习题3-7

1、问题描述:
DNA (Deoxyribonucleic Acid) is the molecule which contains the genetic instructions. It consists of four different nucleotides, namely Adenine, Thymine, Guanine, and Cytosine as shown in Figure 1. If we represent a nucleotide by its initial character, a DNA strand can be regarded as a long string (sequence of characters) consisting of the four characters A, T, G, and C. For example, assume we are given some part of a DNA strand which is composed of the following sequence of nucleotides:

“Thymine-Adenine-Adenine-Cytosine-Thymine-Guanine-Cytosine-Cytosine-Guanine-Adenine-Thymine”

Then we can represent the above DNA strand with the string “TAACTGCCGAT.” The biologist Prof. Ahn found that a gene X commonly exists in the DNA strands of five different kinds of animals, namely dogs, cats, horses, cows, and monkeys. He also discovered that the DNA sequences of the gene X from each animal were very alike. See Figure 2.

DNA sequence of gene X
Cat: GCATATGGCTGTGCA
Dog: GCAAATGGCTGTGCA
Horse: GCTAATGGGTGTCCA
Cow: GCAAATGGCTGTGCA
Monkey: GCAAATCGGTGAGCA

Figure 2. DNA sequences of gene X in five animals.

Prof. Ahn thought that humans might also have the gene X and decided to search for the DNA sequence of X in human DNA. However, before searching, he should define a representative DNA sequence of gene X because its sequences are not exactly the same in the DNA of the five animals. He decided to use the Hamming distance to define the representative sequence. The Hamming distance is the number of different characters at each position from two strings of equal length. For example, assume we are given the two strings AGCAT" andGGAAT.” The Hamming distance of these two strings is 2 because the 1st and the 3rd characters of the two strings are different. Using the Hamming distance, we can define a representative string for a set of multiple strings of equal length. Given a set of strings S = s1,…, sm of length n , the consensus error between a string y of length n and the set S is the sum of the Hamming distances between y and each si in S . If the consensus error between y and S is the minimum among all possible strings y of length n , y is called a consensus string of S . For example, given the three strings AGCAT" AGACT” and GGAAT" the consensus string of the given strings is AGAAT” because the sum of the Hamming distances between AGAAT" and the three strings is 3 which is minimal. (In this case, the consensus string is unique, but in general, there can be more than one consensus string.) We use the consensus string as a representative of the DNA sequence. For the example of Figure 2 above, a consensus string of gene X is GCAAATGGCTGTGCA” and the consensus error is 7.

Input
Your program is to read from standard input. The input consists of T test cases. The number of test cases T is given in the first line of the input. Each test case starts with a line containing two integers m and n which are separated by a single space. The integer m(4 m 50) represents the number of DNA sequences and n(4 n 1000) represents the length of the DNA sequences, respectively. In each of the next m lines, each DNA sequence is given.
Output
Your program is to write to standard output. Print the consensus string in the first line of each case and the consensus error in the second line of each case. If there exists more than one consensus string, print the lexicographically smallest consensus string. The following shows sample input and output for three test cases.
Sample Input
3
5 8
TATGATAC
TAAGCTAC
AAAGATCC
TGAGATAC
TAAGATGT
4 10
ACGTACGTAC
CCGTACGTAG
GCGTACGTAT
TCGTACGTAA
6 10
ATGTTACCAT
AAGTTACGAT
AACAAAGCAA
AAGTTACCTT
AAGTTACCAA
TACTTACCAA

Sample Output
TAAGATAC
7
ACGTACGTAA
6
AAGTTACCAA
12

2.本题思路在于对输入的DNA对进行纵向统计,其中出现次数最多的字母自然就应该是最优解的字符,此外,本题需要按字典序输出,可以在比较大小时按“ATCG”比较,并先入为主的保存即可、

#include <iostream>
#include<cstring> 
using namespace std;
/* run this program using the console pauser or add your own getch, system("pause") or input loop */
char m[100][100];
int maax[2][100];
int main(int argc, char** argv) {
    int t;
    cin>>t;
    int n=t;
    while(t-->=0){
        cin.getline(m[t],sizeof(m[t]));
    }
    int i=0;
    memset(maax,0,sizeof(maax));
    memset(m,0,sizeof(m));
    while(m[0][i]!='\0'){
        int a,c,t,g;
        a=0;c=0;t=0;g=0;
        for(int j=0;j<n;j++){
            switch(m[j][i]){

                case 'A':a+=1;break;
                case 'C':c+=1;break;
                case 'T':t+=1;break;
                case 'G':g+=1;break;
            }

                if(maax[0][j]<a){//保证字典序 
                    maax[0][j]=a;
                    maax[1][j]='A'-'a';
                }
                if(maax[0][j]<t){
                    maax[0][j]=t;
                    maax[1][j]='T'-'a';
                }
                if(maax[0][j]<c){
                    maax[0][j]=c;
                    maax[1][j]='C'-'a';
                }
                if(maax[0][j]<g){
                    maax[0][j]=g;
                    maax[1][j]='G'-'a';
                }

        }
    }
    int sum=0;
    for(int x=0;x<n;x++){
        sum=sum+maax[0][x]; 
        cout<<'a'+maax[1][x];
    }
    cout<<endl;
    cout<<sum;
    return 0;
}
  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
以下是对应的代码实现: 1. 双向链表的实现: DNode.h: ```c++ #ifndef DNODE_H #define DNODE_H template<typename T> struct DNode{ T data; DNode<T> *prior, *next; DNode(const T &d, DNode<T> *p = nullptr, DNode<T> *n = nullptr):data(d), prior(p), next(n){} }; #endif //DNODE_H ``` 双向链表的实现: ```c++ #include <iostream> #include "DNode.h" template<typename T> class DList{ public: DList() : head(new DNode<T>(T())), size(0){} ~DList(){ DNode<T> *p = head, *q; while(p){ q = p->next; delete p; p = q; } } void insert(const T &d); // 右插入 void leftInsert(const T &d); // 左插入 bool remove(const T &d); // 删除 bool empty() const { return size == 0; } void display() const; private: DNode<T> *head; int size; }; template<typename T> void DList<T>::insert(const T &d){ DNode<T> *p = head; while(p->next) p = p->next; DNode<T> *q = new DNode<T>(d, p, nullptr); p->next = q; ++size; } template<typename T> void DList<T>::leftInsert(const T &d){ DNode<T> *p = head->next; DNode<T> *q = new DNode<T>(d, head, p); head->next = q; if(p) p->prior = q; ++size; } template<typename T> bool DList<T>::remove(const T &d){ DNode<T> *p = head->next; while(p && p->data != d) p = p->next; if(!p) return false; p->prior->next = p->next; if(p->next) p->next->prior = p->prior; delete p; --size; return true; } template<typename T> void DList<T>::display() const{ DNode<T> *p = head->next; while(p){ std::cout << p->data << " "; p = p->next; } std::cout << std::endl; } ``` 2. 直接插入排序: ```c++ #include <iostream> #include <vector> template<typename T> void insertSort(std::vector<T> &arr){ int n = arr.size(); for(int i = 1; i < n; ++i){ T tmp = arr[i]; int j = i - 1; while(j >= 0 && arr[j] > tmp){ arr[j+1] = arr[j]; --j; } arr[j+1] = tmp; } } int main(){ std::vector<int> arr{3, 5, 1, 4, 2}; insertSort(arr); for(auto x : arr) std::cout << x << " "; std::cout << std::endl; return 0; } ``` 3. 选择排序: ```c++ #include <iostream> #include <vector> template<typename T> void selectSort(std::vector<T> &arr){ int n = arr.size(); for(int i = 0; i < n-1; ++i){ int k = i; for(int j = i+1; j < n; ++j){ if(arr[j] < arr[k]) k = j; } if(k != i) std::swap(arr[i], arr[k]); } } int main(){ std::vector<int> arr{3, 5, 1, 4, 2}; selectSort(arr); for(auto x : arr) std::cout << x << " "; std::cout << std::endl; return 0; } ``` 4. 起泡排序: ```c++ #include <iostream> #include <vector> template<typename T> void bubbleSort(std::vector<T> &arr){ int n = arr.size(); for(int i = 0; i < n-1; ++i){ bool flag = false; for(int j = 0; j < n-1-i; ++j){ if(arr[j] > arr[j+1]){ std::swap(arr[j], arr[j+1]); flag = true; } } if(!flag) break; } } int main(){ std::vector<int> arr{3, 5, 1, 4, 2}; bubbleSort(arr); for(auto x : arr) std::cout << x << " "; std::cout << std::endl; return 0; } ``` 5. 折半查找: ```c++ #include <iostream> #include <vector> template<typename T> int binarySearch(std::vector<T> &arr, const T &x){ int l = 0, r = arr.size()-1; while(l <= r){ int mid = (l+r)/2; if(arr[mid] == x) return mid; else if(arr[mid] < x) l = mid + 1; else r = mid - 1; } return -1; } int main(){ std::vector<int> arr{1, 2, 3, 4, 5}; int pos = binarySearch(arr, 4); std::cout << pos << std::endl; return 0; } ```

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值