有朋友问起:MSSQL中如何用SQL清除所有表的数据?这个需求分三种类型:
第一:只要数据库中表是空的;
第二:表是空的,并且自增长列可以从1开始增长。
第三:表是空的,并且自增长列可以从1开始增长,而且存在表间的约束。
邀月稍微整理了下,放在这里,便于有需要的朋友参阅。
其实,这不算什么需求。只要用数据库的生成脚本,几分钟即可生成一个干净的表结构及存储过程、视图、约束等。这里提供了另一种用SQL解决问题的方案。权当是无聊的学习,加深点印象吧。呵呵。
首先,作一些假设:假设database名为
TestDB_2000_2005_2008
预先准备一些脚本
Code
use master
go
IF OBJECT_ID('TestDB_2000_2005_2008') IS NOT NULL
-- print 'Exist databse!'
-- else print 'OK!'
DROP Database TestDB_2000_2005_2008
GO
Create database TestDB_2000_2005_2008
go
use TestDB_2000_2005_2008
go
IF OBJECT_ID('b') IS NOT NULL
drop table b
go
create table b(id int identity(1,1),ba int,bb int)
--truncate table b
insert into b
select 1,1 union all
select 2,2 union all
select 1,1
IF OBJECT_ID('c') IS NOT NULL
drop table c
go
create table c(id int identity(1,1),ca int,cb int)
insert into c
select 1,2 union all
select 1,3
先来看看第一种需求:
只要数据库中表是空的。
这个其实并不难,用一个游标循环得出所有表名,再清除所有表,delete或truncate table
提供几个语句:以下语句均在SQL2000/SQL2005/SQL2008下使用通过。
方法甲:
Code
/********************MSSQL 2000/2005/2008***********************/
use TestDB_2000_2005_2008
go
select * from b
select * from c
Declare @t varchar (1024)
Declare @SQL varchar(2048)
Declare tbl_cur cursor for select TABLE_NAME from INFORMATION_SCHEMA.TABLES WHERE TABLE_TYPE = 'BASE TABLE'
OPEN tbl_cur FETCH NEXT from tbl_cur INTO @t
WHILE @@FETCH_STATUS = 0
BEGIN
SET @SQL='TRUNCATE TABLE '+ @t
--print (@SQL)
EXEC (@SQL)
FETCH NEXT from tbl_cur INTO @t
END
CLOSE tbl_cur
DEALLOCATE tbl_Cur
select * from b
select * from c
方法乙:
Code
![ExpandedBlockStart.gif](https://www.cnblogs.com/Images/OutliningIndicators/ExpandedBlockStart.gif)
/**//********************MSSQL 2000/2005/2008***********************/
use TestDB_2000_2005_2008
go
select * from b
select * from c
select * from d
select * from e
![](https://www.cnblogs.com/Images/OutliningIndicators/None.gif)
DECLARE @TableName VARCHAR(256)
DECLARE @varSQL VARCHAR(512)
DECLARE @getTBName CURSOR SET @getTBName = CURSOR FOR SELECT name FROM sys.Tables WHERE NAME NOT LIKE 'Category'
![](https://www.cnblogs.com/Images/OutliningIndicators/None.gif)
OPEN @getTBName FETCH NEXT FROM @getTBName INTO @TableName
WHILE @@FETCH_STATUS = 0
BEGIN
SET @varSQL = 'Truncate table '+ @TableName
![](https://www.cnblogs.com/Images/OutliningIndicators/None.gif)
--PRINT (@varSQL)
EXEC (@varSQL)
FETCH NEXT FROM @getTBName INTO @TableName
END
![](https://www.cnblogs.com/Images/OutliningIndicators/None.gif)
CLOSE @getTBName
DEALLOCATE @getTBName
![](https://www.cnblogs.com/Images/OutliningIndicators/None.gif)
----select * from b
----select * from c
方法丙:
Code
Declare @t table(query varchar(2000),tables varchar(100))
Insert into @t
select 'Truncate table ['+T.table_name+']', T.Table_Name from INFORMATION_SCHEMA.TABLES T
left outer join INFORMATION_SCHEMA.TABLE_CONSTRAINTS TC
on T.table_name=TC.table_name
where (TC.constraint_Type ='Foreign Key' or TC.constraint_Type is NULL) and
T.table_name not in ('dtproperties','sysconstraints','syssegments') and
Table_type='BASE TABLE'
![](https://www.cnblogs.com/Images/OutliningIndicators/None.gif)
Insert into @t
select 'delete from ['+T.table_name+']', T.Table_Name from INFORMATION_SCHEMA.TABLES T
left outer join INFORMATION_SCHEMA.TABLE_CONSTRAINTS TC
on T.table_name=TC.table_name where TC.constraint_Type ='Primary Key' and T.table_name <>'dtproperties'and Table_type='BASE TABLE'
![](https://www.cnblogs.com/Images/OutliningIndicators/None.gif)
Declare @sql varchar(8000)
Select @sql=IsNull(@sql+' ','')+ query from @t
print(@sql)
Exec(@sql)
再来看看第二种需求:
表是空的,并且自增长列可以从1开始增长
。
这种需求其实和第一种差不多。
因为我们在以上语句中使用的是
truncate table
语句,所以,表的自增长列
是默认从头重新的。
关键是第三种需求:
表是空的,并且自增长列可以从1开始增长
,而且存在表间的约束。
这是个比较头痛的问题。因为外键约束,不能使用truncate table语句,但是,如果使用delete,又不能使自增长列从1开始重排。
我们不妨先来增加一些约束条件:
Code
CREATE TABLE [d] (
[id] [int] IDENTITY (1, 1) NOT NULL ,
[da] [int] NULL ,
[db] [int] NULL ,
CONSTRAINT [PK_d] PRIMARY KEY CLUSTERED
(
[id]
) ON [PRIMARY]
) ON [PRIMARY]
![](https://www.cnblogs.com/Images/OutliningIndicators/None.gif)
CREATE TABLE [e] (
[id] [int] IDENTITY (1, 1) NOT NULL ,
[da] [int] NULL ,
[db] [int] NULL ,
[did] [int] NULL ,
CONSTRAINT [FK_e_d] FOREIGN KEY
(
[did]
) REFERENCES [d] (
[id]
)
) ON [PRIMARY]
![](https://www.cnblogs.com/Images/OutliningIndicators/None.gif)
insert into d
select 5,6 union all
select 7,8 union all
select 9,9
![](https://www.cnblogs.com/Images/OutliningIndicators/None.gif)
insert into e
select 8,6,1 union all
select 8,8,2 union all
select 8,9,2
此时再来执行甲乙丙语句时会提示:
“无法截断表 'd',因为该表正由 FOREIGN KEY 约束引用。”
我们可以这样设想:
1、先找出没有外键约束的表,truncate
2、有外键的表,先delete,再复位identity列
于是得出,
语句丁(
注意没有使用游标)
Code
SET NoCount ON
DECLARE @tableName varchar(512)
Declare @SQL varchar(2048)
SET @tableName=''
WHILE EXISTS
(
--Find all child tables and those which have no relations
SELECT T.table_name FROM INFORMATION_SCHEMA.TABLES T
LEFT OUTER JOIN INFORMATION_SCHEMA.TABLE_CONSTRAINTS TC ON T.table_name = TC.table_name
WHERE ( TC.constraint_Type = 'Foreign Key' OR TC.constraint_Type IS NULL )
AND T.table_name NOT IN ( 'dtproperties', 'sysconstraints', 'syssegments' )
AND Table_type = 'BASE TABLE'
AND T.table_name > @TableName
)
Begin
SELECT @tableName = min(T.table_name) FROM INFORMATION_SCHEMA.TABLES T
LEFT OUTER JOIN INFORMATION_SCHEMA.TABLE_CONSTRAINTS TC ON T.table_name=TC.table_name
WHERE ( TC.constraint_Type = 'Foreign Key' OR TC.constraint_Type IS NULL )
AND T.table_name NOT IN ( 'dtproperties', 'sysconstraints', 'syssegments' )
AND Table_type = 'BASE TABLE'
AND T.table_name > @TableName
--Truncate the table
SET @SQL = 'Truncate table '+ @TableName
print (@SQL)
Exec(@SQL)
End
SET @TableName=''
WHILE EXISTS
(
--Find all Parent tables
SELECT T.table_name FROM INFORMATION_SCHEMA.TABLES T
LEFT OUTER JOIN INFORMATION_SCHEMA.TABLE_CONSTRAINTS TC ON T.table_name = TC.table_name
WHERE TC.constraint_Type = 'Primary Key'
AND T.table_name <> 'dtproperties'
AND Table_type='BASE TABLE'
AND T.table_name > @TableName
)
Begin
SELECT @tableName = min(T.table_name) FROM INFORMATION_SCHEMA.TABLES T
LEFT OUTER JOIN INFORMATION_SCHEMA.TABLE_CONSTRAINTS TC ON T.table_name=TC.table_name
WHERE TC.constraint_Type = 'Primary Key'
AND T.table_name <> 'dtproperties'
AND Table_type = 'BASE TABLE'
AND T.table_name > @TableName
--Delete the table
SET @SQL = ' delete from '+ @TableName
print (@SQL)
Exec(@SQL)
--Reset identity column
IF EXISTS ( SELECT * FROM INFORMATION_SCHEMA.COLUMNS
WHERE COLUMNPROPERTY(
OBJECT_ID( QUOTENAME(table_schema)+ '.' + QUOTENAME(@tableName) ),
column_name,'IsIdentity'
) = 1
)
![](https://www.cnblogs.com/Images/OutliningIndicators/None.gif)
DBCC CHECKIDENT(@tableName,RESEED,0)
End
SET NoCount OFF
小结:除了以上方法,还可以临时禁用外键约束。语句为:
--
--禁用所有约束
--
exec sp_msforeachtable 'alter table ? nocheck CONSTRAINT all'
--
--再启用所有外键约束
--
exec sp_msforeachtable 'alter table ? check constraint all'