下一步”。

Your SkyBell HD will spend a few moments to configure and connect to your home’s Wi-Fi network.

您的SkyBell HD将花费一些时间来配置并连接到家庭的Wi-Fi网络。

Once complete, tap on “Go to my SkyBell” at the bottom of the screen.

完成后，点击屏幕底部的“转到我的SkyBell”。

You’ll be taken to the main screen of the app, where you can see a live view of the camera, as well as view recent activity of your doorbell. It might be blank at first, but once you get some activity going, the main screen will begin to populate. You can also tap on the gear icon in the top-right corner to access the settings.

您将被带到应用程序的主屏幕，在该屏幕上您可以看到摄像头的实时视图，以及查看门铃的最近活动。 一开始可能是空白的，但是一旦您进行了一些活动，主屏幕就会开始填充。 您也可以点击右上角的齿轮图标以访问设置。

翻译自: https://www.howtogeek.com/270743/how-to-install-and-set-up-the-skybell-hd-video-doorbell/

可视门铃 音视频传输方案