megaraid bios
The LSI MegaRAID is widely used like in IBM x3620M3 servers. This post introduces the process with screenshots of how to configure the new disks and set up RAID0 in the MegaRAID BIOS for reference by other and myself. It is illustrated with one example by adding a new 2TB hard disk and creating a new RAID0 with the disk only (yes, we do this to expose the raw disk to the Linux OS).
LSI MegaRAID与IBM x3620M3服务器一样被广泛使用。 这篇文章介绍了该过程,并提供了有关如何配置新磁盘和在MegaRAID BIOS中设置RAID0的屏幕截图的信息,以供他人和本人参考。 通过添加一个新的2TB硬盘并仅使用该磁盘创建一个新的RAID0来举例说明(是的,我们这样做是将原始磁盘公开给Linux OS)。
There are two major steps with minor steps in each.
有两个主要步骤,每个步骤都有次要步骤。
将磁盘设置为Unconf良好状态∞ (Setting the disk into Unconf Good status ∞)
Enter the Physical View; Choose the corresponding disk and press ENTER:
进入物理视图; 选择相应的磁盘,然后按Enter: