交换机生成树协议STP的配置命令

》打开或关闭STP

Catalyst 3548(Csico IOS系统)

命令格式：spanning-treevlan <vlan>                    //启用STP

                     nospanning-tree vlan <vlan>             // 关闭STP

                    Switch-PHY-3548(config)#spanning-tree vlan 3

                    Switch-PHY-3548(config)#no spanning-tree vlan 3

                    Switch-PHY-3548(config)#

Catalyst 6500(Catalyst OS(CatOS)系统)

命令格式：set spantree enable                        //启用STP

                    set spantree disable                       //关闭STP

                    Switch-PHY-6500>(enable)set spantree enable 3

                    VLAN 3 bridgespanning tree enabled

                    Switch-PHY-6500>(enable)

                    Switch-PHY-6500>(enable)set spantree disable 3

                    VLAN 3 bridgespanning tree disable

                    Switch-PHY-6500>(enable)

》配置根网桥和备份根网桥

Catalyst 3548(Csico IOS系统)

命令格式：spanning-treevlan <vlans> root primary      //设置主ROOT（primaryroot）

    Switch-PHY-3548(config)#spanning-tree vlan 3 root primary

    Switch-PHY-3548(config)#

命令格式：spanning-treevlan <vlans> root secondary    //设置备份ROOT（second root）

    Switch-PHY-3548(config)#spanning-tree vlan 3 root secondary

    Switch-PHY-3548(config)#

 

Catalyst 6500(Catalyst OS(CatOS)系统)

命令格式：setspantree root <vlans>                 //设置主ROOT

                    Switch-PHY-6500>(enable)set spantree root 1,200-204