24.根据下图中展示的show running-config命令的结果。网络管理员该如何做才能允许工作站连接到FastEthernet 0/0接口去获得一个IP地址
A. Apply access-group 14 to interface FastEthernet 0/0.
A.在接口FastEthernet 0/0应用access-group 14
B. Add access-list 14 permit any any to the access list configuration.
B.在access-list 14中添加access-list 14 permit any any
C. Configure the IP address of the FastEtherent 0/0 interface to. 10.90.201.1
C.配置FastEtherent 0/0接口的IP地址为10.90.201.1
D. Add an interface description to the FastEthernet 0/0 interface configuration.
D.为接口FastEthernet 0/0添加一个接口描述
Answer: C
25. Refer to the exhibit. The networks connected to router R2 have been summarized as a 192.168.176.0/21 route and sent to R1. Which two packet destination addresses will R1 forward to R2? (Choose two.)
25.根据下图,网络连接到路由器R2被汇总为一条192.168.176.0/21的路由,并发给R1。哪两个数据包目的地址R1会转发给R2
A. 192.168.194.160
B. 192.168.183.41
C. 192.168.159.2
D. 192.168.183.255
E. 192.168.179.4
F. 192.168.184.45
Answer: BE