Cacti监控磁盘IO

所需软件:此软件网上并不是太好找，建议大家好好收藏

snmpdiskio-0.9.6.zip

下载点http://www.colderboy.com/wp-content/uploads/2011/08/snmpdiskio.rar

 

1.把解压之后文件夹下的snmpdiskio文件上传到被监控服务器的/usr/local/bin目录下;

由于9.4太老不支持2.6内核,需要修改, 这里下载的包我已经更新过已经支持2.6内核.

 

2.把解压之后文件夹下的 partition.xml上传到cacti监控服务器的

/www/cacti/resource/snmp_queries/目录下，这里我的CACTI的

目录文件为以上，大家可以根据实际情况修改。

且分别导入2个模板：

cacti_graph_template_disk_io_bytessec.xml

cacti_data_query_snmp_disk_statistics.xml

 

3修改snmp配置文件/etc/snmp/snmpd.conf

#----------------------------------------------------------------------------------

com2sec local          localhost            public

com2sec local   监控IP 地址         public

com2sec mynetwork NETWORK/24                COMMUNITY

group MyRWGroup v1                          local

group MyRWGroup v2c                         local

group MyRWGroup usm                         local

group MyROGroup v1                          mynetwork

group MyROGroup v2c                         mynetwork

group MyROGroup usm                         mynetwork

view all       included    .1                80

access MyROGroup ""               any       noauth      exact    all     none    none

access MyRWGroup ""               any       noauth       exact   all     all     none

syslocation etiantian.org

syscontact Me <zlyzhangluya@163.com>

proc mountd

proc ntalkd 4

proc sendmail 10 1

proc httpd     10 1

exec echotest /bin/echo hello world

exec disk_used_shell       /bin/sh   /root/current_disk_used.sh

exec httpd_proc           /bin/sh   /root/current_httpd_proc.sh

disk /           10000

disk /boot       10000

load 12 14 14

#以下五行是我添加的内容

exec .1.3.6.1.4.1.2021.54 hdNum /bin/sh /usr/local/bin/snmpdiskio hdNum

exec .1.3.6.1.4.1.2021.55 hdIndex /bin/sh /usr/local/bin/snmpdiskio hdIndex

exec .1.3.6.1.4.1.2021.56 hdDescr /bin/sh /usr/local/bin/snmpdiskio hdDescr

exec .1.3.6.1.4.1.2021.57 hdInBlocks /bin/sh /usr/local/bin/snmpdiskio hdInBlocks

exec .1.3.6.1.4.1.2021.58 hdOutBlocks /bin/sh /usr/local/bin/snmpdiskio hdOutBlocks

#----------------------------------------------------------------------------------

 

4重启snmpd服务

/etc/init.d/snmpd restart

 

五:在cacti监控主机上测试

 

yum install -y net-snmp-utils*

 

[root@mail ~]# snmpwalk -v 2c -c public localhost .1.3.6.1.4.1.2021.58

UCD-SNMP-MIB::ucdavis.58.1.1 = INTEGER: 1

UCD-SNMP-MIB::ucdavis.58.2.1 = STRING: "hdOutBlocks"

UCD-SNMP-MIB::ucdavis.58.3.1 = STRING: "/bin/sh /usr/local/bin/snmpdiskio hdOutBlocks"

UCD-SNMP-MIB::ucdavis.58.100.1 = INTEGER: 0

UCD-SNMP-MIB::ucdavis.58.101.1 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.2 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.3 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.4 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.5 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.6 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.7 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.8 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.9 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.10 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.11 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.12 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.13 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.14 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.15 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.16 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.17 = STRING: "641941504"

UCD-SNMP-MIB::ucdavis.58.101.18 = STRING: "701440"

UCD-SNMP-MIB::ucdavis.58.101.19 = STRING: "224997888"

UCD-SNMP-MIB::ucdavis.58.101.20 = STRING: "297335296"

UCD-SNMP-MIB::ucdavis.58.101.21 = STRING: "2048"

UCD-SNMP-MIB::ucdavis.58.101.22 = STRING: "66200576"

UCD-SNMP-MIB::ucdavis.58.101.23 = STRING: "659456"

UCD-SNMP-MIB::ucdavis.58.101.24 = STRING: "51835904"

UCD-SNMP-MIB::ucdavis.58.101.25 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.101.26 = STRING: "0"

UCD-SNMP-MIB::ucdavis.58.102.1 = INTEGER: 0

UCD-SNMP-MIB::ucdavis.58.103.1 = ""

 

看到以上内容说配置成功.

 

5.CACTI模版配置,这里有点小难度,需要特别注意

 

找到Templates-->Host Templates-->找到又上方的Add添加一个主机模版

 

点开add之后输入创建的主机模版的名字例如:LINUX-disk-io点击create 进入下一步配置

 

在Associated Graph Templates选择Disk-I/O (bytes/sec)点击Add添加

 

在Associated Data Queries选择SNMP-Disk Statistics点击 Add 添加

 

最后点击 Save 保存完成。

 

6.为主机创建Graphs

Devices --> 选择 一个主机 --> Host Template 选择刚刚创建的linux-disk-io 点击保存

点击上方的 *Create Graphs for this Host在下面就能看到Data Query [SNMP - Disk Statistics]

这样列表，列表内显示你硬盘的信息。选择你需要监控的磁盘点击创建完成。

转载于:https://www.cnblogs.com/spcc/archive/2012/07/05/2577307.html