实验8 filter-policy过滤路由

1. 建立物理连接
   

2. RTA,RTB,RTC使能全部接口，转为ripv2，取消自动聚合。
   [RTA-rip-1]display this

   rip 1
   undo summary
   version 2
   network 10.0.0.0
   network 192.168.1.0

   return
   [RTB-rip-1]display this

   rip 1
   undo summary
   version 2
   network 192.168.1.0
   network 192.168.2.0

[RTC-rip-1]display this

rip 1
undo summary
version 2
network 192.168.2.0
network 192.168.3.0

return
[RTA-Serial1/0]rip summary-address 10.0.0.0 23

1. 配置路由过滤
   [RTB]ip prefix-list abc index 10 deny 10.0.0.0 23
   [RTB]ip prefix-list abc index 20 permit 10.0.0.0 0 less-equal 32

[RTB-rip-1]display ip routing-table

Destinations : 19 Routes : 19

Destination/Mask Proto Pre Cost NextHop Interface
0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0
192.168.1.0/30 Direct 0 0 192.168.1.2 Ser1/0
192.168.1.0/32 Direct 0 0 192.168.1.2 Ser1/0
192.168.1.1/32 Direct 0 0 192.168.1.1 Ser1/0
192.168.1.2/32 Direct 0 0 127.0.0.1 InLoop0
192.168.1.3/32 Direct 0 0 192.168.1.2 Ser1/0
192.168.2.0/30 Direct 0 0 192.168.2.1 Ser2/0
192.168.2.0/32 Direct 0 0 192.168.2.1 Ser2/0
192.168.2.1/32 Direct 0 0 127.0.0.1 InLoop0
192.168.2.2/32 Direct 0 0 192.168.2.2 Ser2/0
192.168.2.3/32 Direct 0 0 192.168.2.1 Ser2/0
192.168.3.0/24 RIP 100 1 192.168.2.2 Ser2/0
224.0.0.0/4 Direct 0 0 0.0.0.0 NULL0
224.0.0.0/24 Direct 0 0 0.0.0.0 NULL0
255.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0

//过滤后，RTB和RTC没有RTA的聚合后的路由

[RTB]display ip prefix-list name abc
Prefix-list: abc
Permitted 7
Denied 7
index: 10 Deny 10.0.0.0/23
index: 20 Permit 0.0.0.0/0 le 32

//RTA周期性发送聚合路由10.0.0.0/23和192.168.1.0/24，所以拒绝和允许是一样的。

转载于:https://www.cnblogs.com/akiz/p/11148063.html