nginx源代码解读之一

现在开始说nginx的主函数,也就是main函数,该函数位于core目录下的nginx.c

int ngx_cdecl
main(int argc, char *const *argv)
{
    ngx_int_t         i; //ngx_int_t  是intptr_t 该数据类型可以安全的在void*类型的指针和int之间进行转换		 (core文件夹中的config.h当中)
    ngx_log_t        *log;//这是一个结构体,里面有记录登记,日记文件记录,连接信息,处理模块,数据,动作信息 (core文件夹中的ngx_log_t.h当中)
    ngx_cycle_t      *cycle, init_cycle;//由 ngx_cycle_s的重定义
    ngx_core_conf_t  *ccf;//由ngx_core_conf_s的重定义

    ngx_debug_init();

    if (ngx_strerror_init() != NGX_OK) {
        return 1;
    }

    if (ngx_get_options(argc, argv) != NGX_OK) {
        return 1;
    }

    if (ngx_show_version) {
        ngx_write_stderr("nginx version: " NGINX_VER NGX_LINEFEED);

        if (ngx_show_help) {
            ngx_write_stderr(
                "Usage: nginx [-?hvVtq] [-s signal] [-c filename] "
                             "[-p prefix] [-g directives]" NGX_LINEFEED
                             NGX_LINEFEED
                "Options:" NGX_LINEFEED
                "  -?,-h         : this help" NGX_LINEFEED
                "  -v            : show version and exit" NGX_LINEFEED
                "  -V            : show version and configure options then exit"
                                   NGX_LINEFEED
                "  -t            : test configuration and exit" NGX_LINEFEED
                "  -q            : suppress non-error messages "
                                   "during configuration testing" NGX_LINEFEED
                "  -s signal     : send signal to a master process: "
                                   "stop, quit, reopen, reload" NGX_LINEFEED
#ifdef NGX_PREFIX
                "  -p prefix     : set prefix path (default: "
                                   NGX_PREFIX ")" NGX_LINEFEED
#else
                "  -p prefix     : set prefix path (default: NONE)" NGX_LINEFEED
#endif
                "  -c filename   : set configuration file (default: "
                                   NGX_CONF_PATH ")" NGX_LINEFEED
                "  -g directives : set global directives out of configuration "
                                   "file" NGX_LINEFEED NGX_LINEFEED
                );
        }

        if (ngx_show_configure) {
            ngx_write_stderr(
#ifdef NGX_COMPILER
                "built by " NGX_COMPILER NGX_LINEFEED
#endif
#if (NGX_SSL)
#ifdef SSL_CTRL_SET_TLSEXT_HOSTNAME
                "TLS SNI support enabled" NGX_LINEFEED
#else
                "TLS SNI support disabled" NGX_LINEFEED
#endif
#endif
                "configure arguments:" NGX_CONFIGURE NGX_LINEFEED);
        }

        if (!ngx_test_config) {
            return 0;
        }
    }

    /* TODO */ ngx_max_sockets = -1;

    ngx_time_init();

#if (NGX_PCRE)
    ngx_regex_init();
#endif

    ngx_pid = ngx_getpid();

    log = ngx_log_init(ngx_prefix);
    if (log == NULL) {
        return 1;
    }

    /* STUB */
#if (NGX_OPENSSL)
    ngx_ssl_init(log);
#endif

    /*
     * init_cycle->log is required for signal handlers and
     * ngx_process_options()
     */

    ngx_memzero(&init_cycle, sizeof(ngx_cycle_t));
    init_cycle.log = log;
    ngx_cycle = &init_cycle;

    init_cycle.pool = ngx_create_pool(1024, log);
    if (init_cycle.pool == NULL) {
        return 1;
    }

    if (ngx_save_argv(&init_cycle, argc, argv) != NGX_OK) {
        return 1;
    }

    if (ngx_process_options(&init_cycle) != NGX_OK) {
        return 1;
    }

    if (ngx_os_init(log) != NGX_OK) {
        return 1;
    }

    /*
     * ngx_crc32_table_init() requires ngx_cacheline_size set in ngx_os_init()
     */

    if (ngx_crc32_table_init() != NGX_OK) {
        return 1;
    }

    if (ngx_add_inherited_sockets(&init_cycle) != NGX_OK) {
        return 1;
    }

    ngx_max_module = 0;
    for (i = 0; ngx_modules[i]; i++) {
        ngx_modules[i]->index = ngx_max_module++;
    }

    cycle = ngx_init_cycle(&init_cycle);
    if (cycle == NULL) {
        if (ngx_test_config) {
            ngx_log_stderr(0, "configuration file %s test failed",
                           init_cycle.conf_file.data);
        }

        return 1;
    }

    if (ngx_test_config) {
        if (!ngx_quiet_mode) {
            ngx_log_stderr(0, "configuration file %s test is successful",
                           cycle->conf_file.data);
        }

        return 0;
    }

    if (ngx_signal) {
        return ngx_signal_process(cycle, ngx_signal);
    }

    ngx_os_status(cycle->log);

    ngx_cycle = cycle;

    ccf = (ngx_core_conf_t *) ngx_get_conf(cycle->conf_ctx, ngx_core_module);

    if (ccf->master && ngx_process == NGX_PROCESS_SINGLE) {
        ngx_process = NGX_PROCESS_MASTER;
    }

#if !(NGX_WIN32)

    if (ngx_init_signals(cycle->log) != NGX_OK) {
        return 1;
    }

    if (!ngx_inherited && ccf->daemon) {
        if (ngx_daemon(cycle->log) != NGX_OK) {
            return 1;
        }

        ngx_daemonized = 1;
    }

    if (ngx_inherited) {
        ngx_daemonized = 1;
    }

#endif

    if (ngx_create_pidfile(&ccf->pid, cycle->log) != NGX_OK) {
        return 1;
    }

    if (cycle->log->file->fd != ngx_stderr) {

        if (ngx_set_stderr(cycle->log->file->fd) == NGX_FILE_ERROR) {
            ngx_log_error(NGX_LOG_EMERG, cycle->log, ngx_errno,
                          ngx_set_stderr_n " failed");
            return 1;
        }
    }

    if (log->file->fd != ngx_stderr) {
        if (ngx_close_file(log->file->fd) == NGX_FILE_ERROR) {
            ngx_log_error(NGX_LOG_ALERT, cycle->log, ngx_errno,
                          ngx_close_file_n " built-in log failed");
        }
    }

    ngx_use_stderr = 0;

    if (ngx_process == NGX_PROCESS_SINGLE) {
        ngx_single_process_cycle(cycle);

    } else {
        ngx_master_process_cycle(cycle);
    }

    return 0;
}


那么我们就一步一步的,看看这个函数做了什么

现在看看,在MAIN函数中的第一个函数ngx_debug_init,该函数在文件当中os目录下的unix下的nginx_dariwn_init.c文件当中!该函数利用环境变量“MallocScribble”,如果设置了该环境变量,就将ngx_debug_malloc置成1

void
ngx_debug_init()
{
#if (NGX_DEBUG_MALLOC)

    /*
     * MacOSX 10.6, 10.7:  MallocScribble fills freed memory with 0x55
     *                     and fills allocated memory with 0xAA.
     * MacOSX 10.4, 10.5:  MallocScribble fills freed memory with 0x55,
     *                     MallocPreScribble fills allocated memory with 0xAA.
     * MacOSX 10.3:        MallocScribble fills freed memory with 0x55,
     *                     and no way to fill allocated memory.
     */

    setenv("MallocScribble", "1", 0);

    ngx_debug_malloc = 1;

#else

    if (getenv("MallocScribble")) {
        ngx_debug_malloc = 1;
    }

#endif
}

也就是说,主要作用是将程序地址空间中的内存,利用0x55进行填充

第二个函数呢就是ngx_strerror_init,这个函数是在os文件夹下的unix下的ngx_errno.c文件,该函数的源码如下

ngx_int_t
ngx_strerror_init(void)
{
    char       *msg;
    u_char     *p;
    size_t      len;
    ngx_err_t   err;

    /*
     * ngx_strerror() is not ready to work at this stage, therefore,
     * malloc() is used and possible errors are logged using strerror().
     */

    len = NGX_SYS_NERR * sizeof(ngx_str_t);

    ngx_sys_errlist = malloc(len);
    if (ngx_sys_errlist == NULL) {
        goto failed;
    }

    for (err = 0; err < NGX_SYS_NERR; err++) {
        msg = strerror(err);
        len = ngx_strlen(msg);

        p = malloc(len);
        if (p == NULL) {
            goto failed;
        }

        ngx_memcpy(p, msg, len);
        ngx_sys_errlist[err].len = len;
        ngx_sys_errlist[err].data = p;
    }

    return NGX_OK;

failed:

    err = errno;
    ngx_log_stderr(0, "malloc(%uz) failed (%d: %s)", len, err, strerror(err));

    return NGX_ERROR;
}
首先看看ngx_str_t的数据类型的定义,该定义是在core文件夹下的ngx_string.h文当中定义的

typedef struct {
    size_t      len;
    u_char     *data;
} ngx_str_t;
该函数的作用就是讲我们需要的所有的系统中的错误信息保存起来,利用错误代码本身作为索引,索引所在结构体中的data即为错误信息,我们需要的错误信息的错误代码一直到NGX_SYS_NERR,他的默认值,我没有找到,如果将该结构体填充好了即返回NGX_OK,否则返回NGX_ERROR.

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

世纪殇

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值