+ cd qtbase
+ D:\Project\FrameProject\qtcode5.6.0\qtbase\configure.bat -top-level -help
Usage: configure [options]
Installation options:
These are optional, but you may specify install directories.
-prefix <dir> ...... The deployment directory, as seen on the target
device.
(default %CD%)
-extprefix <dir> ... The installation directory, as seen on the host
machine.
(default SYSROOT/PREFIX)
-hostprefix [dir] .. The installation directory for build tools running on
the
host machine. If [dir] is not given, the current build
directory will be used. (default EXTPREFIX)
You may use these to change the layout of the install. Note that all
directories
except -sysconfdir should be located under -prefix/-hostprefix:
-bindir <dir> ...... User executables will be installed to <dir>
(default PREFIX/bin)
-libdir <dir> ...... Libraries will be installed to <dir>
(default PREFIX/lib)
-headerdir <dir> ... Headers will be installed to <dir>
(default PREFIX/include)
-archdatadir <dir> . Architecture-dependent data used by Qt will be
installed to <dir>
(default PREFIX)
-libexecdir <dir> .. Program executables will be installed to <dir>
(default ARCHDATADIR/bin)
-plugindir <dir> ... Plugins will be installed to <dir>
(default ARCHDATADIR/plugins)
-importdir <dir> ... Imports for QML1 will be installed to <dir>
(default ARCHDATADIR/imports)
-qmldir <dir> ...... Imports for QML2 will be installed to <dir>
(default ARCHDATADIR/qml)
-datadir <dir> ..... Data used by Qt programs will be installed to <dir>
(default PREFIX)
-docdir <dir> ...... Documentation will be installed to <dir>
(default DATADIR/doc)
-translationdir <dir> Translations of Qt programs will be installed to
<dir>
(default DATADIR/translations)
-examplesdir <dir> . Examples will be installed to <dir>
(default PREFIX/examples)
-testsdir <dir> .... Tests will be installed to <dir>
(default PREFIX/tests)
-hostbindir <dir> .. Host executables will be installed to <dir>
(default HOSTPREFIX/bin)
-hostlibdir <dir> .. Host libraries will be installed to <dir>
(default HOSTPREFIX/lib)
-hostdatadir <dir> . Data used by qmake will be installed to <dir>
(default HOSTPREFIX)
Configure options:
The defaults (*) are usually acceptable. A plus (+) denotes a default value
that needs to be evaluated. If the evaluation succeeds, the feature is
included. Here is a short explanation of each option:
-release ........... Compile and link Qt with debugging turned off.
* -debug ............. Compile and link Qt with debugging turned on.
+ -debug-and-release . Compile and link two Qt libraries, with and without
debugging turned on.
-force-debug-info .. Create symbol files for release builds.
-separate-debug-info Strip debug information into a separate file.
-developer-build ... Compile and link Qt with Qt developer options
(including auto-tests exporting)
-optimized-tools ... Build optimized host tools even in debug build.
-no-optimized-tools Do not build optimized host tools even in debug build.
-opensource ........ Compile and link the Open-Source Edition of Qt.
-commercial ........ Compile and link the Commercial Edition of Qt.
-c++std <edition> .. Compile Qt with C++ standard edition (c++98, c++11,
c++14, c++1z)
Default: highest supported. This option is not
supported for MSVC.
-use-gold-linker ... Link using the GNU gold linker (gcc only).
* -no-use-gold-linker Do not link using the GNU gold linker.
-enable-new-dtags .. Use new DTAGS for RPATH (Linux only).
* -disable-new-dtags . Do not use new DTAGS for RPATH.
* -shared ............ Create and use shared Qt libraries.
-static ............ Create and use static Qt libraries.
* -static-runtime .... Statically link the C/C++ runtime library.
-ltcg .............. Use Link Time Code Generation. (Release builds only)
* -no-ltcg ........... Do not use Link Time Code Generation.
-make <part> ....... Add part to the list of parts to be built at make time
libs
tools
examples
-nomake <part> ..... Exclude part from the list of parts to be built.
-skip <module> ..... Exclude an entire module from the build.
-no-compile-examples Install only the sources of examples.
-no-widgets ........ Disable Qt Widgets module.
-no-gui ............ Disable Qt GUI module.
-no-accessibility .. Disable accessibility support.
................... Disabling accessibility is not recommended, as it will
break QStyle
and may break other internal parts of Qt.
With this switch you create a source incompatible
version of Qt,
which is unsupported.
* -accessibility ..... Enable accessibility support.
-no-sql-<driver> ... Disable SQL <driver> entirely, by default none are
turned on.
-qt-sql-<driver> ... Enable a SQL <driver> in the Qt Library.
-plugin-sql-<driver> Enable SQL <driver> as a plugin to be linked to at run
time.
Available values for <driver>:
mysql
psql
oci
odbc
tds
db2
+ sqlite
sqlite2
ibase
(drivers marked with a '+' have been detected as
available on this system)
-system-sqlite ..... Use sqlite from the operating system.
-no-opengl ......... Do not support OpenGL.
-opengl <api> ...... Enable OpenGL support with specified API version.
Available values for <api>:
desktop - Enable support for Desktop OpenGL
dynamic - Enable support for dynamically loaded
OpenGL (either desktop or ES)
* es2 - Enable support for OpenGL ES 2.0
* -no-openvg ......... Disables OpenVG functionality.
-openvg ............ Enables OpenVG functionality.
-force-asserts ..... Activate asserts in release mode.
-platform <spec> ... The operating system and compiler you are building on.
(default %QMAKESPEC%)
-xplatform <spec> .. The operating system and compiler you are cross
compiling to.
See the README file for a list of supported operating
systems and compilers.
-target ............ Set target OS version. Currently the only valid value
is 'xp' for targeting Windows XP.
MSVC >= 2012 targets Windows Vista by default.
-sysroot <dir> ..... Sets <dir> as the target compiler's and qmake's
sysroot and also sets pkg-config paths.
-no-gcc-sysroot .... When using -sysroot, it disables the passing of
--sysroot to the compiler.
-qconfig <local> ... Use src/corelib/global/qconfig-<local>.h rather than
the
default 'full'.
* -no-nis ............ Do not compile NIS support.
-nis ............... Compile NIS support.
-no-iconv .......... Do not enable support for iconv(3).
+ -iconv ............. Enable support for iconv(3).
+ -sun-iconv ......... Enable support for iconv(3) using sun-iconv.
+ -gnu-iconv ......... Enable support for iconv(3) using gnu-libiconv.
-no-evdev .......... Do not enable support for evdev.
+ -evdev ............. Enable support for evdev.
-no-mtdev .......... Do not enable support for mtdev.
+ -mtdev ............. Enable support for mtdev.
+ -inotify ........... Explicitly enable Qt inotify(7) support.
-no-inotify ........ Explicitly disable Qt inotify(7) support.
+ -eventfd ........... Enable eventfd(7) support in the UNIX event loop.
-no-eventfd ........ Disable eventfd(7) support in the UNIX event loop.
* -largefile ......... Enables Qt to access files larger than 4 GB.
-posix-ipc ......... Enable POSIX IPC.
-glib .............. Compile Glib support.
-sysconfdir <dir> .. Settings used by Qt programs will be looked for in
<dir>.
-system-proxies .... Use system network proxies by default.
* -no-system-proxies . Do not use system network proxies by default.
+ -warnings-are-errors Make warnings be treated as errors.
-no-warnings-are-errors Make warnings be treated normally.
-qtnamespace <name> Wraps all Qt library code in 'namespace name {...}'.
-qtlibinfix <infix> Renames all Qt* libs to Qt*<infix>.
-D <define> ........ Add an explicit define to the preprocessor.
-I <includepath> ... Add an explicit include path.
-L <librarypath> ... Add an explicit library path.
-l <libraryname> ... Add an explicit library name, residing in a
librarypath.
-help, -h, -? ...... Display this information.
Third Party Libraries:
-qt-zlib ........... Use the zlib bundled with Qt.
+ -system-zlib ....... Use zlib from the operating system.
See http://www.gzip.org/zlib
-qt-pcre ........... Use the PCRE library bundled with Qt.
+ -system-pcre ....... Use the PCRE library from the operating system.
See http://pcre.org/
-icu ............... Use the ICU library.
* -no-icu ............ Do not use the ICU library.
See http://site.icu-project.org/
-no-gif ............ Do not compile GIF reading support.
-no-libpng ......... Do not compile PNG support.
-qt-libpng ......... Use the libpng bundled with Qt.
+ -system-libpng ..... Use libpng from the operating system.
See http://www.libpng.org/pub/png
-no-libjpeg ........ Do not compile JPEG support.
-qt-libjpeg ........ Use the libjpeg bundled with Qt.
+ -system-libjpeg .... Use libjpeg from the operating system.
See http://www.ijg.org
-no-freetype ....... Do not compile in Freetype2 support.
* -qt-freetype ....... Use the libfreetype bundled with Qt.
-system-freetype ... Use the libfreetype provided by the system.
-fontconfig ........ Build with FontConfig support.
* -no-fontconfig ..... Do not build with FontConfig support.
-no-harfbuzz ....... Do not compile in HarfBuzz-NG support.
* -qt-harfbuzz ....... Use HarfBuzz-NG bundled with Qt to do text shaping.
It can still be disabled by setting
the QT_HARFBUZZ environment variable to "old".
-system-harfbuzz ... Use HarfBuzz-NG from the operating system
to do text shaping. It can still be disabled
by setting the QT_HARFBUZZ environment variable to
"old".
See http://www.harfbuzz.org
+ -angle ............. Use the ANGLE implementation of OpenGL ES 2.0.
-no-angle .......... Do not use ANGLE.
See http://code.google.com/p/angleproject/
Qt for Windows only:
-no-incredibuild-xge Do not add IncrediBuild XGE distribution commands to
custom build steps.
+ -incredibuild-xge .. Add IncrediBuild XGE distribution commands to custom
build steps. This will distribute MOC and UIC steps,
and other custom buildsteps which are added to the
INCREDIBUILD_XGE variable.
(The IncrediBuild distribution commands are only added
to Visual Studio projects)
* -no-plugin-manifests Do not embed manifests in plugins.
-plugin-manifests .. Embed manifests in plugins.
-no-qmake .......... Do not compile qmake.
* -qmake ............. Compile qmake.
-qreal [double|float] typedef qreal to the specified type. The default is
double.
Note that changing this flag affects binary
compatibility.
-no-rtti ........... Do not compile runtime type information.
* -rtti .............. Compile runtime type information.
-no-strip .......... Do not strip libraries and executables of debug info
when installing.
* -strip ............. Strip libraries and executables of debug info when
installing.
-no-sse2 ........... Do not compile with use of SSE2 instructions.
+ -sse2 .............. Compile with use of SSE2 instructions.
-no-sse3 ........... Do not compile with use of SSE3 instructions.
+ -sse3 .............. Compile with use of SSE3 instructions.
-no-ssse3 .......... Do not compile with use of SSSE3 instructions.
+ -ssse3 ............. Compile with use of SSSE3 instructions.
-no-sse4.1 ......... Do not compile with use of SSE4.1 instructions.
+ -sse4.1 ............ Compile with use of SSE4.1 instructions.
-no-sse4.2 ......... Do not compile with use of SSE4.2 instructions.
+ -sse4.2 ............ Compile with use of SSE4.2 instructions.
-no-avx ............ Do not compile with use of AVX instructions.
+ -avx ............... Compile with use of AVX instructions.
-no-avx2 ........... Do not compile with use of AVX2 instructions.
+ -avx2 .............. Compile with use of AVX2 instructions.
-no-ssl ............ Do not compile support for SSL.
+ -ssl ............... Enable run-time SSL support.
-no-openssl ........ Do not compile support for OpenSSL.
+ -openssl ........... Enable run-time OpenSSL support.
-openssl-linked .... Enable linked OpenSSL support.
-no-libproxy ....... Do not compile in libproxy support.
+ -libproxy .......... Compile in libproxy support (for cross compilation
targets).
-no-dbus ........... Do not compile in D-Bus support.
-dbus-linked ....... Compile in D-Bus support and link to libdbus-1.
-dbus-runtime ...... Compile in D-Bus support and load libdbus-1
dynamically.
-no-audio-backend .. Do not compile in the platform audio backend into
Qt Multimedia.
+ -audio-backend ..... Compile in the platform audio backend into Qt
Multimedia.
* -no-wmf-backend .... Do not compile in the windows media foundation backend
into Qt Multimedia.
-wmf-backend ....... Compile in the windows media foundation backend into
Qt Multimedia.
-no-qml-debug ...... Do not build the in-process QML debugging support.
* -qml-debug ......... Build the in-process QML debugging support.
-no-directwrite .... Do not build support for DirectWrite font rendering.
+ -directwrite ....... Build support for DirectWrite font rendering.
* -no-direct2d ....... Do not build the Direct2D platform plugin.
-direct2d .......... Build the Direct2D platform plugin (experimental,
requires Direct2D availability on target systems,
e.g. Windows 7 with Platform Update, Windows 8, etc.)
-no-style-<style> .. Disable <style> entirely.
-qt-style-<style> .. Enable <style> in the Qt Library.
Available styles:
* windows
+ windowsxp
+ windowsvista
* fusion
windowsce
windowsmobile
-no-native-gestures Do not use native gestures on Windows 7.
* -native-gestures ... Use native gestures on Windows 7.
* -no-mp ............. Do not use multiple processors for compiling with MSVC
-mp ................ Use multiple processors for compiling with MSVC (-MP).
-loadconfig <config> Run configure with the parameters from file configure_
<config>.cache.
-saveconfig <config> Run configure and save the parameters in file
configure_<config>.cache.
-redo .............. Run configure with the same parameters as last time.
-v, -verbose ....... Run configure tests with verbose output.
Qt for Windows CE only:
* -no-crt ............ Do not add the C runtime to default deployment rules.
-qt-crt ............ Qt identifies C runtime during project generation.
-crt <path> ........ Specify path to C runtime used for project generation.
-no-cetest ......... Do not compile Windows CE remote test application.
+ -cetest ............ Compile Windows CE remote test application.
-signature <file> .. Use <file> for signing the target project.