树莓派启动后安装向日葵客户端用于唤醒局域网其他机器

11:05 2024/6/11

树莓派启动后安装向日葵客户端

reated symlink /etc/systemd/system/multi-user.target.wants/phtunnel.service → /lib/systemd/system/phtunnel.service.
Installation, please later...
Successful installation of Phddns Service.

 +--------------------------------------------------+
 |           Oray Phtunnel Raspberry 5.1.0          |
 +--------------------------------------------------+
 |  SN: oray009d64ee39e2   Default password: admin  |
 +--------------------------------------------------+
 |    Remote Management Address http://b.oray.com   |
 +--------------------------------------------------+

①树莓派3.0.3版本命令格式为：systemctl start phddns
其中start为命令操作，stop（停止）|restart（重启） |status（状态）|version（版本）|reset（重置）同理
树莓派3.0.0-3.0.2版本操作命令相同，具体如下：
卸载：dpkg -r phddns

每小时自动重启花生壳
15:39 2024/6/12
crontab -e
0 */1 * * * /a/r1.sh
定时任务内的内容 
#!/bin/bash
sudo /bin/phddns restart
sudo /bin/phtunnel restart &

共享放在sda1的启动挂载
administrator@raspberrypi:~ $ sudo blkid /dev/sda1
/dev/sda1: LABEL="320" BLOCK_SIZE="512" UUID="6818E4E518E4B36C" TYPE="ntfs" PARTUUID="24052501-01"

sudo vi /etc/fstab

proc            /proc           proc    defaults          0       0
PARTUUID=ab4e1900-01  /boot           vfat    defaults          0       2
PARTUUID=ab4e1900-02  /               ext4    defaults,noatime  0       1
# a swapfile is not a swap partition, no line here
#   use  dphys-swapfile swap[on|off]  for that
PARTUUID=24052501-01  /a/3               ntfs    defaults  0       0

sudo vi /etc/samba/smb.conf
[a_3]
   comment = a_3
   path = /a/3
   guest ok = no
   browseable = yes
   create mask = 0600
   directory mask = 0700
   read only = no

sudo smbpasswd -a root

这样局域网windows使用
\\raspberrypi
或者
\\192.168.199.46

下面安装树莓派唤醒功能，这样回家可以远程开局域网任何一台可以网卡唤醒的机器
用于唤醒其他物理电脑，里面可以安装todesk或者向日葵
3楼办公电脑
sudo apt install wakeonlan
wakeonlan <待唤醒计算机的MAC地址>00-E0-7B-68-11-62

sudo wakeonlan 00:E0:7B:68:11:62
192.168.199.54

端口映射

netsh interface portproxy add v4tov4 listenaddress=127.0.0.1 listenport=445 connectaddress=123.123.123.123  connectport=8888
netsh interface portproxy show all

本地监听445，转发到目标服务器ip和端口
netsh interface portproxy add v4tov4 listenport=445 listenaddress=127.0.0.1 connectport=新端口 connectaddress=服务器IP地址
netsh interface portproxy show all