CentOS 7网卡绑定

创建逻辑接口，指定算法

nmcli connection add ifname team100 con-name team100 type team config '{    "runner":{"name": "lacp", "active": true, "fast_rate": true, "tx_hash": ["eth", "ipv4"]},"link_watch": {"name": "ethtool"}}'

配置IP地址及网关

nmcli connection modify team100 ipv4.address 10.203.37.11/24 ipv4.gateway 10.203.37.253

配置接口获取IP地址的方式

nmcli connection modify team100 ipv4.method manual

将物理口加入逻辑口

nmcli connection add ifname enp25s0f0 con-name team100-1 type team-slave master team100

nmcli connection add ifname enp25s0f1 con-name team100-2 type team-slave master team100

查看逻辑接口状态

teamdctl team100 state view

 

总结：

配置team前，物理网口不要配置IP地址。

配置完成后，需要systemctl restart network，如果报错，执行一次systemctl start network。

交换机需要将lacp改成dynamic。