在调试高压感电的项目时,J-Link使用总是出现问题:
解决方法
1、J-Link驱动要下载最新的,最好是驱动精灵设别出来的。
2、second debugger connection to the same J-Link detected --------不同时打开J-Flash ARM V4.72a和keil
3、no found SW-D device ----------把keil4.12卸载,下了个4.22,结果好了
在调试高压感电的项目时,J-Link使用总是出现问题:
解决方法
1、J-Link驱动要下载最新的,最好是驱动精灵设别出来的。
2、second debugger connection to the same J-Link detected --------不同时打开J-Flash ARM V4.72a和keil
3、no found SW-D device ----------把keil4.12卸载,下了个4.22,结果好了
转载于:https://www.cnblogs.com/Iamchritian--forthegloryofGod/p/3363825.html