Are you looking for a way to control your PC from across the room? Today we look at how you can turn your iPhone and iPod Touch into a remote control with HippoRemote Lite.
您是否正在寻找一种从整个房间控制PC的方法？ 今天，我们来看看如何使用HippoRemote Lite将iPhone和iPod Touch变成遥控器。
What You’ll Need:
您需要什么：
- Windows, Mac, or Linux host computer. (Are steps below are shown in Windows 7) Windows，Mac或Linux主机。 (以下步骤在Windows 7中显示)
- HippoVNC server software installed on your host computer. (Linux users can use included VNC server software) 主机上已安装HippoVNC服务器软件。 (Linux用户可以使用随附的VNC服务器软件)
- HippoRemote Lite app installed from the App Store. 从App Store安装的HippoRemote Lite应用程序。
- A WiFi router. WiFi路由器。
HippoVNC Server Install
HippoVNC服务器安装
Download the HippoVNC Server file. The link can be found at the end of the article.
下载HippoVNC服务器文件。 该链接可以在文章末尾找到。
Open the file and select Run.
打开文件，然后选择运行。
Choose a folder to which you’d like to extract the file.
选择您要提取文件的文件夹。
Run the WinVNC.exe file.
运行WinVNC.exe文件。
If prompted by your firewall application, choose to allow access to HippoVNC.
如果防火墙应用程序提示，请选择允许访问HippoVNC。
In the Settings window, type in a password under Authentication and select OK.
在“设置”窗口中，在“身份验证”下键入密码，然后选择“确定”。
Next, if you don’t have iTunes installed on your PC, you’ll need to obtain the IP Address of your host machine. There are plenty of ways to go about this, but the easiest is to hover you mouse over the HippoRemote Lite icon in the System Tray.
接下来，如果您的PC上没有安装iTunes，则需要获取主机的IP地址。 有很多解决方法，但是最简单的方法是将鼠标悬停在系统任务栏中的HippoRemote Lite图标上。
Note: If iTunes is installed on the host computer, HippoRemote can automatically detect your computer, so you won’t need to enter the IP address.
注意：如果主机上安装了iTunes，则HippoRemote可以自动检测您的计算机，因此您无需输入IP地址。
Running HippoVNC as a Service
运行HippoVNC即服务
If you’d like HippoVNC to run every time you start your PC, you can run it as a service. (Otherwise you’ll need to start it manually each time you want to use it.) To run HippoVNC as a service, right click on the System Tray icon and select Install Service.
如果希望每次启动PC时都运行HippoVNC，则可以将其作为服务运行。 (否则，每次使用它时，都需要手动启动它。)要将HippoVNC作为服务运行，请右键单击系统任务栏图标，然后选择“安装服务”。
Next, you’ll need to connect your iPhone or iPod Touch to your WiFi network. Once you are connected, open the HippoRemote Lite App and select Add Connection.
接下来，您需要将iPhone或iPod Touch连接到WiFi网络。 连接后，打开HippoRemote Lite应用程序，然后选择添加连接。
Type in the IP Address for host and the password you entered earlier on the HippoVNC Settings window. Tap Done when finished.
在“ HippoVNC设置”窗口中输入主机的IP地址和您先前输入的密码。 完成后，点击完成。
You should now see your computer’s IP address appear under Saved Connections. Select it to connect to your PC.
现在，您应该看到计算机的IP地址出现在“已保存的连接”下。 选择它以连接到您的PC。
You’ll be greeted by the HippoRemote Settings screen where can can make certain adjustments such as tracking and scrolling speed. Some options, such as setting macros, are only available in the full (commercial) version of HippoRemote. Tap the Trackpad button at the top left to switch to the trackpad.
HippoRemote Settings(Hippo远程设置)屏幕会打招呼，您可以在其中进行某些调整，例如跟踪和滚动速度。 某些选项(例如设置宏)仅在完整(商业)版本的HippoRemote中可用。 点击左上方的触控板按钮以切换到触控板。
Now you’re ready to control your computer. To move the cursor on the computer screen, flick or drag your finger across the trackpad.
现在您可以控制计算机了。 要在计算机屏幕上移动光标，请在触控板上轻拂或拖动手指。
The buttons at the top act as right and left mouse buttons. Simply tap them for right and left mouse clicks.
顶部的按钮充当鼠标左右键。 只需点击它们即可左右鼠标单击。
Select the Keyboard button to switch to bring up the onscreen keyboard mode enter text.
选择键盘按钮进行切换以调出屏幕键盘模式，输入文字。
The Split Screen button will give you both the keyboard and trackpad at the same time.
“分屏”按钮将同时为您提供键盘和触控板。
Conclusion
结论
HippoRemote Lite is a slick and easy way to control your PC from your iPhone or iPod Touch. If you are interested in some of extra features available in the commercial version of HippoRemote, check out our review of HippoRemote Pro 2.2.
HippoRemote Lite是一种通过iPhone或iPod Touch控制您的PC的简便快捷方式。 如果您对HippoRemote商业版中可用的某些其他功能感兴趣，请查看我们对HippoRemote Pro 2.2的评论。
1089
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
