meego Image Creation

Image Creation

Contents

[hide ]

Overview

This is the main Image Creator developer's guide. For a more simplistic, step-by-step document, go to: Image Creation For Beginners .

The tool used to create MeeGo images is something called "MIC2" (for distinguishing from obsolete MIC - Moblin Image Creator). MIC stands for MeeGo Image Creator. It is composed of a series of tools to create images, convert images and do some development work on MeeGo. MIC2 is based primarily on Fedora livecd-tools and appliance-tools.

With MIC2 tools, users can create different types of images for different purposes, including live CD images, live USB images, raw images for KVM, VMDK images for Vmware, vdi images for VirtualBox, loop images for IVI platforms, NAND images for Moorestown platforms, ubi images for N900, fs image for MeeGo developers. Also, users can use MIC2 tools to manipulate images like transforming an image from a virtual machine to a live image, and providing a chroot environment based on an existing live image. With these features, developers can do development work on a host virtual machine running MeeGo or a Meego chroot environment, and transfer the resulting new live image to a target device for final debug/verification.

This document discusses only features, usage guide, and known issues.

Features

MIC2 offers these major tools:

  • mic-image-creator: create images.
  • mic-image-convertor: convert a raw/vmdk/vdi/live image into a live image.
  • mic-chroot: provide a MeeGo environment from a live/loop image for development, it also can ranslate that chroot file system into a live image.
  • mic-image-writer: write a MeeGo image to a USB disk. This is a safe alternative to dd.

The following support is provided:

  • Supports mainstream Linux distros. MIC2 has been thoroughly tested on these distributions:
    • Meego
    • Fedora (Fedora 10 and above)
    • Opensuse (> OpenSUSE 11.1)
    • and Ubuntu > 9.04
  • Supports various types of images: livecd, liveusb, loop, raw, vmdk, nandmrst, vdi, fs, ubi
  • Supports image coversion from virtual machine/live images to live images.
  • Uses kickstart (.ks) files for image creation. Through this, users can specify which software repositories to use, which packages to install and basic system configuration directives. Please refer to http://fedoraproject.org/wiki/Anaconda/Kickstart for more information about kickstart configuration files.

Usage

Requirements

To be able to use MIC2, the following packages must be available on your system. (Most of the packages are installed by default, depending on the distribution.):

  • yum
  • rpm
  • kpartx
  • parted
  • syslinux
  • isomd5sum
  • kvm
  • zlib-devel(for compiling)
  • python-devel(for installation)

You should load these modules as well, if not loaded automatically by the kernel:

  • squashfs
  • squashfs-tools
  • dm_snapshot
  • loop

Specific packages for Fedora:

  • pykickstart
  • device-mapper

Specific packages for Ubuntu 8.10:

  • python-celementtree
  • python-elementtree
  • dmsetup

 

Installation

We currently build MIC2 binary rpms/debs for many popular Linux distributions, including Fedora 11, Fedora 12, Ubuntu 9.04, Ubuntu 9.10, OpenSUSE 11.1, OpenSUSE 11.2 and Debian 5.0. Please go to http://repo.meego.com/tools/repos/ to get repository URL corresponding to your Linux distribution then add it into your repo or package source for installation and update later. If your distribution isn't in support list, please install MIC2 from git source.

From Binary Packages

  • Installation Steps For Fedora 11 and Fedora 12

1. Add MIC2 repo

For Fedora 11, save Meego-devel-tools-f11.repo as /etc/yum.repos.d/meego-devel-tools-f11.repo

For Fedora 12, save Meego-devel-tools-f12.repo as /etc/yum.repos.d/meego-devel-tools-f12.repo

2. sudo yum install mic2 --nogpgcheck

  • Update Steps For Fedora 11 and Fedora 12

You can use the below command to get the latest mic2 package.

sudo yum update mic2 --nogpgcheck

  • Installation Steps For Ubuntu 9.04, Ubuntu 9.10 and Debian 5.0

1. Add package source

For Ubuntu 9.04, add the below line to /etc/apt/sources.list

deb http://repo.meego.com/tools/repos/ubuntu/9.04/ /

For Ubuntu 9.10, add the below line to /etc/apt/sources.list

deb http://repo.meego.com/tools/repos/ubuntu/9.10/ /

For Debian 5.0, add the below line to /etc/apt/sources.list

deb http://repo.meego.com/tools/repos/debian/5.0/ /

2. sudo apt-get update

You should see the following error: W: GPG error: http://repo.meego.com Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 0BC7BEC479FC1F8A

To add the repository public key use the following command: gpg --export --armor 0BC7BEC479FC1F8A | sudo apt-key add -

3. sudo apt-get install syslinux=3.85

4. sudo apt-get install mic2

  • Update Steps For Ubuntu 9.04, Ubuntu 9.10 and Debian 5.0

1. sudo apt-get update

2. sudo apt-get install mic2

  • Installation Steps For OpenSUSE 11.1 and OpenSUSE 11.2

1. Add repos

For OpenSUSE 11.1:

sudo zypper addrepo http://repo.meego.com/tools/repos/opensuse/11.1/ meego-tools

For OpenSUSE 11.2:

sudo zypper addrepo http://repo.meego.com/tools/repos/opensuse/11.2/ meego-tools

2. sudo zypper install mic2

  • Update Steps For OpenSUSE 11.1 and OpenSUSE 11.2
sudo zypper update mic2

From Stable Git Source Releases

You can get the latest stable release of MIC2 from the tag section in http://meego.gitorious.org/meego-developer-tools/image-creator . Click on the "Source tree" link on the top of the screen. There will be a list of tags on the right hand side.

You should follow the below steps to install it:

git clone git://gitorious.org/meego-developer-tools/image-creator.git

cd image-creator

git checkout 0.17 #check Gitorious for the most recent tag

make

sudo make install

 

From Development Git Tree

Note: MIC2 GIT tree has latest-and-greatest source, so stability is not guaranteed. If you run into errors, please use a 'Stable Release' instead before filing a bug.

You need to follow the below steps to git clone MIC2:

git clone git://gitorious.org/meego-developer-tools/image-creator.git

Build and install:

cd image-creator

make clean

make

sudo make install

You should add the repo for mic2 then run

sudo ./tools/mic-check-alldeps

to check/install all the depended packages, otherwise mic2 can't work normally.

Running mic-image-creator

Configuration of images is based on kickstart, the format used for unattended installation in Fedora and Redhat.

Super user privileges are needed. The tool is more or less self-documented, use the --help option to see options.

sudo mic-image-creator --help

Creating Supported Image Types

KickStart (.ks) configuration files are passed to MIC2 to create tailored images. KickStart files specify what repos to pull from, what packages to include, what post-scripts to run and what type of images to create.

To obtain the official Meego .ks files, go here: TO-DO-LINK

Create Livecd Image

sudo mic-image-creator --config=default.ks --format=livecd --cache=mycache

This tells image-creator to use the kickstart file default.ks to obtain info about which packages to download and include in the image, and --cache is the directory on your local machine which will host a cache of these packages. The cache is very useful if you are remote to the server and reduces the amount of downloaded packages next time you create an image. Next time the command is run, this cache will simply be 'updated' if there are changes, rather than re-downloading from the repositories again.

The output of this command will be a file named meego-1.0-default-XX.iso created. This ISO image is a hybrid image and can be either written to a disk device or burned onto a cd.

To burn it onto a USB stick, just run the following command, assuming the USB stick is /dev/sdb in your system:

sudo mic-image-writer meego-1.0-default-XX.iso

Create Moorestown NAND Image

Please refer to the section dedicated to this topic below.

Create Liveusb Image

sudo mic-image-creator --config=default.ks --format=liveusb --cache=mycache

A file named meego-1.0-default-XX.usbimg will be created. To burn it onto a USB stick, run the following command, assuming the USB stick is /dev/sdb in your system:

sudo mic-image-writer meego-1.0-default-XX.usbimg

This image has a FAT file system and can be mounted easily on Windows and other OSes.

Create Liveusb Image Interactively

sudo mic-image-creator --config=default.ks --format=liveusb --interactive --cache=mycache

It directly creates a MeeGo live usb stick.

Liveusb image can be created in two different ways, interactive and non-interactive (default). When running MIC2 in a non-interactive mode, MIC2 creates a USB images file that can be copied directly into a USB stick. The non-interactive mode can be used for daily build or automated testing. The interactive mode will write the images onto a USB disk, it will detect if a USB stick is available and detects and verifies a partition is available. If two or more USB devices are present, you will be asked to select the target device. This way won't destroy existing content of USB stick unless it founds no appropriate partition, end user should use it to create live USB.

Create Loop Image

This is the simplest image format available. Such images can be loop mounted and chrooted into, for example, to build applications or for debugging purposes.

sudo mic-image-creator --config=default.ks --format=loop --cache=mycache

A file named meego-1.0-default-XX.img is created. You can use below to mount it and chroot into it.

sudo mount -o loop meego-1.0-default-XX.img /mnt

sudo chroot /mnt su -

Create KVM Image

Can be used with QEMU or other VMM applications to launch MeeGo as a virtualized instance.

sudo mic-image-creator --config=default.ks --format=raw --cache=mycache

A file named meego-1.0-default-XX folder with a meego-1.0-default-XX-sda.raw image is created. For optimal results, use this feature in a machine with VT support and enable it in the BIOS.

If you use Fedora or openSUSE, run the following command to launch the image into MeeGo KVM virtual machine:

sudo qemu-kvm -m 512 -boot c -hda meego-1.0-default-XX-sda.raw -std-vga

If you use Ubuntu, run the following command launch image:

sudo kvm -m 512 -boot c -hda meego-1.0-default-XX-sda.raw

Create VMDK Image

VMDK images can be loaded into Vmware or Vmware player. MIC2 also generates a VMX file that has image configuration and can be used to launch the image in Vmware by just clicking the file. If you have vmplayer, it should open automatically.

sudo mic-image-creator --config=default.ks --format=vmdk --cache=mycache

A file named meego-1.0-default-XX folder with both meego-1.0-default-XX-sda.vmdk image and meego-1.0-default-XX-sda.vmx is created. Just run vmware or vmware player, and select the generated vmx file.

 

KickStart Files (configuration files used for image creation)

KickStart (.ks) configuration files are passed to MIC2 to create tailored images. KickStart files specify what repos to pull from, what packages to include, what post-scripts to run and what type of images to create.

For more details about the kickstart format, see http://fedoraproject.org/wiki/Anaconda/Kickstart .

Note that not all KickStart directives and options are supported for creating Meego images. MIC2 also adds some specific directives and options. More explained below.

Official Meego .ks files

The official Meego .ks files are here:

You can download and use them as a base for the Meego images you create. Modify these .ks files as you wish to create tailored images.

Modifying your .ks

Developers may want to modify the .ks files to create their own custom images. Here are the main options and sections within the .ks file.

You can also find in-depth .ks option information here: http://fedoraproject.org/wiki/Anaconda/Kickstart#Chapter_2._Kickstart_Options

Partition, Setup and Bootloader options

Example

lang en_US.UTF-8

keyboard us

timezone --utc America/New_York

auth --useshadow --enablemd5

part / --size 1500 --ondisk sda --fstype=ext3

rootpw meego

xconfig --startxonboot

bootloader --timeout=0 --append="quiet"

desktop --autologinuser=meego --defaultdesktop=xfce

user --name meego --groups audio,video --password meego

These are mostly self-explanatory and set up important things such as partition size, filesystem type, kernel paramters, etc. You can change these depending on what your needs are.

Repos

This is where you can specify the yum repositories that you want MIC2 to search and pull your packages from to make up your image. You can add official Meego repos, other remote repos, or your own local repos on your dev machine.

Example

# This is a comment



# My first repo

repo --name=trunk --baseurl=http://mytrunk.myrepo.com



# My second repo

#repo --name=<repo-name-2> --baseurl=< url | local-repo-dir >

NOTE: --name of the repo can be any unique alphanumeric name you give your repo, it can be anything. Just make sure you don't use the same name twice for any of the listed repos, remember they have to be unique.

To create a repo you can point to on your local developer machine, you can run the following command:

createrepo -d <local-dir>

Where 'local-dir' is a local directory on your machine that contains the rpms you want include in your local directory.

Adding Packages and Package Groups

Example

%packages



# Example adding pkg groups



@Core

@X for Netbooks

@Base

@Development Tools

@<my-PkgGroup1>

@<my-PkgGroup2>



# Example adding individual pkgs



kernel-netbook

xorg-x11-server-Xorg-setuid

carrick

xorg-x11-drv-evtouch

<my-pkg-1>

<my-pkg-2>

%end



This specifies exactly what packages will be included in your image. Package groups can be specified with a "@" preceding it, as you can see from the examples above. Package groups are defined in the 'repodata' section of a repo, under a 'comps*.xml' file. Defined therein are package group names, and what packages are included in each package group. The Meego package groups are standard, and cannot be changed. You can, however, define your own package groups in your own non-Meego repos if you are using those.

Please see here for more info on defining package groups in repositories: TO-DO-LINK

You can also add individual package names to be included in the image as you can see from the second part in the above example.

Important Note about how MIC2 picks a package when different versions are available

A common problem is that, let's say, a packageA has more than one version residing in a repo(s) that your .ks is pointing to.

How will the MIC2 know which one to pick?

Example

There exists in the repo(s) these different versions of PackageA:

PackageA-1.0

PackageA-2.0

PackageA-3.0


MIC2 will pick the PackageA with the highest version number (PackageA-3.0 in this case).

There is one way to get around that, and that is to set the 'Epoch' version within a package .spec file.

Example (works in both .spec and .yaml file)



Name: <name>

Summary: <summary>

Epoch: 1

Version: <version>



MIC2 will first look to compare the 'Epoch' version of the packages. All Meego official packages do not include an 'Epoch' version, so if you set the 'Epoch' number within your .spec file to any positive integer, no matter if your package version is smaller, MIC2 will choose your package.

So back to our example.

Example

PackageA-1.0 (Epoch not set)

PackageA-2.0 (Epoch = 1)

PackageA-3.0 (Epoch not set)

MIC2 will choose PackageA-2.0 in this case. And it follow that:

Example

PackageA-1.0 (Epoch=100)

PackageA-2.0 (Epoch = 1)

PackageA-3.0 (Epoch not set)

MIC2 will choose PackageA-1.0.

Remember that Meego packages will not have 'Epoch' set, so chances are that if you set 'Epoch' in your own package to any positive integer, it will be the one MIC2 chooses to pull down and include in an image.

Removing Packages

If you would like to make sure that a pkg is _not_ included, you can specify that with a '-' preceding the package name.

Example

%packages



# Example pkg groups



@Core



# Example adding individual pkgs



kernel-netbook



# Example removing individual pkgs



-carrick

-package-xyz



%end

with the above example, packages 'carrick' and 'package-xyz' will _not_ be included in the image.

Note: all packages that depend on the package you want to remove should also be removed, or else MIC2 will ignore your request to remove that package from an image. E.g. if 'carrick' depends on 'package-xyz', and you specified only to remove 'package-xyz', and keep carrick, MIC2 will ignore the request to remove package-xyz (since carrick depends on it), and it includes both of these pgks in the image.

Post scripts

You can also specify post-scripts to be run after the image is installed.

Example

%post



# Example - saving some space

rm -f /boot/initrd*

rm -f /core*





# Example - Install working xorg.conf

if [ -f /usr/share/my.conf ]; then

cp /usr/share/my.conf /etc/X11/xorg.conf

fi



# Example - Tell alsa the correct audio card to use for your platform

echo -e "options snd-hda-intel index=0/noptions snd-timbi2s index=1" > /etc/modp

robe.d/alsa.conf





%end

Proxy settings for the repos in .ks

An option you might find useful if you're behind a firewall is the --proxy flag for the "repo" definition. You can specify it in the .ks as follows:

 repo --name=meego --baseurl=http://repo.meego.com/trunk/repo/ia32/os/

--proxy=http://proxyhost:proxyport/
--proxyuser=proxyusername

--proxypaswd=proxyuserpassword

If you are behind a firewall, you don't need to set proxyuser and proxypasswd, like:

 repo --name=meego  --baseurl=http://repo.meego.com/trunk/repo/ia32/os/

--proxy=http://proxyhost:proxyport


Note: You can also insert this in your sudoers config:

 

$ sudo visudo



Add: Defaults env_keep += " no_proxy http_proxy ........."

so sudo will adhere to the no_proxy and proxy settings.

MIC2 Configuration file

MIC2 options can be specified in a global configuration file (/etc/mic2/mic2.conf ) and local configuration file ($HOME/.mic2.conf ) where you can specify

  • Repository configuration
  • proxy settings
  • cache directories and
  • other variables

that you normally would have to re-type in your command-line.

The two configuration files have the same format, /etc/mic2/mic2.conf is global, no matter whoever is running MIC2, this configuration file will be read first, $HOME/.mic2.conf is just valid for current user, every user can have their own settings. The final configuration is a combination of two configuration files, options in $HOME/.mic2.conf will override those from /etc/mic2/mic2.conf . Options from command line have the highest priority. If an option is specified on the command line, the same option in both configuration files, global and local will be ignored.

Below is an example you can cut-and-paste, and reuse for your needs:

[main]

cachedir=/home/user1/mycache

tmpdir=/home/user1/mystorage/tmp

outdir=/home/user1/mystorage

proxy=http://my.proxy.com:911/

no_proxy=localhost,127.0.0.0/8,.mysite.com,172.16.0.0/16

cachedir = directory where the cached repo(s) will reside. With this variable set, you do not need to pass the --cache flag in the command-line.

tmpdir = temporary directory used by MIC2 when creating images. With this variable set, you do not need to pass the --tmpdir flag in the command-line.

outdir = where your images will reside once they are created. With this variable set, you do not need to pass the --outdir flag in the command-line.

proxy = specify your proxy if you're behind a behind a firewall.

no_proxy = specify what domains should not sure the proxy setting.

image_format = specify image format.

default_ks = specify a default kickstart file, there are several kickstart files provided in repository http://repo.meego.com/MeeGo/devel/trunk/repo/ia32/os/

Note: When specifying proxy and no_proxy, you do not need to use the --proxy flag in your .ks files when referring to repos.


In configuration files, you also can specify one or multiple repositories, for example:

[trunk]

name=trunk

baseurl=http://repo.meego.com/MeeGo/devel/trunk/repo/ia32/os/

enabled=1

Once there is this reposiroty info in your configuration files, and both image_format and default_ks are set, you can just run "sudo mic-image-creator" to create a image, there isn't any extra argument needed.

Use Bootstrap

MIC2 highly depends on yum and librpm, but different Linux distributions used diffrent yum and librpm versions, so MIC2 has some compatibility issues on OpenSUSE, Ubuntu and Debian, bootstrap is just for fixing these compatibility issues.

bootstrap is a minimal MeeGo file system, MIC2 can run very smoothly on it using chroot mode. You can use the below command to create a bootstrap:

sudo mic-create-bootstrap -n trunk -k /your/repo/cache/path -r http://repo.meego.com/MeeGo/devel/trunk/repo/ia32/os/ -o /your/final/bootstrap

-n is used to specify repository name, if you have its cache before, it can reduce runtime dramatically to use it with -k option, -k is used to specify your repository cache dir, -r is used to specify MeeGo main repository.

Once you created your bootstrap, you can use this bootstrap to run MIC2 as follows

sudo mic-image-creator --bootstrap=/your/final/bootstrap --format=livecd --config=default.ks --cache=/your/repo/cache/path


Alternatively, you can create and use bootstrap in one mic-image-creator run as follows

sudo mic-image-creator --build-bootstrap --bootstrap=/your/final/bootstrap --format=livecd --config=default.ks --cache=/your/repo/cache/path

Running mic-image-writer

mic-image-writer writes a Meego image to a USB disk. It is a safe alternative to dd. dd is really a very dangerous tool.

mic-image-writer can run in both console mode and GUI mode. It can decide which mode to run, according to current system environment. You can also use a given option to force it to run in some other mode. Run 'mic-image-writer --help' to get usage information:

Usage: mic-image-writer [options] [image file]



Options:

-h, --help Show this help message and exit

-c, --console Run in console mode

-g, --gui Run in GUI mod

Here is a run example in console mode:

$ sudo mic-image-writer meego-xxx.img

Available usb disk:

[1] /dev/sdc: SanDisk USB Flash Drive

[2] /dev/sdb: SanDisk U3 Cruzer Micro

Please choice [1..2] ? 2

Source: /myhome/meego-xxx.img

Target: /dev/sdb

Image size: 559 MB

Estimated time: 55 seconds

Elapsed time: 64, progress: 100% 8944+0 records in

8944+0 records out

586153984 bytes (586 MB) copied, 63.0486 s, 9.3 MB/s

mic-image-writer can estimate how long it will take to write the given image to your USB disk and reports current writing progress. It automatically unmounts your USB disk, if it is mounted. If your USB can't be unmounted, it will terminate.

If you love UI mode, you can run it in X enviroment. The command with the added -g flag:

sudo mic-image-writer -g meego-xxx.img

Image name is optional.

Running mic-image-convertor

It's very easy to use:

sudo mic-image-convertor --source-image=InputImage --target-format=Targegformat



sudo mic-image-convertor -I InputImage -T Targegformat

For example, to translate a KVM raw image to livecd image, just type:

sudo mic-image-convertor --source-image=meego-core-200902200545/meego-core-200902200545-sda.raw --target-format=livecd

A new livecd image of meego-converted-from-raw-200902201804.iso is generated. The tool can detect the type of input image, either raw or vmdk.

This tool is very useful. For example, the developer can launch a virtual machine running MeeGo v2 and make whatever changes on the virtual system like yum install/remove a package, scp a source tarball to VM and build and try, and etc. Then with a simple "sync" or shutdown of VM, the VM image now contains his changes. With this tool, the VM image can be transformed to a live image and burned to a USB flash disk. Now developers can have final verifications in a target device, with changes in the live system.

Running mic-chroot

There are two major usage models for mic-chroot for developers.

chroot directly into the image to use it as a development environment, then optionally create a new image based off of your changes

sudo mic-chroot  -c livecd meego-core-200903131337.iso

The above command would present a chroot, using the livecd image, to developers with some bind mounts like /proc /sys /dev/pts and /parentroot. With those bind mounts, developers now can easily exchange files in chroot env with host /parentroot, and conduct yum install, yum remove and any other network related operations. After done and typing "exit", a new live ISO image is created from the chroot env with the changes developers made.

Unpack and modify the image's filesystem (which you can save), and create a new image based off of your changes

Sometimes developers want to keep the chroot env so that they can do multiple changes in that root file system at different times. So they want to execute following:

sudo mic-chroot -s my-chroot-fs --unpack-only  meego-core-200903131337.iso --bind-mounts=/proc:/proc;/:/parentroot;/sys:/sys;/dev/pts:/dev/pts

The above creates a folder 'my-chroot-fs' in the current directory, using the chroot env from the livecd image. Of course if developers forget add the --bind-mounts options, they must manually do some bind mounts themselves like for /proc /sys /dev/pts to use network and run many commands. Don't forget copying /etc/reslov.conf into my-chroot-fs to use DNS. Now at any time developers think is time to create an image from the chroot env, just execute following to create a livecd image

sudo mic-chroot -c livecd --convert-only my-chroot-fs/

Enabling Autoinstallation

You need to copy a kickstart file into /root/mic2-ks.cfg which is used for automated installation of the image. To activate autoinstall mode, boot with autoinst on the command line or add --menus=autoinst to the bootloader directive in the kickstart file you use to create the image.

Known issues

  • MIC2 is not compatible with Ubuntu 8.04 (Yum package compatibility)
  • MIC2 has some issues on Debian, please refer to MIC on Debian to get installation instructions

Troubleshooting

You can file a bug on http://bugzilla.meego.com/enter_bug.cgi?product=Development%20Tools (Note: you should select MIC for component) if you run into any MIC2-related issue, bugzilla can track your issue faster and more efficiently.

libgcc related issues

libgcc_s.so.1 must be installed for pthread_cancel to work"



"Error: failed to create image : '/sbin/mksquashfs /var/tmp/imgcreate-FKCSsk/iso-u8xCPh/LiveOS/osmin /var/tmp/imgcreate-FKCSsk/iso-u8xCPh/LiveOS/osmin.img' exited with error (-6)

This error occurs when MIC2 is unable to find the proper version of libgcc. This usually happens on x84_64 systems - MIC2 is looking for the 32 bit version of libgcc, but only the 64 bit version is installed. Installing the 32 bit version of libgcc should resolve this.

General squashfs issues

"Error: failed to create image : '/sbin/mksquashfs /var/tmp/imgcreate-FKCSsk/iso-u8xCPh/LiveOS/osmin /var/tmp/imgcreate-FKCSsk/iso-u8xCPh/LiveOS/osmin.img' exited with error (-6)

This error can also be an issue with the syslinux package. Try updating to the latest version for your distro.

device-mapper issues

unable to remove open device

This is a race condition with device-mapper in Fedora: https://bugzilla.redhat.com/show_bug.cgi?id=506644 . Usually rerunning the MIC2 command will resolve this.

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值