wewqe

script.c
script_runreason(const struct interface *ifp, const char *reason)
elen = (size_t)make_env(ifp, reason, &env);
pid = exec_script(ifp->ctx, argv, env);

make_env(const struct interface *ifp, const char *reason, char ***argv)


exec_script(const struct dhcpcd_ctx *ctx, char *const *argv, char *const *env)
posix_spawn(&pid, argv[0], NULL, &attr, argv, env);

posix_spawn.c
intposix_spawn(pid_t *pid, const char *path,const posix_spawn_file_actions_t *file_actions,const posix_spawnattr_t *attrp,char *const argv[], char *const envp[])
execve(path, argv, envp);










dhcpcd.c
eloop_event_add(ctx.eloop, ctx.link_fd, dhcpcd_handlelink, &ctx);


dhcpcd.c
static void dhcpcd_handlelink(void *arg)
{
struct dhcpcd_ctx *ctx;

ctx = arg;
if (if_handlelink(ctx) == -1) {
logger(ctx, LOG_ERR, "if_handlelink: %m");
eloop_event_delete(ctx->eloop, ctx->link_fd);
close(ctx->link_fd);
ctx->link_fd = -1;
}
}


if-linux.c
if_handlelink(struct dhcpcd_ctx *ctx)
{

return get_netlink(ctx, ctx->iov, NULL,
ctx->link_fd, MSG_DONTWAIT, &link_netlink);
}

if-linux.c
get_netlink(struct dhcpcd_ctx *ctx, struct iovec *iov,struct interface *ifp, int fd, int flags,int (*callback)(struct dhcpcd_ctx *, struct interface *, struct nlmsghdr *))
if (callback && (r = callback(ctx, ifp, nlm)) != 0)
break;


dhcpcd.c
949run_preinit(struct interface *ifp)

 

netlink
rtnetlink.h
struct ifinfomsg {
unsigned char ifi_family;
unsigned char __ifi_pad;
unsigned short ifi_type; /* ARPHRD_* */
int ifi_index; /* Link index */
unsigned ifi_flags; /* IFF_* flags */
unsigned ifi_change; /* IFF_* change mask */
};

netlink.h
struct nlmsghdr {
__u32 nlmsg_len; /* Length of message including header */
__u16 nlmsg_type; /* Message content */
__u16 nlmsg_flags; /* Additional flags */
__u32 nlmsg_seq; /* Sequence number */
__u32 nlmsg_pid; /* Sending process port ID */
};

#define NLMSG_ALIGNTO 4U
#define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
#define NLMSG_HDRLEN ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
#define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
#define NLMSG_SPACE(len) NLMSG_ALIGN(NLMSG_LENGTH(len))
#define NLMSG_DATA(nlh) ((void*)(((char*)nlh) + NLMSG_LENGTH(0)))
#define NLMSG_NEXT(nlh,len) ((len) -= NLMSG_ALIGN((nlh)->nlmsg_len), \
(struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
(nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
(nlh)->nlmsg_len <= (len))
#define NLMSG_PAYLOAD(nlh,len) ((nlh)->nlmsg_len - NLMSG_SPACE((len)))

#define NLMSG_NOOP 0x1 /* Nothing. */
#define NLMSG_ERROR 0x2 /* Error */
#define NLMSG_DONE 0x3 /* End of a dump */
#define NLMSG_OVERRUN 0x4 /* Data lost */

#define NLMSG_MIN_TYPE 0x10 /* < 0x10: reserved control messages */

if.h
#define IFF_UP 0x1 /* interface is up */
#define IFF_BROADCAST 0x2 /* broadcast address valid */
#define IFF_DEBUG 0x4 /* turn on debugging */
#define IFF_LOOPBACK 0x8 /* is a loopback net */
#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */
#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */
#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */
#define IFF_NOARP 0x80 /* no ARP protocol */
#define IFF_PROMISC 0x100 /* receive all packets */
#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/

#define IFF_MASTER 0x400 /* master of a load balancer */
#define IFF_SLAVE 0x800 /* slave of a load balancer */

#define IFF_MULTICAST 0x1000 /* Supports multicast */

 

 

./configure CC=/opt_gccarm/1295_toolchain/bin/aarch64-openwrt-linux-gcc --prefix=/home/jack/pratice/dhcpcd/dhcpcd-6.11.5/_install/

转载于:https://www.cnblogs.com/Malphite/p/8378776.html

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
代码下载:完整代码,可直接运行 ;运行版本:2022a或2019b或2014a;若运行有问题,可私信博主; **仿真咨询 1 各类智能优化算法改进及应用** 生产调度、经济调度、装配线调度、充电优化、车间调度、发车优化、水库调度、三维装箱、物流选址、货位优化、公交排班优化、充电桩布局优化、车间布局优化、集装箱船配载优化、水泵组合优化、解医疗资源分配优化、设施布局优化、可视域基站和无人机选址优化 **2 机器学习和深度学习方面** 卷积神经网络(CNN)、LSTM、支持向量机(SVM)、最小二乘支持向量机(LSSVM)、极限学习机(ELM)、核极限学习机(KELM)、BP、RBF、宽度学习、DBN、RF、RBF、DELM、XGBOOST、TCN实现风电预测、光伏预测、电池寿命预测、辐射源识别、交通流预测、负荷预测、股价预测、PM2.5浓度预测、电池健康状态预测、水体光学参数反演、NLOS信号识别、地铁停车精准预测、变压器故障诊断 **3 图像处理方面** 图像识别、图像分割、图像检测、图像隐藏、图像配准、图像拼接、图像融合、图像增强、图像压缩感知 **4 路径规划方面** 旅行商问题(TSP)、车辆路径问题(VRP、MVRP、CVRP、VRPTW等)、无人机三维路径规划、无人机协同、无人机编队、机器人路径规划、栅格地图路径规划、多式联运运输问题、车辆协同无人机路径规划、天线线性阵列分布优化、车间布局优化 **5 无人机应用方面** 无人机路径规划、无人机控制、无人机编队、无人机协同、无人机任务分配 **6 无线传感器定位及布局方面** 传感器部署优化、通信协议优化、路由优化、目标定位优化、Dv-Hop定位优化、Leach协议优化、WSN覆盖优化、组播优化、RSSI定位优化 **7 信号处理方面** 信号识别、信号加密、信号去噪、信号增强、雷达信号处理、信号水印嵌入提取、肌电信号、脑电信号、信号配时优化 **8 电力系统方面** 微电网优化、无功优化、配电网重构、储能配置 **9 元胞自动机方面** 交通流 人群疏散 病毒扩散 晶体生长 **10 雷达方面** 卡尔曼滤波跟踪、航迹关联、航迹融合

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值