agp模式_AGP的完整形式是什么？

agp模式

AGP：加速图形端口 (AGP: Accelerated Graphics Port )

AGP is an abbreviation of the "Accelerated Graphics Port".

AGP是“加速图形端口”的缩写 。

It was created and developed as a high-speed point-to-point channel for putting together a video card to a system of the computer, first and foremost to help out and support the acceleration of 3D computer graphics. It was at the beginning created and developed as a descendant to PCI-type connections for video cards. As of 2004, AGP has been gradually carried out in regular stages in support of PCI Express; by mid-2008, PCI Express cards have taken over the market and simply a small number of AGP models were obtainable and accessible, with GPU manufacturers and add-in board partners in due course reducing support for the interface in support of PCI Express.

它是作为高速点对点通道而创建和开发的，用于将视频卡放到计算机系统中，首先是帮助并支持3D计算机图形的加速。 它最初是作为视频卡的PCI类型连接的后代而创建和开发的。 从2004年开始， AGP已逐步定期进行，以支持PCI Express。 到2008年年中，PCI Express卡已经占领了市场，只有少量AGP型号可供使用，GPU制造商和附加板合作伙伴会适时减少对接口的支持，以支持PCI Express。

AGP历史 (AGP History)

• The AGP slot first came out and emerged on x86-compatible system boards based on Socket 7 Intel P5 Pentium and Slot 1 P6 Pentium II processors.

  AGP插槽首次出现并出现在基于Socket 7 Intel P5 Pentium和Slot 1 P6 Pentium II处理器的x86兼容系统板上。

• On August 26, 1997, Intel launched AGP support with the i440LX Slot 1 chipset, and an overflow of products followed from the entire most significant system board sellers.

  1997年8月26日，英特尔推出了i440LX Slot 1芯片组对AGP的支持，随后，整个最重要的系统板销售商也纷纷涌入产品。

AGP版本 (AGP Versions)

• In 1997, Intel launched "AGP specification 1.0".

  1997年，英特尔推出了“ AGP规范1.0”。

• It mentioned 3.3 V signals and 1× and 2× speeds.

  它提到了3.3 V信号以及1倍和2倍速度。

• Specification 2.0 documented 1.5 V signaling, which could be used at 1×, 2× and the further 4× speed and 3.0 supplemented 0.8 V signaling, which could be controlled and managed at 4× and 8× speeds.

  规范2.0记录了1.5 V信号，可以以1倍，2倍以及进一步的4倍速度使用，而3.0补充了0.8 V信号，可以以4倍和8倍的速度进行控制和管理。

Existing versions are listed below in the given following table.

现有版本在下表中列出。

Specification	Voltage	Clock	Speed	Transfers/clock	Rate (MB/s)
PCI	3.3/5 V	33 MHz	—	1	133
PCI 2.1	3.3/5 V	33/66 MHz	—	1	133/266
AGP 1.0	3.3 V	66 MHz	1×	1	266
AGP 1.0	3.3 V	66 MHz	2×	2	533
AGP 2.0	1.5 V	66 MHz	4×	4	1066
AGP 3.0	0.8 V	66 MHz	8×	8	2133
AGP 3.5*	0.8 V	66 MHz	8×	8	2133

规范	电压	时钟	速度	传输/时钟	速率(MB /秒)
PCI接口	3.3 / 5伏	33兆赫	-	1个	133
PCI 2.1	3.3 / 5伏	33/66兆赫	-	1个	133/266
AGP 1.0	3.3伏	66兆赫	1×	1个	266
AGP 1.0	3.3伏	66兆赫	2×	2	533
AGP 2.0	1.5伏	66兆赫	4×	4	1066
AGP 3.0	0.8伏	66兆赫	8×	8	2133
AGP 3.5 *	0.8伏	66兆赫	8×	8	2133

官方扩展 (Official Extensions)

AGP Pro

AGP专业版

• An official extension for cards that needed more electrical power, with an extended slot with supplemented pins for that purpose.

  这是需要更多电力的卡的官方扩展，带有用于此目的的扩展插槽和补充的插针。

• AGP Pro cards were generally workstation-class cards used to accelerate professional computer-aided design applications made use of in the fields of architecture, machining, engineering, simulations, and related fields.

  AGP Pro卡通常是工作站级卡，用于加速在建筑，机械加工，工程，模拟和相关领域中使用的专业计算机辅助设计应用程序。

64-bit AGP

64位AGP

• A 64-bit channel was formerly projected as an elective standard for AGP 3.0 in draft documents, other than it was dropped in the last version of the standard.

  以前在文档草稿中计划将64位通道作为AGP 3.0的可选标准，但该标准的最新版本中已删除了该通道。

• The standard enables 64-bit transfer for AGP8× reads, writes, and fast writes; 32-bit transfer for PCI operations.

  该标准支持AGP8×读取，写入和快速写入的64位传输。 PCI操作的32位传输。

Reference: Accelerated_Graphics_Port

参考： Accelerated_Graphics_Port

翻译自: https://www.includehelp.com/dictionary/agp-full-form.aspx

agp模式