#3.10.0-862.el7.x86_64
#CentOS Linux release 7.5.1804
 
abi.vsyscall32 = 1
crypto.fips_enabled = 0
debug.exception-trace = 1
debug.kprobes-optimization = 1
debug.panic_on_rcu_stall = 0
dev.cdrom.autoclose = 1
dev.cdrom.autoeject = 0
dev.cdrom.check_media = 0
dev.cdrom.debug = 0
dev.cdrom.info = CD-ROM information, Id: cdrom.c 3.20 2003/12/17
dev.cdrom.info = 
dev.cdrom.info = drive name: sr0
dev.cdrom.info = drive speed: 1
dev.cdrom.info = drive # of slots: 1
dev.cdrom.info = Can close tray: 1
dev.cdrom.info = Can open tray: 1
dev.cdrom.info = Can lock tray: 1
dev.cdrom.info = Can change speed: 1
dev.cdrom.info = Can select disk: 0
dev.cdrom.info = Can read multisession: 1
dev.cdrom.info = Can read MCN: 1
dev.cdrom.info = Reports media changed: 1
dev.cdrom.info = Can play audio: 1
dev.cdrom.info = Can write CD-R: 1
dev.cdrom.info = Can write CD-RW: 1
dev.cdrom.info = Can read DVD: 1
dev.cdrom.info = Can write DVD-R: 1
dev.cdrom.info = Can write DVD-RAM: 1
dev.cdrom.info = Can read MRW: 1
dev.cdrom.info = Can write MRW: 1
dev.cdrom.info = Can write RAM: 1
dev.cdrom.info = 
dev.cdrom.info = 
dev.cdrom.lock = 1
dev.hpet.max-user-freq = 64
dev.mac_hid.mouse_button2_keycode = 97
dev.mac_hid.mouse_button3_keycode = 100
dev.mac_hid.mouse_button_emulation = 0
dev.parport.default.spintime = 500
dev.parport.default.timeslice = 200
dev.raid.speed_limit_max = 200000 #RAID最大读取速率，如果RAID性能较高，可以修改此上限来提升IO性能
dev.raid.speed_limit_min = 1000 #RAID最小读取速率
dev.scsi.logging_level = 0 #是否开启scsi磁盘的日志功能，一般情况不建议开启
fs.aio-max-nr = 65536
fs.aio-nr = 0
fs.binfmt_misc.status = enabled
fs.dentry-state = 23528 10917 45 0 0 0
fs.dir-notify-enable = 1
fs.epoll.max_user_watches = 411340
fs.file-max = 197872
fs.file-nr = 1120 0 197872
fs.inode-nr = 20574 298
fs.inode-state = 20574 298 0 0 0 0 0
fs.inotify.max_queued_events = 16384
fs.inotify.max_user_instances = 128
fs.inotify.max_user_watches = 8192
fs.lease-break-time = 45
fs.leases-enable = 1
fs.may_detach_mounts = 0
fs.mount-max = 100000
fs.mqueue.msg_default = 10
fs.mqueue.msg_max = 10
fs.mqueue.msgsize_default = 8192
fs.mqueue.msgsize_max = 8192
fs.mqueue.queues_max = 256
fs.nr_open = 1048576
fs.overflowgid = 65534
fs.overflowuid = 65534
fs.pipe-max-size = 1048576
fs.pipe-user-pages-hard = 0
fs.pipe-user-pages-soft = 16384
fs.protected_hardlinks = 1
fs.protected_symlinks = 1
fs.quota.allocated_dquots = 0
fs.quota.cache_hits = 0
fs.quota.drops = 0
fs.quota.free_dquots = 0
fs.quota.lookups = 0
fs.quota.reads = 0
fs.quota.syncs = 0
fs.quota.warnings = 1
fs.quota.writes = 0
fs.suid_dumpable = 0
kernel.acct = 4 2 30
kernel.acpi_video_flags = 0
kernel.auto_msgmni = 1
kernel.bootloader_type = 114
kernel.bootloader_version = 2
kernel.cad_pid = 1
kernel.cap_last_cap = 36
kernel.compat-log = 1
kernel.core_pattern = core
kernel.core_pipe_limit = 0
kernel.core_uses_pid = 1
kernel.ctrl-alt-del = 0
kernel.dmesg_restrict = 0
kernel.domainname = (none)
kernel.ftrace_dump_on_oops = 0
kernel.ftrace_enabled = 1
kernel.hardlockup_all_cpu_backtrace = 0
kernel.hardlockup_panic = 1
kernel.hostname = example_server.com #由此可以看出，主机名是属于内核的
kernel.hotplug = 
kernel.hung_task_check_count = 4194304
kernel.hung_task_panic = 0
kernel.hung_task_timeout_secs = 120
kernel.hung_task_warnings = 10
kernel.io_delay_type = 0
kernel.kexec_load_disabled = 0
kernel.keys.gc_delay = 300
kernel.keys.maxbytes = 20000
kernel.keys.maxkeys = 200
kernel.keys.persistent_keyring_expiry = 259200
kernel.keys.root_maxbytes = 25000000
kernel.keys.root_maxkeys = 1000000
kernel.kptr_restrict = 0
kernel.max_lock_depth = 1024
kernel.modprobe = /sbin/modprobe
kernel.modules_disabled = 0
kernel.msg_next_id = -1
kernel.msgmax = 8192
kernel.msgmnb = 16384
kernel.msgmni = 3958
kernel.ngroups_max = 65536
kernel.nmi_watchdog = 1
kernel.ns_last_pid = 1651
kernel.numa_balancing = 0
kernel.numa_balancing_scan_delay_ms = 1000
kernel.numa_balancing_scan_period_max_ms = 60000
kernel.numa_balancing_scan_period_min_ms = 1000
kernel.numa_balancing_scan_size_mb = 256
kernel.numa_balancing_settle_count = 4
kernel.osrelease = 3.10.0-862.el7.x86_64
kernel.ostype = Linux
kernel.overflowgid = 65534
kernel.overflowuid = 65534
kernel.panic = 0
kernel.panic_on_io_nmi = 0
kernel.panic_on_oops = 1
kernel.panic_on_stackoverflow = 0
kernel.panic_on_unrecovered_nmi = 0
kernel.panic_on_warn = 0
kernel.perf_cpu_time_max_percent = 25
kernel.perf_event_max_sample_rate = 100000
kernel.perf_event_mlock_kb = 516
kernel.perf_event_paranoid = 2
kernel.pid_max = 131072
kernel.poweroff_cmd = /sbin/poweroff
kernel.print-fatal-signals = 0
kernel.printk = 4 4 1 7
kernel.printk_delay = 0
kernel.printk_ratelimit = 5
kernel.printk_ratelimit_burst = 10
kernel.pty.max = 4096
kernel.pty.nr = 1
kernel.pty.reserve = 1024
kernel.random.boot_id = b91ea354-c5d0-4c48-abcd-18da3dcd6741
kernel.random.entropy_avail = 978
kernel.random.poolsize = 4096
kernel.random.read_wakeup_threshold = 64
kernel.random.urandom_min_reseed_secs = 60
kernel.random.uuid = 923d2748-02d8-47b8-968d-9c2b7c420bec
kernel.random.write_wakeup_threshold = 896
kernel.randomize_va_space = 2
kernel.real-root-dev = 0
kernel.sched_autogroup_enabled = 0
kernel.sched_cfs_bandwidth_slice_us = 5000
kernel.sched_child_runs_first = 0
kernel.sched_domain.cpu0.domain0.busy_factor = 32
kernel.sched_domain.cpu0.domain0.busy_idx = 2
kernel.sched_domain.cpu0.domain0.cache_nice_tries = 1
kernel.sched_domain.cpu0.domain0.flags = 559
kernel.sched_domain.cpu0.domain0.forkexec_idx = 0
kernel.sched_domain.cpu0.domain0.idle_idx = 0
kernel.sched_domain.cpu0.domain0.imbalance_pct = 117
kernel.sched_domain.cpu0.domain0.max_interval = 4
kernel.sched_domain.cpu0.domain0.max_newidle_lb_cost = 17063
kernel.sched_domain.cpu0.domain0.min_interval = 2
kernel.sched_domain.cpu0.domain0.name = MC
kernel.sched_domain.cpu0.domain0.newidle_idx = 0
kernel.sched_domain.cpu0.domain0.wake_idx = 0
kernel.sched_domain.cpu1.domain0.busy_factor = 32
kernel.sched_domain.cpu1.domain0.busy_idx = 2
kernel.sched_domain.cpu1.domain0.cache_nice_tries = 1
kernel.sched_domain.cpu1.domain0.flags = 559
kernel.sched_domain.cpu1.domain0.forkexec_idx = 0
kernel.sched_domain.cpu1.domain0.idle_idx = 0
kernel.sched_domain.cpu1.domain0.imbalance_pct = 117
kernel.sched_domain.cpu1.domain0.max_interval = 4
kernel.sched_domain.cpu1.domain0.max_newidle_lb_cost = 1898
kernel.sched_domain.cpu1.domain0.min_interval = 2
kernel.sched_domain.cpu1.domain0.name = MC
kernel.sched_domain.cpu1.domain0.newidle_idx = 0
kernel.sched_domain.cpu1.domain0.wake_idx = 0
kernel.sched_latency_ns = 12000000
kernel.sched_migration_cost_ns = 500000
kernel.sched_min_granularity_ns = 10000000
kernel.sched_nr_migrate = 32
kernel.sched_rr_timeslice_ms = 100
kernel.sched_rt_period_us = 1000000
kernel.sched_rt_runtime_us = 950000
kernel.sched_schedstats = 0
kernel.sched_shares_window_ns = 10000000
kernel.sched_time_avg_ms = 1000
kernel.sched_tunable_scaling = 1
kernel.sched_wakeup_granularity_ns = 15000000
kernel.sem = 250 32000 32 128
kernel.sem_next_id = -1
kernel.shm_next_id = -1
kernel.shm_rmid_forced = 0
kernel.shmall = 18446744073692774399
kernel.shmmax = 18446744073692774399
kernel.shmmni = 4096
kernel.softlockup_all_cpu_backtrace = 0
kernel.softlockup_panic = 0
kernel.stack_tracer_enabled = 0
kernel.sysctl_writes_strict = 1
kernel.sysrq = 16
kernel.tainted = 0
kernel.threads-max = 15691
kernel.timer_migration = 1
kernel.traceoff_on_warning = 0
kernel.unknown_nmi_panic = 0
kernel.usermodehelper.bset = 4294967295 31
kernel.usermodehelper.inheritable = 4294967295 31
kernel.version = #1 SMP Fri Apr 20 16:44:24 UTC 2018
kernel.watchdog = 1
kernel.watchdog_cpumask = 0-127
kernel.watchdog_thresh = 10
kernel.yama.ptrace_scope = 0
net.core.bpf_jit_enable = 0
net.core.busy_poll = 0
net.core.busy_read = 0
net.core.default_qdisc = pfifo_fast
net.core.dev_weight = 64
net.core.dev_weight_rx_bias = 1
net.core.dev_weight_tx_bias = 1
net.core.message_burst = 10
net.core.message_cost = 5
net.core.netdev_budget = 300
net.core.netdev_max_backlog = 1000 #网络设备监听队列的最大长度（此值决定了全局并发能力，但不可大过65535，建议值10000）
net.core.netdev_rss_key = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
net.core.netdev_tstamp_prequeue = 1 #网络设备预置队列序号，意味着从指定值开始顺延序列化
net.core.optmem_max = 20480 #每个套接字所允许的最大缓冲区的大小
net.core.rmem_default = 212992 #网络协议栈默认接收内存
net.core.rmem_max = 212992 #网络协议栈最大接收内存
net.core.rps_sock_flow_entries = 0
net.core.somaxconn = 128 #定义了系统中每一个端口最大的监听队列长度，这是个全局的参数 建议值1280
net.core.warnings = 1
net.core.wmem_default = 212992 #网络协议栈默认发送内存
net.core.wmem_max = 212992 #网络协议栈最大发送内存
net.core.xfrm_acq_expires = 30
net.core.xfrm_aevent_etime = 10
net.core.xfrm_aevent_rseqth = 2
net.core.xfrm_larval_drop = 1
net.ipv4.cipso_cache_bucket_size = 10
net.ipv4.cipso_cache_enable = 1
net.ipv4.cipso_rbm_optfmt = 0
net.ipv4.cipso_rbm_strictvalid = 1
net.ipv4.conf.all.accept_local = 0 #是否允许所有接口接收从本机IP地址上发送给本机的数据包
net.ipv4.conf.all.accept_redirects = 1 #是否接收重写过的数据包（用作路由器时默认值为0）
net.ipv4.conf.all.accept_source_route = 0 #是否接收无源路由的数据包
net.ipv4.conf.all.arp_accept = 0 #默认对不在ARP表中的IP地址发出的APR包的处理方式:0不在ARP表中创建对应IP地址的表项;1在ARP表中创建对应IP地址的表项
net.ipv4.conf.all.arp_announce = 0 #对网络接口上，本地IP地址的发出的，ARP回应，作出相应级别的限制: 确定不同程度的限制,宣布对来自本地源IP地址发出Arp请求的接口
#0： 在任意网络接口（eth0,eth1，lo）上的任何本地地址
#1：尽量避免不在该网络接口子网段的本地地址做出arp回应. 当发起ARP请求的源IP地址是被设置应该经由路由达到此网络接口的时候很有用.此时会检查来访IP是否为所有接口上的子网段内ip之一.如果改来访IP不属于各个网络接口上的子网段内,那么将采用级别2的方式来进行处理. 
#2：对查询目标使用最适当的本地地址.在此模式下将忽略这个IP数据包的源地址并尝试选择与能与该地址通信的本地地址.首要是选择所有的网络接口的子网中外出访问子网中包含该目标IP地址的本地地址. 如果没有合适的地址被发现,将选择当前的发送网络接口或其他的有可能接受到该ARP回应的网络接口来进行发送.
net.ipv4.conf.all.arp_filter = 0 # 0：内核设置每个网络接口各自应答其地址上的arp询问。这项看似会错误的设置却经常能非常有效，因为它增加了成功通讯的机会。在Linux主机上，每个IP地址是网络接口独立的，而非一个复合的接口。只有在一些特殊的设置的时候，比如负载均衡的时候会带来麻烦
#1：允许多个网络介质位于同一子网段内，每个网络界面依据是否内核指派路由该数据包经过此接口来确认是否回答ARP查询(这个实现是由来源地址确定路由的时候决定的),换句话说，允许控制使用某一块网卡（通常是第一块）回应arp询问
net.ipv4.conf.all.arp_ignore = 0 #定义对目标地址为本地IP的ARP询问不同的应答模式（LVS负载均衡时此值需要修改为2）
#0：回应任何网络接口上对任何本地IP地址的arp查询请求
#1：只回答目标IP地址是来访网络接口本地地址的ARP查询请求
#2：只回答目标IP地址是来访网络接口本地地址的ARP查询请求,且来访IP必须在该网络接口的子网段内
#3：不回应该网络界面的arp请求，而只对设置的唯一和连接地址做出回应
#8：不回应所有（本地地址）的arp查询
net.ipv4.conf.all.arp_notify = 0 #是否开启arp通知链操作：0不做任何操作，1当设备或硬件地址改变时自动产生一个arp请求
net.ipv4.conf.all.bootp_relay = 0 #是否接收源地址为0.a.b.c，目的地址不是本机的数据包，是为了支持bootp服务
net.ipv4.conf.all.disable_policy = 0 #是否禁止internet协议安全性验证
net.ipv4.conf.all.disable_xfrm = 0 #是否禁止internet协议安全性加密
net.ipv4.conf.all.force_igmp_version = 0
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.all.log_martians = 0 #是否开启并记录欺骗，源路由和重定向数据包:记录带有不允许的地址的数据报到内核日志中（如果是路由器建议值为1）
net.ipv4.conf.all.mc_forwarding = 0 #是否进行多播路由（只有内核编译有CONFIG_MROUTE并且有路由服务程序在运行该参数才有效）
net.ipv4.conf.all.medium_id = 0 #用来区分不同媒介.两个网络设备可以使用不同的值,使他们只有其中之一接收到广播包.通常,这个参数被用来配合proxy_arp实现roxy_arp的特性即是允许arp报文在两个不同的网络介质中转发.
#0：表示各个网络介质接受他们自己介质上的媒介
#-1：表示该媒介未知
net.ipv4.conf.all.promote_secondaries = 1 #主备IP地址切换控制机制（建议值1）0当接口的主IP地址被移除时，删除所有次IP地址；1当接口的主IP地址被移除时，将次IP地址提升为主IP地址
net.ipv4.conf.all.proxy_arp = 0 #是否启用arp代理功能
net.ipv4.conf.all.proxy_arp_pvlan = 0 #回应代理ARP的数据包从接收到此代理ARP请求的网络接口出去
net.ipv4.conf.all.route_localnet = 0 #是否允许外部访问localhost
net.ipv4.conf.all.rp_filter = 1 #是否开启反向路径过滤
net.ipv4.conf.all.secure_redirects = 1 #是否支持安全重定向数据包
net.ipv4.conf.all.send_redirects = 1 #是否发送重定向数据包
net.ipv4.conf.all.shared_media = 1 #发送或接收RFC1620 共享媒体重定向 会覆盖ip_secure_redirects的值
net.ipv4.conf.all.src_valid_mark = 0 #是否为所有接口上源地址有效的数据包打标记
net.ipv4.conf.all.tag = 0
net.ipv4.conf.default.accept_local = 0 #默认是否允许接收从本机IP地址上发送给本机的数据包
net.ipv4.conf.default.accept_redirects = 1 #默认是否接收重写过的数据包（建议值1）
net.ipv4.conf.default.accept_source_route = 0 #默认是否接收无源路由的数据包
net.ipv4.conf.default.arp_accept = 0
net.ipv4.conf.default.arp_announce = 0
net.ipv4.conf.default.arp_filter = 0
net.ipv4.conf.default.arp_ignore = 0 #LVS负载均衡需要修改此值为1
net.ipv4.conf.default.arp_notify = 0
net.ipv4.conf.default.bootp_relay = 0
net.ipv4.conf.default.disable_policy = 0
net.ipv4.conf.default.disable_xfrm = 0
net.ipv4.conf.default.force_igmp_version = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.default.log_martians = 0 #默认是否开启并记录欺骗，源路由和重定向数据包（如果是路由器建议值为1）
net.ipv4.conf.default.mc_forwarding = 0
net.ipv4.conf.default.medium_id = 0
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.conf.default.proxy_arp_pvlan = 0
net.ipv4.conf.default.route_localnet = 0
net.ipv4.conf.default.rp_filter = 1 #默认是否开启反向路径过滤
net.ipv4.conf.default.secure_redirects = 1 #默认是否支持安全重定向数据包
net.ipv4.conf.default.send_redirects = 1 #默认是否发送重定向数据包
net.ipv4.conf.default.shared_media = 1
net.ipv4.conf.default.src_valid_mark = 0 #默认是否为源地址有效的数据包打标记
net.ipv4.conf.default.tag = 0
net.ipv4.conf.eth0.accept_local = 0
net.ipv4.conf.eth0.accept_redirects = 1
net.ipv4.conf.eth0.accept_source_route = 0
net.ipv4.conf.eth0.arp_accept = 0
net.ipv4.conf.eth0.arp_announce = 0
net.ipv4.conf.eth0.arp_filter = 0
net.ipv4.conf.eth0.arp_ignore = 0
net.ipv4.conf.eth0.arp_notify = 0
net.ipv4.conf.eth0.bootp_relay = 0
net.ipv4.conf.eth0.disable_policy = 0
net.ipv4.conf.eth0.disable_xfrm = 0
net.ipv4.conf.eth0.force_igmp_version = 0
net.ipv4.conf.eth0.forwarding = 0
net.ipv4.conf.eth0.log_martians = 0
net.ipv4.conf.eth0.mc_forwarding = 0
net.ipv4.conf.eth0.medium_id = 0
net.ipv4.conf.eth0.promote_secondaries = 1
net.ipv4.conf.eth0.proxy_arp = 0
net.ipv4.conf.eth0.proxy_arp_pvlan = 0
net.ipv4.conf.eth0.route_localnet = 0
net.ipv4.conf.eth0.rp_filter = 1
net.ipv4.conf.eth0.secure_redirects = 1
net.ipv4.conf.eth0.send_redirects = 1
net.ipv4.conf.eth0.shared_media = 1
net.ipv4.conf.eth0.src_valid_mark = 0
net.ipv4.conf.eth0.tag = 0
net.ipv4.conf.lo.accept_local = 0
net.ipv4.conf.lo.accept_redirects = 1
net.ipv4.conf.lo.accept_source_route = 1
net.ipv4.conf.lo.arp_accept = 0
net.ipv4.conf.lo.arp_announce = 0
net.ipv4.conf.lo.arp_filter = 0
net.ipv4.conf.lo.arp_ignore = 0
net.ipv4.conf.lo.arp_notify = 0
net.ipv4.conf.lo.bootp_relay = 0
net.ipv4.conf.lo.disable_policy = 1
net.ipv4.conf.lo.disable_xfrm = 1
net.ipv4.conf.lo.force_igmp_version = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv4.conf.lo.log_martians = 0
net.ipv4.conf.lo.mc_forwarding = 0
net.ipv4.conf.lo.medium_id = 0
net.ipv4.conf.lo.promote_secondaries = 0
net.ipv4.conf.lo.proxy_arp = 0
net.ipv4.conf.lo.proxy_arp_pvlan = 0
net.ipv4.conf.lo.route_localnet = 0
net.ipv4.conf.lo.rp_filter = 0
net.ipv4.conf.lo.secure_redirects = 1
net.ipv4.conf.lo.send_redirects = 1
net.ipv4.conf.lo.shared_media = 1
net.ipv4.conf.lo.src_valid_mark = 0
net.ipv4.conf.lo.tag = 0
net.ipv4.fwmark_reflect = 0
net.ipv4.icmp_echo_ignore_all = 0
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_errors_use_inbound_ifaddr = 0
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.ipv4.icmp_msgs_burst = 50
net.ipv4.icmp_msgs_per_sec = 1000
net.ipv4.icmp_ratelimit = 1000
net.ipv4.icmp_ratemask = 6168
net.ipv4.igmp_max_memberships = 20
net.ipv4.igmp_max_msf = 10
net.ipv4.igmp_qrv = 2
net.ipv4.inet_peer_maxttl = 600
net.ipv4.inet_peer_minttl = 120
net.ipv4.inet_peer_threshold = 65664
net.ipv4.ip_default_ttl = 64 #定义数据报的生存周期:最多经过多少路由器后数据将被丢弃
net.ipv4.ip_dynaddr = 0
net.ipv4.ip_early_demux = 1
net.ipv4.ip_forward = 0 #是否启用IP转发（如果做路由需要开启此项）
net.ipv4.ip_forward_use_pmtu = 0 #是否支持巨型帧转发（使用LVS做负载均衡器时建议此值为1）
net.ipv4.ip_local_port_range = 32768 60999 #服务器端可用端口范围（建议值 1024 65535）
net.ipv4.ip_local_reserved_ports = #系统预留端口列表：可以防止并发时占用服务端口
net.ipv4.ip_no_pmtu_disc = 0 #是否关闭路径MTU探测功能
net.ipv4.ip_nonlocal_bind = 0
net.ipv4.ipfrag_high_thresh = 4194304
net.ipv4.ipfrag_low_thresh = 3145728
net.ipv4.ipfrag_max_dist = 64
net.ipv4.ipfrag_secret_interval = 600
net.ipv4.ipfrag_time = 30
net.ipv4.neigh.default.anycast_delay = 100
net.ipv4.neigh.default.app_solicit = 0
net.ipv4.neigh.default.base_reachable_time_ms = 30000
net.ipv4.neigh.default.delay_first_probe_time = 5
net.ipv4.neigh.default.gc_interval = 30
net.ipv4.neigh.default.gc_stale_time = 60
net.ipv4.neigh.default.gc_thresh1 = 128
net.ipv4.neigh.default.gc_thresh2 = 512
net.ipv4.neigh.default.gc_thresh3 = 1024
net.ipv4.neigh.default.locktime = 100
net.ipv4.neigh.default.mcast_solicit = 3
net.ipv4.neigh.default.proxy_delay = 80
net.ipv4.neigh.default.proxy_qlen = 64
net.ipv4.neigh.default.retrans_time_ms = 1000
net.ipv4.neigh.default.ucast_solicit = 3
net.ipv4.neigh.default.unres_qlen = 31
net.ipv4.neigh.default.unres_qlen_bytes = 65536
net.ipv4.neigh.eth0.anycast_delay = 100
net.ipv4.neigh.eth0.app_solicit = 0
net.ipv4.neigh.eth0.base_reachable_time_ms = 30000
net.ipv4.neigh.eth0.delay_first_probe_time = 5
net.ipv4.neigh.eth0.gc_stale_time = 60
net.ipv4.neigh.eth0.locktime = 100
net.ipv4.neigh.eth0.mcast_solicit = 3
net.ipv4.neigh.eth0.proxy_delay = 80
net.ipv4.neigh.eth0.proxy_qlen = 64
net.ipv4.neigh.eth0.retrans_time_ms = 1000
net.ipv4.neigh.eth0.ucast_solicit = 3
net.ipv4.neigh.eth0.unres_qlen = 31
net.ipv4.neigh.eth0.unres_qlen_bytes = 65536
net.ipv4.neigh.lo.anycast_delay = 100
net.ipv4.neigh.lo.app_solicit = 0
net.ipv4.neigh.lo.base_reachable_time_ms = 30