移动电视盒子cm311-1a安装armbian 运行MMDVMHost 成功

1.移动盒子刷机 安装armbian请参考

魔百盒cm311刷armbian系统，做家庭服务器静音又省电_哔哩哔哩_bilibili

2.安装好armbian后 进入系统

下载mmdvm   命令  git clone https://github.com/g4klx/MMDVMHost.git

执行命令

cd MMDVMHost/


sudo apt install libsamplerate0-dev

make&&make install

配置MMDVM.ini

nano ​MMDVM.ini

​

如下 修改加粗部分

[General]
Callsign=BG6MGD
Id=1234567
Timeout=180
Duplex=0
# ModeHang=10
RFModeHang=10
NetModeHang=3
Display=None
Daemon=0

[Info]
RXFrequency=433600000
TXFrequency=433600000
Power=1
# The following lines are only needed if a direct connection to a DMR master is being used
Latitude=0.0
Longitude=0.0
Height=0
Location=Nowhere
Description=Multi-Mode Repeater
URL=www.google.co.uk

[Log]
# Logging levels, 0=No logging
DisplayLevel=1
FileLevel=1
FilePath=.
FileRoot=MMDVM
FileRotate=1

[CW Id]
Enable=0
Time=10
# Callsign=

[DMR Id Lookup]
File=DMRIds.dat
Time=24

[NXDN Id Lookup]
File=NXDN.csv
Time=24

[Modem]
# Valid values are "null", "uart", "udp", and (on Linux) "i2c"
Protocol=uart
# The port and speed used for a UART connection
# UARTPort=\\.\COM4
# UARTPort=/dev/ttyACM0
UARTPort=/dev/ttyUSB0
UARTSpeed=115200
# The port and address for an I2C connection
I2CPort=/dev/i2c
I2CAddress=0x22
# IP parameters for UDP connection
ModemAddress=192.168.2.100
ModemPort=3334
LocalAddress=192.168.2.1
LocalPort=3335

TXInvert=1
RXInvert=0
PTTInvert=0
TXDelay=100
RXOffset=0
TXOffset=0
DMRDelay=0
RXLevel=50
TXLevel=50
RXDCOffset=0
TXDCOffset=0
RFLevel=100
# CWIdTXLevel=50
# D-StarTXLevel=50
# DMRTXLevel=50
# YSFTXLevel=50
# P25TXLevel=50
# NXDNTXLevel=50
# M17TXLevel=50
# POCSAGTXLevel=50
# FMTXLevel=50
# AX25TXLevel=50
RSSIMappingFile=RSSI.dat
UseCOSAsLockout=0
Trace=0
Debug=0

[Transparent Data]
Enable=0
RemoteAddress=127.0.0.1
RemotePort=40094
LocalPort=40095
# SendFrameType=0

[D-Star]
Enable=0
Module=C
SelfOnly=0
AckReply=1
AckTime=750
AckMessage=0
ErrorReply=1
RemoteGateway=0
# ModeHang=10
WhiteList=

[DMR]
Enable=1
Beacons=0
BeaconInterval=60
BeaconDuration=3
ColorCode=1
SelfOnly=0
EmbeddedLCOnly=0
DumpTAData=1
# Prefixes=234,235
# Slot1TGWhiteList=
# Slot2TGWhiteList=
CallHang=3
TXHang=4
# ModeHang=10
# OVCM Values, 0=off, 1=rx_on, 2=tx_on, 3=both_on, 4=force off
# OVCM=0

[System Fusion]
Enable=0
LowDeviation=0
SelfOnly=0
TXHang=4
RemoteGateway=0
# ModeHang=10

[P25]
Enable=0
NAC=293
SelfOnly=0
OverrideUIDCheck=0
RemoteGateway=0
TXHang=5
# ModeHang=10

[NXDN]
Enable=0
RAN=1
SelfOnly=0
RemoteGateway=0
TXHang=5
# ModeHang=10

[M17]
Enable=0
CAN=0
SelfOnly=0
TXHang=5
# ModeHang=10

[POCSAG]
Enable=0
Frequency=439987500

[FM]
Enable=0
# Callsign=G4KLX
CallsignSpeed=20
CallsignFrequency=1000
CallsignTime=10
CallsignHoldoff=0
CallsignHighLevel=50
CallsignLowLevel=20
CallsignAtStart=1
CallsignAtEnd=1
CallsignAtLatch=0
RFAck=K
ExtAck=N
AckSpeed=20
AckFrequency=1750
AckMinTime=4
AckDelay=1000
AckLevel=50
# Timeout=180
TimeoutLevel=80
CTCSSFrequency=88.4
CTCSSThreshold=30
# CTCSSHighThreshold=30
# CTCSSLowThreshold=20
CTCSSLevel=20
KerchunkTime=0
HangTime=7
# AccessMode values are:
#   0 - Carrier access with COS
#   1 - CTCSS only access without COS
#   2 - CTCSS only access with COS
#   3 - CTCSS only access with COS to start, then carrier access with COS
AccessMode=1
# LinkMode=1 to remove almost all of the logic control
LinkMode=0
COSInvert=0
NoiseSquelch=0
SquelchThreshold=30
# SquelchHighThreshold=30
# SquelchLowThreshold=20
RFAudioBoost=1
MaxDevLevel=90
ExtAudioBoost=1
# ModeHang=10

[AX.25]
Enable=0
TXDelay=300
RXTwist=6
SlotTime=30
PPersist=128
Trace=1

[D-Star Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=20011
GatewayAddress=127.0.0.1
GatewayPort=20010
# ModeHang=3
Debug=0

[DMR Network]
Enable=1
# Type may be either 'Direct' or 'Gateway'. When Direct you must provide the Master's
# address as well as the Password, and for DMR+, Options also.
Type=Direct
#LocalAddress=127.0.0.1
#LocalPort=62032
RemoteAddress=47.100.76.205
RemotePort=62031
Password=123456789
Jitter=360
Slot1=1
Slot2=1
# Options=
# ModeHang=3
Debug=0

[System Fusion Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=3200
GatewayAddress=127.0.0.1
GatewayPort=4200
# ModeHang=3
Debug=0

[P25 Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=32010
GatewayAddress=127.0.0.1
GatewayPort=42020
# ModeHang=3
Debug=0

[NXDN Network]
Enable=0
Protocol=Icom
LocalAddress=127.0.0.1
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020
# ModeHang=3
Debug=0

[M17 Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=17011
GatewayAddress=127.0.0.1
GatewayPort=17010
# ModeHang=3
Debug=0

[POCSAG Network]
Enable=0
LocalAddress=127.0.0.1
LocalPort=3800
GatewayAddress=127.0.0.1
GatewayPort=4800
# ModeHang=3
Debug=0

[FM Network]
Enable=0
# Protocol may be USRP or RAW
Protocol=USRP
# SampleRate is only used in RAW mode
SampleRate=48000
# The squelch file is optional and only used in RAW mode
SquelchFile=/tmp/sql
LocalAddress=127.0.0.1
LocalPort=3810
GatewayAddress=127.0.0.1
GatewayPort=4810
PreEmphasis=1
DeEmphasis=1
TXAudioGain=1.0
RXAudioGain=1.0
# ModeHang=3
Debug=0

[AX.25 Network]
Enable=0
Port=/dev/ttyp7
Speed=9600
Debug=0

[TFT Serial]
# Port=modem
Port=/dev/ttyAMA0
Brightness=50

[HD44780]
Rows=2
Columns=16

# For basic HD44780 displays (4-bit connection)
# rs, strb, d0, d1, d2, d3
Pins=11,10,0,1,2,3

# Device address for I2C
I2CAddress=0x20

# PWM backlight
PWM=0
PWMPin=21
PWMBright=100
PWMDim=16

DisplayClock=1
UTC=0

[Nextion]
# Port=modem
Port=/dev/ttyAMA0
Brightness=50
DisplayClock=1
UTC=0
#Screen Layout: 0=G4KLX 2=ON7LDS
ScreenLayout=2
IdleBrightness=20

[OLED]
Type=3
Brightness=0
Invert=0
Scroll=1
Rotate=0
Cast=0
LogoScreensaver=1

[LCDproc]
Address=localhost
Port=13666
#LocalPort=13667
DimOnIdle=0
DisplayClock=1
UTC=0

[Lock File]
Enable=0
File=/tmp/MMDVM_Active.lck

[Remote Control]
Enable=0
Address=127.0.0.1
Port=7642

执行命令 运行程序

  ./MMDVMHost MMDVM.ini

另设置服务

在root目录下写个脚本

nano mmdvm.sh

写入以下

#!/bin/sh
cd MMDVMHost/
./MMDVMHost MMDVM.ini

给mmdvm.sh 可执行权限  使用命令

chmod +x mmdvm.sh

建一个服务

nano /etc/systemd/system/mmdvm.service
写入以下内容

[Unit]
Description=mmdvm.service#描述

[Service]
Type=simple
WorkingDirectory=/root
ExecStart=/root/mmdvm.sh
ExecStop=/bin/kill -s TERM $MAINPID   #关闭

[Install]
WantedBy=multi-user.target
 

4.重载
systemctl daemon-reload

4.把myapp服务加入开机启动:

systemctl enable mmdvm.service

5.启动myapp服务:

systemctl start mmdvm.service

6.关闭myapp服务:

systemctl stop mmdvm.service

7.查看myapp服务状态:

systemctl status mmdvm.service