分析网桥bond及调整网卡速度

分析网桥相关bond信息

１． 查看所有网桥

[root@node-1 ~]# ip r | grep br-
default via 172.18.0.1 dev br-pub 
10.30.1.0/24 dev br-roller proto kernel scope link src 10.30.1.3 
10.233.0.0/18 dev br-mgmt scope link 
10.233.64.0/24 via 192.168.20.6 dev br-mgmt 
10.233.65.0/24 via 192.168.20.7 dev br-mgmt 
10.233.66.0/24 via 192.168.20.5 dev br-mgmt 
10.233.67.0/24 via 192.168.20.8 dev br-mgmt 
10.233.68.0/24 via 192.168.20.9 dev br-mgmt 
10.233.70.0/24 via 192.168.20.4 dev br-mgmt 
172.16.0.0/16 via 172.19.0.1 dev br-pub 
172.18.0.0/16 dev br-pub proto kernel scope link src 172.18.0.3 
172.19.0.0/24 dev br-pub proto kernel scope link src 172.19.0.3 
192.168.11.0/24 dev br-storage proto kernel scope link src 192.168.11.2 
192.168.12.0/24 dev br-ipmi proto kernel scope link src 192.168.12.2 
192.168.14.0/24 dev br-vxlan proto kernel scope link src 192.168.14.2 
192.168.15.0/24 dev br-storagepub proto kernel scope link src 192.168.15.2 
192.168.20.0/24 dev br-mgmt proto kernel scope link src 192.168.20.3 

２．查看管理网桥下的bond信息

[root@node-1 ~]# ovs-vsctl list-ports br-mgmt 
br-mgmt--br-Bond1

３．查看网桥下的网卡

[root@node-1 ~]# ovs-vsctl list-ifaces br-Bond0
br-Bond0--br-storage
enp5s0f0
enp5s0f1

４． down 一个网卡

ip link set enp5s0f0 down

５．启动该网卡

ip link set enp5s0f0 up

调整网卡速度

１． 确保该网卡可以调速

[root@node-3 ~]# ethtool eno1
Settings for eno1:
	Supported ports: [ TP ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Supported pause frame use: Symmetric
	Supports auto-negotiation: Yes
	Advertised link modes:  1000baseT/Full 
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: Yes
	Speed: 1000Mb/s
	Duplex: Full
	Port: Twisted Pair
	PHYAD: 1
	Transceiver: internal
	Auto-negotiation: on
	MDI-X: off (auto)
	Supports Wake-on: pumbg
	Wake-on: d
	Current message level: 0x00000007 (7)
			       drv probe link
	Link detected: yes

如上，一块千兆网卡，支持调速成百兆和十兆．

２．调整该网卡，限速100M

[root@node-3 ~]# ethtool -s eno1 speed  100 duplex full

[root@node-3 ~]# ethtool eno1
Settings for eno1:
	Supported ports: [ TP ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Supported pause frame use: Symmetric
	Supports auto-negotiation: Yes
	Advertised link modes:  100baseT/Full 
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: Yes
	Speed: 100Mb/s
	Duplex: Full
	Port: Twisted Pair
	PHYAD: 1
	Transceiver: internal
	Auto-negotiation: on
	MDI-X: off (auto)
	Supports Wake-on: pumbg
	Wake-on: d
	Current message level: 0x00000007 (7)
			       drv probe link
	Link detected: yes

３．调整网卡，限速10M

[root@node-3 ~]# ethtool -s eno1 speed  10 duplex full

[root@node-3 ~]# ethtool eno1
Settings for eno1:
	Supported ports: [ TP ]
	Supported link modes:   10baseT/Half 10baseT/Full 
	                        100baseT/Half 100baseT/Full 
	                        1000baseT/Full 
	Supported pause frame use: Symmetric
	Supports auto-negotiation: Yes
	Advertised link modes:  1000baseT/Full 
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: Yes
	Speed: 10Mb/s
	Duplex: Full
	Port: Twisted Pair
	PHYAD: 1
	Transceiver: internal
	Auto-negotiation: on
	MDI-X: off (auto)
	Supports Wake-on: pumbg
	Wake-on: d
	Current message level: 0x00000007 (7)
			       drv probe link
	Link detected: yes

４．可以通过目录 /sys/class/net/网卡名/speed, 查看该网卡对应的当前速度

[root@node-3 ~]# cat /sys/class/net/eno1/speed 
1000