记一次新插入磁盘做raid 10

华为的主机能够使用/opt/MegaRAID/MegaCli/MegaCli64

问题：

当新插入磁盘时候会出现‘The specified physical disk does not have the appropriate attributes to complete’的错误，说指定的物理磁盘没有适当的属性完成。

[root@A03-R12-I69-200-J33FE1K ~]# /opt/MegaRAID/MegaCli/MegaCli64 -CfgSpanAdd -r10 -Array0[8:0,8:1] -Array1[8:2,8:3] WB Direct -a0

The specified physical disk does not have the appropriate attributes to complete
the requested command.

Exit Code: 0x26

去扫描有4块盘是新插入的没有进行清除。

[root@A03-R12-I69-200-J33FE1K ~]# /opt/MegaRAID/MegaCli/MegaCli64 -cfgforeign -scan -a0

There are 4 foreign configuration(s) on controller 0.

Exit Code: 0x00

将新插入的磁盘进行清除

[root@A03-R12-I69-200-J33FE1K ~]# /opt/MegaRAID/MegaCli/MegaCli64 -cfgforeign -clear -a0

Foreign configuration 0 is cleared on controller 0.
Foreign configuration 1 is cleared on controller 0.
Foreign configuration 2 is cleared on controller 0.
Foreign configuration 3 is cleared on controller 0.

Exit Code: 0x00

组raid10 成功

[root@A03-R12-I69-200-J33FE1K ~]# /opt/MegaRAID/MegaCli/MegaCli64 -CfgSpanAdd -r10 -Array0[8:0,8:1] -Array1[8:2,8:3] WB Direct -a0

Adapter 0: Created VD 1

Adapter 0: Configured the Adapter!!

Exit Code: 0x00

显示：

[root@A03-R12-I69-200-J33FE1K ~]# lsblk
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 557.9G  0 disk
├─sda1   8:1    0     1G  0 part /boot
├─sda2   8:2    0    16G  0 part
├─sda3   8:3    0   100G  0 part /
└─sda4   8:4    0 440.9G  0 part /export
sdb      8:16   0   2.2T  0 disk

其他基础命令：

/opt/MegaRAID/MegaCli/MegaCli64 -ldpdinfo -aall | egrep "(Virtual Drive|Inquiry Data)"

/opt/MegaRAID/MegaCli/MegaCli64 -pdlist -a0|egrep 'Slot Number|Firmware state'

/opt/MegaRAID/MegaCli/MegaCli64 -PDlist -a0|grep "Enclosure Device"|head -1