全志A50 mipi屏幕 驱动

最新推荐文章于 2024-07-07 00:05:42 发布
最新推荐文章于 2024-07-07 00:05:42 发布
阅读量2.6k 收藏 10
点赞数
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/dp__mcu/article/details/106915615
版权 
#include "JD9366_BOE7P.h"

#define panel_reset(val) sunxi_lcd_gpio_set_value(sel, 0, val)
#define panel_power_en(val) sunxi_lcd_gpio_set_value(sel, 1, val)
#define Delayms(x) sunxi_lcd_delay_ms(x);
static void LCD_power_on(u32 sel);
static void LCD_power_off(u32 sel);
static void LCD_bl_open(u32 sel);
static void LCD_bl_close(u32 sel);

static void LCD_panel_init(u32 sel);
static void LCD_panel_exit(u32 sel);


static void LCD_cfg_panel_info(panel_extend_para *info)
{
    u32 i = 0, j = 0;
    u32 items;
    u8 lcd_gamma_tbl[][2] = {
        /* {input value, corrected value} */
        {0, 0},
        {15, 15},
        {30, 30},
        {45, 45},
        {60, 60},
        {75, 75},
        {90, 90},
        {105, 105},
        {120, 120},
        {135, 135},
        {150, 150},
        {165, 165},
        {180, 180},
        {195, 195},
        {210, 210},
        {225, 225},
        {240, 240},
        {255, 255},
    };


    u32 lcd_cmap_tbl[2][3][4] = {
        {
            {LCD_CMAP_G0, LCD_CMAP_B1, LCD_CMAP_G2, LCD_CMAP_B3},
            {LCD_CMAP_B0, LCD_CMAP_R1, LCD_CMAP_B2, LCD_CMAP_R3},
            {LCD_CMAP_R0, LCD_CMAP_G1, LCD_CMAP_R2, LCD_CMAP_G3},
        },
        {
            {LCD_CMAP_B3, LCD_CMAP_G2, LCD_CMAP_B1, LCD_CMAP_G0},
            {LCD_CMAP_R3, LCD_CMAP_B2, LCD_CMAP_R1, LCD_CMAP_B0},
            {LCD_CMAP_G3, LCD_CMAP_R2, LCD_CMAP_G1, LCD_CMAP_R0},
        },
    };


    items = sizeof(lcd_gamma_tbl)/2;
    for (i = 0; i < items - 1; i++) {
        u32 num = lcd_gamma_tbl[i+1][0] - lcd_gamma_tbl[i][0];

        for (j = 0; j < num; j++) {
            u32 value = 0;

            value = lcd_gamma_tbl[i][1] + ((lcd_gamma_tbl[i+1][1] - lcd_gamma_tbl[i][1]) * j)/num;
            info->lcd_gamma_tbl[lcd_gamma_tbl[i][0] + j] = (value<<16) + (value<<8) + value;
        }
    }
    info->lcd_gamma_tbl[255] = (lcd_gamma_tbl[items-1][1]<<16)
        + (lcd_gamma_tbl[items-1][1]<<8) + lcd_gamma_tbl[items-1][1];


    memcpy(info->lcd_cmap_tbl, lcd_cmap_tbl, sizeof(lcd_cmap_tbl));

}

static __s32 LCD_open_flow(u32 sel)
{
    /* open lcd power, and delay 50ms */
    LCD_OPEN_FUNC(sel, LCD_power_on, 5);
    /* open lcd power, than delay 200ms */
    LCD_OPEN_FUNC(sel, LCD_panel_init, 40);
    /* open lcd controller, and delay 100ms */
    LCD_OPEN_FUNC(sel, sunxi_lcd_tcon_enable, 40);
    /* open lcd backlight, and delay 0ms */
    LCD_OPEN_FUNC(sel, LCD_bl_open, 0);

    return 0;
}

static __s32 LCD_close_flow(u32 sel)
{
    /* close lcd backlight, and delay 0ms */
    LCD_CLOSE_FUNC(sel, LCD_bl_close, 0);
    /* close lcd controller, and delay 0ms */
    LCD_CLOSE_FUNC(sel, sunxi_lcd_tcon_disable, 0);
    /* open lcd power, than delay 200ms */
    LCD_CLOSE_FUNC(sel, LCD_panel_exit,	20);
    /* cose lcd power, and delay 500ms */
    LCD_CLOSE_FUNC(sel, LCD_power_off, 50);

    return 0;
}

static void LCD_power_on(u32 sel)
{
    sunxi_lcd_pin_cfg(sel, 1);
    panel_power_en(0);
    /* config lcd_power pin to open lcd power0 */
    sunxi_lcd_power_enable(sel, 1);
    sunxi_lcd_delay_ms(5);
    /* config lcd_power pin to open lcd power1 */
    sunxi_lcd_power_enable(sel, 0);
    sunxi_lcd_delay_ms(8);
    panel_power_en(1);
    sunxi_lcd_delay_ms(10);
    panel_reset(1);
    sunxi_lcd_delay_ms(10);
    panel_reset(0);
    sunxi_lcd_delay_ms(20);
    panel_reset(1);
}

static void LCD_power_off(u32 sel)
{
    sunxi_lcd_pin_cfg(sel, 0);
    /* config lcd_power pin to close lcd power1 */
    sunxi_lcd_power_disable(sel, 0);
    /* config lcd_power pin to close lcd power0 */
    sunxi_lcd_power_disable(sel, 1);
    /* sunxi_lcd_pwm_disable(sel);//close pwm module */
}

static void LCD_bl_open(u32 sel)
{
    /* open pwm module */
    sunxi_lcd_pwm_enable(sel);
    /* config lcd_bl_en pin to open lcd backlight */
    sunxi_lcd_backlight_enable(sel);
}

static void LCD_bl_close(u32 sel)
{
    /* config lcd_bl_en pin to close lcd backlight */
    sunxi_lcd_backlight_disable(sel);
    /* close pwm module */
    sunxi_lcd_pwm_disable(sel);
}
#if 0

#define REGFLAG_DELAY         0XFF
#define REGFLAG_END_OF_TABLE  0xFE   /* END OF REGISTERS MARKER */

struct LCM_setting_table {
    u8 cmd;
    u32 count;
    u8 para_list[64];
};


static struct LCM_setting_table lcm_initialization_setting[] = {
    {0xE0, 1, {0x00} },
    {0xE1, 1, {0x93} },
    {0xE2, 1, {0x65} },
    {0xE3, 1, {0xF8} },
    {0x80, 1, {0x03} },	/* 4Lanes */
    {0xE0, 1, {0x04} },
    {0x2D, 1, {0x03} }, /* 4Lanes */
    {0xE0, 1, {0x01} },
    {0x00, 1, {0x00} },
    {0x01, 1, {0x6F} },
    {0x03, 1, {0x00} },
    {0x04, 1, {0x6F} },
    {0x17, 1, {0x00} },
    {0x18, 1, {0xD7} }, /* VGMP=4.8V */
    {0x19, 1, {0x05} },
    {0x1A, 1, {0x00} },
    {0x1B, 1, {0xD7} }, /* VGMN=-4.8V */
    {0x1C, 1, {0x05} },
    {0x1F, 1, {0x79} }, /* VGH_REG=18V */
    {0x20, 1, {0x2D} }, /* VGL_REG=-12V */
    {0x21, 1, {0x2D} }, /* VGL_REG2=-12V */
    {0x22, 1, {0x4F} },
    {0x26, 1, {0xF1} }, /* VDDD from IOVCC */
    {0x37, 1, {0x09} }, /* SS=1, 1, {BGR=1 */
    {0x38, 1, {0x04} }, /* JDT=100 column inversion */
    {0x39, 1, {0x08} }, /* RGB_N_EQ1, 1, { modify 20140806 */
    {0x3A, 1, {0x12} }, /* RGB_N_EQ2, 1, { modify 20140806 */
    {0x3C, 1, {0x78} }, /* SET EQ3 for TE_H */
    {0x3E, 1, {0x80} }, /* SET CHGEN_OFF, 1, { modify 20140806 */
    {0x3F, 1, {0x80} }, /* SET CHGEN_OFF2, 1, { modify 20140806 */
    {0x40, 1, {0x06} }, /* RSO=800 RGB */
    {0x41, 1, {0xA0} }, /* LN=640->1280 line */
    {0x55, 1, {0x0F} }, /* DCDCM=1111, 1, { no output */
    {0x56, 1, {0x01} },
    {0x57, 1, {0xA8} }, /*[7:5]VGH_RT, 1, {[4:2]=VGL_RT, 1, {[1:0]=VCL_RT*/
    {0x58, 1, {0x0A} }, /* AVDD_S */
    {0x59, 1, {0x2A} }, /* VCL = -2.7V */
    {0x5A, 1, {0x37} }, /* VGH = 19V */
    {0x5B, 1, {0x19} },/* VGL = -12V */
    {0x5D, 1, {0x70} },
    {0x5E, 1, {0x50} },
    {0x5F, 1, {0x3F} },
    {0x60, 1, {0x31} },
    {0x61, 1, {0x2D} },
    {0x62, 1, {0x1D} },
    {0x63, 1, {0x22} },
    {0x64, 1, {0x0C} },
    {0x65, 1, {0x25} },
    {0x66, 1, {0x24} },
    {0x67, 1, {0x24} },
    {0x68, 1, {0x41} },
    {0x69, 1, {0x2F} },
    {0x6A, 1, {0x36} },
    {0x6B, 1, {0x28} },
    {0x6C, 1, {0x26} },
    {0x6D, 1, {0x1C} },
    {0x6E, 1, {0x08} },
    {0x6F, 1, {0x02} },
    {0x70, 1, {0x70} },
    {0x71, 1, {0x50} },
    {0x72, 1, {0x3F} },
    {0x73, 1, {0x31} },
    {0x74, 1, {0x2D} },
    {0x75, 1, {0x1D} },
    {0x76, 1, {0x22} },
    {0x77, 1, {0x0C} },
    {0x78, 1, {0x25} },
    {0x79, 1, {0x24} },
    {0x7A, 1, {0x24} },
    {0x7B, 1, {0x41} },
    {0x7C, 1, {0x2F} },
    {0x7D, 1, {0x36} },
    {0x7E, 1, {0x28} },
    {0x7F, 1, {0x26} },
    {0x80, 1, {0x1C} },
    {0x81, 1, {0x08} },
    {0x82, 1, {0x02} },
    {0xE0, 1, {0x02} },
    {0x00, 1, {0x00} },
    {0x01, 1, {0x04} },
    {0x02, 1, {0x06} },
    {0x03, 1, {0x08} },
    {0x04, 1, {0x0A} },
    {0x05, 1, {0x0C} },
    {0x06, 1, {0x0E} },
    {0x07, 1, {0x17} },
    {0x08, 1, {0x37} },
    {0x09, 1, {0x1F} },
    {0x0A, 1, {0x10} },
    {0x0B, 1, {0x1F} },
    {0x0C, 1, {0x1F} },
    {0x0D, 1, {0x1F} },
    {0x0E, 1, {0x1F} },
    {0x0F, 1, {0x1F} },
    {0x10, 1, {0x1F} },
    {0x11, 1, {0x1F} },
    {0x12, 1, {0x1F} },
    {0x13, 1, {0x12} },
    {0x14, 1, {0x1F} },
    {0x15, 1, {0x1F} },
    {0x16, 1, {0x01} },
    {0x17, 1, {0x05} },
    {0x18, 1, {0x07} },
    {0x19, 1, {0x09} },
    {0x1A, 1, {0x0B} },
    {0x1B, 1, {0x0D} },
    {0x1C, 1, {0x0F} },
    {0x1D, 1, {0x17} },
    {0x1E, 1, {0x37} },
    {0x1F, 1, {0x1F} },
    {0x20, 1, {0x11} },
    {0x21, 1, {0x1F} },
    {0x22, 1, {0x1F} },
    {0x23, 1, {0x1F} },
    {0x24, 1, {0x1F} },
    {0x25, 1, {0x1F} },
    {0x26, 1, {0x1F} },
    {0x27, 1, {0x1F} },
    {0x28, 1, {0x1F} },
    {0x29, 1, {0x13} },
    {0x2A, 1, {0x1F} },
    {0x2B, 1, {0x1F} },
    {0x2C, 1, {0x11} },
    {0x2D, 1, {0x0F} },
    {0x2E, 1, {0x0D} },
    {0x2F, 1, {0x0B} },
    {0x30, 1, {0x09} },
    {0x31, 1, {0x07} },
    {0x32, 1, {0x05} },
    {0x33, 1, {0x37} },
    {0x34, 1, {0x17} },
    {0x35, 1, {0x1F} },
    {0x36, 1, {0x01} },
    {0x37, 1, {0x1F} },
    {0x38, 1, {0x1F} },
    {0x39, 1, {0x1F} },
    {0x3A, 1, {0x1F} },
    {0x3B, 1, {0x1F} },
    {0x3C, 1, {0x1F} },
    {0x3D, 1, {0x1F} },
    {0x3E, 1, {0x1F} },
    {0x3F, 1, {0x13} },
    {0x40, 1, {0x1F} },
    {0x41, 1, {0x1F} },
    {0x42, 1, {0x10} },
    {0x43, 1, {0x0E} },
    {0x44, 1, {0x0C} },
    {0x45, 1, {0x0A} },
    {0x46, 1, {0x08} },
    {0x47, 1, {0x06} },
    {0x48, 1, {0x04} },
    {0x49, 1, {0x37} },
    {0x4A, 1, {0x17} },
    {0x4B, 1, {0x1F} },
    {0x4C, 1, {0x00} },
    {0x4D, 1, {0x1F} },
    {0x4E, 1, {0x1F} },
    {0x4F, 1, {0x1F} },
    {0x50, 1, {0x1F} },
    {0x51, 1, {0x1F} },
    {0x52, 1, {0x1F} },
    {0x53, 1, {0x1F} },
    {0x54, 1, {0x1F} },
    {0x55, 1, {0x12} },
    {0x56, 1, {0x1F} },
    {0x57, 1, {0x1F} },
    {0x58, 1, {0x10} },
    {0x59, 1, {0x00} },
    {0x5A, 1, {0x00} },
    {0x5B, 1, {0x10} },
    {0x5C, 1, {0x07} },
    {0x5D, 1, {0x30} },
    {0x5E, 1, {0x00} },
    {0x5F, 1, {0x00} },
    {0x60, 1, {0x30} },
    {0x61, 1, {0x03} },
    {0x62, 1, {0x04} },
    {0x63, 1, {0x03} },
    {0x64, 1, {0x6A} }, /* SETV_OFF, 1, { modify 20140806 */
    {0x65, 1, {0x75} },
    {0x66, 1, {0x0D} },
    {0x67, 1, {0xB3} },
    {0x68, 1, {0x09} },
    {0x69, 1, {0x06} },
    {0x6A, 1, {0x6A} }, /* CKV_OFF, 1, { modify 20140806 */
    {0x6B, 1, {0x04} },
    {0x6C, 1, {0x00} },
    {0x6D, 1, {0x04} },
    {0x6E, 1, {0x04} },
    {0x6F, 1, {0x88} },
    {0x70, 1, {0x00} },
    {0x71, 1, {0x00} },
    {0x72, 1, {0x06} },
    {0x73, 1, {0x7B} },
    {0x74, 1, {0x00} },
    {0x75, 1, {0xBC} },
    {0x76, 1, {0x00} },
    {0x77, 1, {0x0D} },
    {0x78, 1, {0x2C} },
    {0x79, 1, {0x00} },
    {0x7A, 1, {0x00} },
    {0x7B, 1, {0x00} },
    {0x7C, 1, {0x00} },
    {0x7D, 1, {0x03} },
    {0x7E, 1, {0x7B} },
    {0xE0, 1, {0x04} },
    {0x2B, 1, {0x2B} },
    {0x2E, 1, {0x44} },
    {0xE0, 1, {0x00} },
    {0xE6, 1, {0x02} },	/* Watch dog */
    {0xE7, 1, {0x02} },	/* Watch dog */
    {0x11, 1, {0x00} }, /* SLPOUT */
    {REGFLAG_DELAY, 120, {} },
    {0x29, 1, {0x00} }, /* DSPON */
    {REGFLAG_DELAY, 5, {} },
    {REGFLAG_END_OF_TABLE, 0x00, {} }
};
#endif

#define SSD_Single(cmd, val) dsi_dcs_wr_1para(0, cmd, val)
#define SSD_CMD(cmd) dsi_dcs_wr_0para(0, cmd)

static void jd9366_init(void) {

    //JD9365 initial code

    printf("%s\n", __func__);
    //====== JD9366+ BP070WX3-300 =========//




    //Page0
    SSD_Single(0xE0, 0x00);

    //--- PASSWORD  ----//
    SSD_Single(0xE1, 0x93);
    SSD_Single(0xE2, 0x65);
    SSD_Single(0xE3, 0xF8);
    SSD_Single(0x80, 0x03);

    //--- Page4  ----//
    SSD_Single(0xE0, 0x04);
    SSD_Single(0x2D, 0x03);

    //--- Page1  ----//
    SSD_Single(0xE0, 0x01);

    //Set VCOM
    SSD_Single(0x00, 0x00);
    SSD_Single(0x01, 0xA9);	//VCOM A8 AE AD
    //Set VCOM_Reverse
    SSD_Single(0x03, 0x00);
    SSD_Single(0x04, 0xA8);	

    //Set Gamma Power,  VGMP, VGMN, VGSP, VGSN
    SSD_Single(0x17, 0x00);
    SSD_Single(0x18, 0xB1);
    SSD_Single(0x19, 0x01);
    SSD_Single(0x1A, 0x00);
    SSD_Single(0x1B, 0xB1);  //VGMN=0
    SSD_Single(0x1C, 0x01);

    //Set Gate Power
    SSD_Single(0x1F, 0x3E);     //VGH_R  = 15V                       
    SSD_Single(0x20, 0x2D);     //VGL_R  = -12V                      
    SSD_Single(0x21, 0x2D);     //VGL_R2 = -12V                      
    SSD_Single(0x22, 0x7E);     //PA[6]=0,  PA[5]=0,  PA[4]=0,  PA[0]=0 

    //SETPANEL
    SSD_Single(0x37, 0x19);	//SS=1, BGR=1

    //SET RGBCYC
    SSD_Single(0x38, 0x05);	//JDT=101 zigzag inversion
    SSD_Single(0x39, 0x00);	//RGB_N_EQ1,  modify 20140806
    SSD_Single(0x3A, 0x01);	//RGB_N_EQ2,  modify 20140806
    SSD_Single(0x3C, 0x78);	//SET EQ3 for TE_H
    SSD_Single(0x3D, 0xFF);	//SET CHGEN_OFF,  modify 20140827 
    SSD_Single(0x3E, 0xFF);	//SET CHGEN_OFF,  modify 20140827 
    SSD_Single(0x3F, 0xFF);	//SET CHGEN_OFF2,  modify 20140827
    //SSD_Single(0x3E, 0x80);	//SET CHGEN_OFF,  modify 20140806 
    //SSD_Single(0x3F, 0x80);	//SET CHGEN_OFF2,  modify 20140806


    //Set TCON
    SSD_Single(0x40, 0x06);	//RSO=800 RGB
    SSD_Single(0x41, 0xA0);	//LN=640->1280 line

    SSD_Single(0x43, 0x08);
    SSD_Single(0x44, 0x09);
    SSD_Single(0x45, 0x28);

    //--- power voltage  ----//
    SSD_Single(0x55, 0x0F);	//DCDCM=1111
    //SSD_Single(0x56, 0x01);
    SSD_Single(0x57, 0x89);	//VGH_RT=100,  Charge pump Ratio:3*AVDD-VCL
    SSD_Single(0x58, 0x0A);
    SSD_Single(0x59, 0x0A);	//VCL = -2.5V
    SSD_Single(0x5A, 0x28);	//VGH = 15V
    SSD_Single(0x5B, 0x19);	//VGL = -12V



    //--- Gamma  ----//
    SSD_Single(0x5D, 0x7C); // 
    SSD_Single(0x5E, 0x66); //
    SSD_Single(0x5F, 0x56); //
    SSD_Single(0x60, 0x49); //
    SSD_Single(0x61, 0x44); //
    SSD_Single(0x62, 0x34); //
    SSD_Single(0x63, 0x37); //
    SSD_Single(0x64, 0x1F); //
    SSD_Single(0x65, 0x36); //
    SSD_Single(0x66, 0x33); //
    SSD_Single(0x67, 0x32); //
    SSD_Single(0x68, 0x4F); //
    SSD_Single(0x69, 0x3D); //
    SSD_Single(0x6A, 0x43); //
    SSD_Single(0x6B, 0x35); //
    SSD_Single(0x6C, 0x30); //
    SSD_Single(0x6D, 0x24); //
    SSD_Single(0x6E, 0x13); //
    SSD_Single(0x6F, 0x00); //
    SSD_Single(0x70, 0x7C); //
    SSD_Single(0x71, 0x66); //
    SSD_Single(0x72, 0x56); //
    SSD_Single(0x73, 0x49); //
    SSD_Single(0x74, 0x44); //
    SSD_Single(0x75, 0x34); //
    SSD_Single(0x76, 0x37); //
    SSD_Single(0x77, 0x1F); //
    SSD_Single(0x78, 0x36); //
    SSD_Single(0x79, 0x33); //
    SSD_Single(0x7A, 0x32); //
    SSD_Single(0x7B, 0x4F); //
    SSD_Single(0x7C, 0x3D); //
    SSD_Single(0x7D, 0x43); //
    SSD_Single(0x7E, 0x35); //
    SSD_Single(0x7F, 0x30); //
    SSD_Single(0x80, 0x24); //
    SSD_Single(0x81, 0x13); //
    SSD_Single(0x82, 0x00); //


    //Page2,  for GIP
    SSD_Single(0xE0, 0x02);

    //GIP_L Pin mapping
    SSD_Single(0x00, 0x45);//0x05
    SSD_Single(0x01, 0x45);//0x05  
    SSD_Single(0x02, 0x44);//0x04
    SSD_Single(0x03, 0x44);//0x04
    SSD_Single(0x04, 0x47);//0x07
    SSD_Single(0x05, 0x47);//0x07
    SSD_Single(0x06, 0x46);//0x06
    SSD_Single(0x07, 0x46);//0x06
    SSD_Single(0x08, 0x40);//0x00
    SSD_Single(0x09, 0x1F);//0x1F
    SSD_Single(0x0A, 0x1F);//0x1F
    SSD_Single(0x0B, 0x1F);//0x1F
    SSD_Single(0x0C, 0x1F);//0x1F
    SSD_Single(0x0D, 0x1F);//0x1F
    SSD_Single(0x0E, 0x1F);//0x1F
    SSD_Single(0x0F, 0x41);//0x01
    SSD_Single(0x10, 0x1F);//0x1F
    SSD_Single(0x11, 0x1F);//0x1F
    SSD_Single(0x12, 0x1F);//0x1F
    SSD_Single(0x13, 0x1F);//0x1F
    SSD_Single(0x14, 0x1F);//0x1F
    SSD_Single(0x15, 0x1F);//0x1F

    //GIP_R Pin mapping
    SSD_Single(0x16, 0x45);
    SSD_Single(0x17, 0x45);
    SSD_Single(0x18, 0x44);
    SSD_Single(0x19, 0x44);
    SSD_Single(0x1A, 0x47);
    SSD_Single(0x1B, 0x47);
    SSD_Single(0x1C, 0x46);
    SSD_Single(0x1D, 0x46);
    SSD_Single(0x1E, 0x40);
    SSD_Single(0x1F, 0x1F);
    SSD_Single(0x20, 0x1F);
    SSD_Single(0x21, 0x1F);
    SSD_Single(0x22, 0x1F);
    SSD_Single(0x23, 0x1F);
    SSD_Single(0x24, 0x1F);
    SSD_Single(0x25, 0x41);
    SSD_Single(0x26, 0x1F);
    SSD_Single(0x27, 0x1F);
    SSD_Single(0x28, 0x1F);
    SSD_Single(0x29, 0x1F);
    SSD_Single(0x2A, 0x1F);
    SSD_Single(0x2B, 0x1F);



    //GIP Timing  
    SSD_Single(0x58, 0x40);        // TGEQL,  Initial porch
    //SSD_Single(0x59, 0x00);
    //SSD_Single(0x5A, 0x00);
    SSD_Single(0x5B, 0x10);       //STV number =4,  STV_S0[10:8]
    SSD_Single(0x5C, 0x06);       //STV_S0[7:0] =
    SSD_Single(0x5D, 0x20);//60   //STV_W=4 ,  STV_S1=0, 1h timing
    SSD_Single(0x5E, 0x01);       //STV_S2 =1, 1h timing
    SSD_Single(0x5F, 0x02);       //STV_S3 =2, 1h timing
    //SSD_Single(0x60, 0x00);     //ETV default
    //SSD_Single(0x61, 0x01);     //ETV default
    //SSD_Single(0x62, 0x02);     //ETV default
    SSD_Single(0x63, 0x62);       //SETV_ON
    SSD_Single(0x64, 0x62);       //SETV_OFF
    //SSD_Single(0x65, 0x00);    //ETV
    //SSD_Single(0x66, 0x00);    //ETV
    SSD_Single(0x67, 0x32);          //CKV0_NUM[3:0]=8,  CKV0_W[3:0]=4
    SSD_Single(0x68, 0x08);   //0x06       
    SSD_Single(0x69, 0x62); 
    SSD_Single(0x6A, 0x66); //66 CLK Falling to Source Falling time 3us
    SSD_Single(0x6B, 0x08);  
    SSD_Single(0x6C, 0x00);
    SSD_Single(0x6D, 0x04); //GEQ_GGND1
    SSD_Single(0x6E, 0x04); //GEQ_GGND2
    SSD_Single(0x6F, 0x88);

    //SSD_Single(0x70, 0x00);
    //SSD_Single(0x71, 0x00);
    //SSD_Single(0x72, 0x06);
    //SSD_Single(0x73, 0x7B);
    //SSD_Single(0x74, 0x00);
    //SSD_Single(0x75, 0x07);
    //SSD_Single(0x76, 0x00);
    //SSD_Single(0x77, 0x5D);
    //SSD_Single(0x78, 0x17);
    //SSD_Single(0x79, 0x1F);
    //SSD_Single(0x7A, 0x00);
    //SSD_Single(0x7B, 0x00);
    //SSD_Single(0x7C, 0x00);
    //SSD_Single(0x7D, 0x03);
    //SSD_Single(0x7E, 0x7B);




    //Page3
    SSD_Single(0xE0, 0x03);
    SSD_Single(0x98, 0x3E);	//From 2E to 3E,  LED_ON


    //Page4
    SSD_Single(0xE0, 0x04);  //ESD protect
    SSD_Single(0x09, 0x10);
    SSD_Single(0x2B, 0x2B);	
    SSD_Single(0x2D, 0x03);	
    SSD_Single(0x2E, 0x44);	


    //Page0
    SSD_Single(0xE0, 0x00); //Watch dog
    SSD_Single(0xE6, 0x02);
    SSD_Single(0xE7, 0x06);

    //SLP OUT

    SSD_CMD(0x11);  	// SLPOUT
    sunxi_lcd_delay_ms(120);


    //DISP ON

    SSD_CMD(0x29);  	// DSPON
    sunxi_lcd_delay_ms(5);
}

static void LCD_panel_init(u32 sel)
{
#if 0
    u32 i;

    for (i = 0; ; i++) {
        if (lcm_initialization_setting[i].cmd == REGFLAG_END_OF_TABLE)
            break;
        else if (lcm_initialization_setting[i].cmd == REGFLAG_DELAY)
            sunxi_lcd_delay_ms(lcm_initialization_setting[i].count);
        else {
#ifdef SUPPORT_DSI
            dsi_dcs_wr(0, lcm_initialization_setting[i].cmd,
                    lcm_initialization_setting[i].para_list,
                    lcm_initialization_setting[i].count);
#endif
        }
    }
#endif
    jd9366_init();
    /* Begin to translate data */
    sunxi_lcd_dsi_clk_enable(sel);

    return;
}

static void LCD_panel_exit(u32 sel)
{
    sunxi_lcd_dsi_clk_disable(sel);
    /* panel_reset(0); */
    return;
}

/* sel: 0:lcd0; 1:lcd1 */
static __s32 LCD_user_defined_func(u32 sel, u32 para1, u32 para2, u32 para3)
{
    return 0;
}

__lcd_panel_t JD9366_BOE7P_panel = {
    /* panel driver name, must mach the name of lcd_drv_name in sys_config.fex */
    .name = "JD9366_BOE7P",
    .func = {
        .cfg_panel_info = LCD_cfg_panel_info,
        .cfg_open_flow = LCD_open_flow,
        .cfg_close_flow = LCD_close_flow,
        .lcd_user_defined_func = LCD_user_defined_func,
    },
};

 

 

 

 


;----------------------------------------------------------------------------------
;disp init configuration
;
;disp_mode            (0:screen0<screen0,fb0>)
;screenx_output_type  (0:none; 1:lcd; 3:hdmi;)
;screenx_output_mode  (used for hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50)
;                     (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60)
;fbx format           (4:RGB655 5:RGB565 6:RGB556 7:ARGB1555 8:RGBA5551 9:RGB888 10:ARGB8888 12:ARGB4444)
;fbx pixel sequence   (0:ARGB 1:BGRA 2:ABGR 3:RGBA)
;fbx_width,fbx_height (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
;lcdx_backlight       (lcd init backlight,the range:[0,256],default:197
;lcdx_yy              (lcd init screen bright/contrast/saturation/hue, value:0~100, default:50/50/57/50)
;----------------------------------------------------------------------------------
[disp]
disp_init_enable         = 1
disp_mode                = 0

screen0_output_type      = 1
screen0_output_mode      = 4

screen1_output_type      = 1
screen1_output_mode      = 4

fb0_format               = 0
fb0_width                = 0
fb0_height               = 0

fb1_format               = 0
fb1_width                = 0
fb1_height               = 0

lcd0_backlight           = 50
lcd1_backlight           = 50

lcd0_bright              = 50
lcd0_contrast            = 50
lcd0_saturation          = 57
lcd0_hue                 = 50

lcd1_bright              = 50
lcd1_contrast            = 50
lcd1_saturation          = 57
lcd1_hue                 = 50

;----------------------------------------------------------------------------------
;lcd0 configuration

;lcd_if:               0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp; 6:extend dsi
;lcd_x:                lcd horizontal resolution
;lcd_y:                lcd vertical resolution
;lcd_width:            width of lcd in mm
;lcd_height:           height of lcd in mm
;lcd_dclk_freq:        in MHZ unit
;lcd_pwm_freq:         in HZ unit
;lcd_pwm_pol:          lcd backlight PWM polarity
;lcd_pwm_max_limit     lcd backlight PWM max limit(<=255)
;lcd_hbp:              hsync back porch
;lcd_ht:               hsync total cycle
;lcd_vbp:              vsync back porch
;lcd_vt:               vysnc total cycle
;lcd_hspw:             hsync plus width
;lcd_vspw:             vysnc plus width
;lcd_lvds_if:          0:single link;  1:dual link
;lcd_lvds_colordepth:  0:8bit; 1:6bit
;lcd_lvds_mode:        0:NS mode; 1:JEIDA mode
;lcd_frm:              0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
;lcd_io_phase:         0:noraml; 1:intert phase(0~3bit: vsync phase; 4~7bit:hsync phase;
;                      8~11bit:dclk phase; 12~15bit:de phase)
;lcd_gamma_en          lcd gamma correction enable
;lcd_bright_curve_en   lcd bright curve correction enable
;lcd_cmap_en           lcd color map function enable
;deu_mode              0:smoll lcd screen; 1:large lcd screen(larger than 10inch)
;lcdgamma4iep:         Smart Backlight parameter, lcd gamma vale * 10;
;                      decrease it while lcd is not bright enough; increase while lcd is too bright
;smart_color           90:normal lcd screen 65:retina lcd screen(9.7inch)
;----------------------------------------------------------------------------------
[lcd0]
lcd_used            = 1

lcd_driver_name     = "JD9366_BOE7P"
;lcd_driver_name     = "fx070"
lcd_backlight       = 50
lcd_if              = 4
lcd_x               = 800
lcd_y               = 1280
lcd_width           = 108
lcd_height          = 172
lcd_dclk_freq       = 76

lcd_pwm_used        = 1
lcd_pwm_ch          = 0
lcd_pwm_freq        = 10000
lcd_pwm_pol         = 1
lcd_pwm_max_limit   = 255

lcd_hbp             = 50
lcd_ht              = 900
lcd_hspw            = 25
lcd_vbp             = 10
lcd_vt              = 1340 
lcd_vspw            = 2

lcd_lvds_if         = 0
lcd_lvds_colordepth = 0
lcd_lvds_mode       = 0
lcd_frm             = 1
lcd_hv_clk_phase    = 0
lcd_hv_sync_polarity= 0

lcd_dsi_if          = 0
lcd_dsi_lane        = 4
lcd_dsi_format      = 0
lcd_dsi_te          = 0

lcd_gamma_en        = 0
lcd_bright_curve_en = 0
lcd_cmap_en         = 0
lcd_bl_en           = port:PB08<1><0><default><1>

deu_mode            = 0
lcdgamma4iep        = 22
smart_color         = 90
;reset
lcd_gpio_0          = port:PD22<1><0><default><1>
;power enable
;lcd_gpio_1          = port:PB07<1><0><default><1>

lcd_power     = "vcc-mipi"
lcd_power1    = "vcc-lcd"  
lcd_pin_power = "vcc-dsi"
lcdd2               = port:PD00<2><0><default><default>
lcdd3               = port:PD01<2><0><default><default>
lcdd4               = port:PD02<2><0><default><default>
lcdd5               = port:PD03<2><0><default><default>
lcdd6               = port:PD04<2><0><default><default>
lcdd7               = port:PD05<2><0><default><default>
lcdd10              = port:PD06<2><0><default><default>
lcdd11              = port:PD07<2><0><default><default>
lcdd12              = port:PD08<2><0><default><default>
lcdd13              = port:PD09<2><0><default><default>
lcdd14              = port:PD10<2><0><default><default>
lcdd15              = port:PD11<2><0><default><default>
lcdd18              = port:PD12<2><0><default><default>
lcdd19              = port:PD13<2><0><default><default>
lcdd20              = port:PD14<2><0><default><default>
lcdd21              = port:PD15<2><0><default><default>
lcdd22              = port:PD16<2><0><default><default>
lcdd23              = port:PD17<2><0><default><default>
lcdclk              = port:PD18<2><0><default><default>
lcdde               = port:PD19<2><0><default><default>
lcdhsync            = port:PD20<2><0><default><default>
lcdvsync            = port:PD21<2><0><default><default>

[lcd0_suspend]
lcdd2               = port:PD00<7><0><default><default>
lcdd3               = port:PD01<7><0><default><default>
lcdd4               = port:PD02<7><0><default><default>
lcdd5               = port:PD03<7><0><default><default>
lcdd6               = port:PD04<7><0><default><default>
lcdd7               = port:PD05<7><0><default><default>
lcdd10              = port:PD06<7><0><default><default>
lcdd11              = port:PD07<7><0><default><default>
lcdd12              = port:PD08<7><0><default><default>
lcdd13              = port:PD09<7><0><default><default>
lcdd14              = port:PD10<7><0><default><default>
lcdd15              = port:PD11<7><0><default><default>
lcdd18              = port:PD12<7><0><default><default>
lcdd19              = port:PD13<7><0><default><default>
lcdd20              = port:PD14<7><0><default><default>
lcdd21              = port:PD15<7><0><default><default>
lcdd22              = port:PD16<7><0><default><default>
lcdd23              = port:PD17<7><0><default><default>
lcdclk              = port:PD18<7><0><default><default>
lcdde               = port:PD19<7><0><default><default>
lcdhsync            = port:PD20<7><0><default><default>
lcdvsync            = port:PD21<7><0><default><default>
;----------------------------------------------------------------------------------
;hdmi configuration
;----------------------------------------------------------------------------------
[hdmi_para]
hdmi_used           = 0

;----------------------------------------------------------------------------------
;pwm config
;----------------------------------------------------------------------------------
[pwm0]
pwm_used            = 1
pwm_positive        = port:PD23<2><0><default><default>

[pwm0_suspend]
pwm_positive        = port:PD23<7><0><default><default>

[pwm1]
pwm_used            = 0
pwm_positive        = port:PB10<2><0><default><default>

[pwm1_suspend]
pwm_positive        = port:PB10<7><0><default><default>

[spwm0]
s_pwm0_used         = 0
pwm_positive        = port:PL10<2><0><default><default>

[spwm0_suspend]
pwm_positive        = port:PL10<7><0><default><default>

dddddppppp123
关注
全志 mipi屏幕和触摸驱动调试记录
u011996684的博客
08-29 1584
mipi屏幕与触摸调试记录
全志A40i点亮mipi屏幕（Android 7.1 ）
shichang的博客15393701561
04-09 3273
1、准备屏幕数据手册：
全志t113 mipi10.1寸屏幕翻转90度
06-19
全志t113 mipi10.1寸屏幕翻转90度
MIPI屏幕驱动之背光控制
最新发布
superman66410的博客
07-07 889
介绍参考屏幕规格书的背光部分与开发板的背光驱动，完成背光电流配置电阻的计算
D1移植讯为7寸MIPI屏
m0_47789917的博客
01-11 763
D1移植讯为7寸MIPI屏1、修改驱动源码2、修改设备树3、触摸屏驱动配置4、编译打包、测试 1、修改驱动源码 内核源码驱动路径：tina-d1-open/lichee/linux-5.4/drivers/video/fbdev/sunxi/disp2/disp/lcd uboot源码驱动路径：tina-d1-open/lichee/brandy-2.0/u-boot-2018/drivers/video/sunxi/disp2/disp/lcd 显示屏的驱动都放在上面路径下，全志官方提供的显示屏是tft
linux之调试mipi液晶屏
professionalmcu的专栏
12-05 3971
设计了一块嵌入式电路板，运行linux系统，主控CPU为px30，需要适配一块显示驱动IC为ILI9881D的5.0寸液晶屏，分辨率为720*1280。 液晶驱动电路如下： MIPI通道为4lane，pwm调光驱动为负极性（占空比最小亮度最高）。 液晶屏厂家提供了一份初始化代码文件和一份时序参数文件; 参照Rockchip官方参考文档:Rockchip_DRM_Panel_Porting_Guide_V1.3_20171209.pdf-Linux文档类资源-CSDN下载 第二章MIPI-DSI
全志A50/A100 Clone Project
一只徒步鞋
06-30 793
MTK关于克隆工程有好几个FAQ： [FAQ13465]L版本How to clone project [FAQ17707]M版本如何clone project 刚开始接触全志觉得克隆工程好麻烦，没有文档支撑，不知道从何入手，后来才知道全志也做了类似的工作，并且直接写在了/device/softwinner/common/vendorsetup.sh里面： function clone() { if [ $# -ne 0 ]; then echo "don't ente..
全志A50处理器,A50芯片参数说明
szx940213的博客
03-28 7465
全志A50是一款功能强大的处理器，内置四核CorexTMA7CPU，工作频率高达1.8GHz。它还集成了双核马里-400GPU、H.2651080p60fps视频解码器、13MPCamerISP、信任区等。随着平板市场的发展，消费者期待更清晰的显示、更强的多媒体支持、更流畅的用户体验、更长的使用时间、同时安全和经济实惠的COST仍然是基本要求。A50是解决平板电脑和智能显示装置的最新市场趋势的理想...
A50_docs_A50_全志_allwinner
09-11
对于开发者而言，全志A50提供了详细的规格书和datasheet，包括硬件接口定义、软件开发工具链、驱动程序等资源，帮助开发者进行系统集成、应用程序开发和优化。这些文档是深入理解A50平台并实现高效开发的关键。 七...
HX8394 MIPI屏幕驱动程序
02-27
本主题聚焦于"HX8394 MIPI屏幕驱动程序"，这是一款专为使用HX8394显示屏的设备设计的驱动，旨在使MIPI（Mobile Industry Processor Interface）接口能够高效、稳定地传输数据。 HX8394是一种常见的TFT-LCD液晶显示...
GSCoolink GSV6182 带嵌入式MCU的MIPI D-PHY转HDMI 2.0
HKTECHLINK的博客
10-26 647
Gscoolink GSV6182是一款高性能、低功耗的MIPI D-PHY到HDMI 2.0转换器
A50 Android P Sensor开发说明书.pdf
09-09
A50 Android P Sensor开发说明书，
高通平台 mipi转接屏调试 （以转lvds icn6202例）
null
06-19 3753
mipi to lvds 显示调试 调试前准备：
【RK3399 Android】天马MIPI屏幕TM080TDGP01，启动参数dts配置调试。
小杜的专栏
03-12 4865
前期调过天马的10寸屏，现在要更换天马的8寸屏，特地记录一下调试过程。本文章只记录屏幕参数调试过程，其他硬件调试过程不再详细描述，有需要可以参考其他文章。需要注意的硬件资源包括复位引脚，时钟引脚，信号引脚，I2C引脚等。 RK3399，Ubuntu系统，LVDS屏幕配置 调试天马的MIPI屏幕，需要一个配置文件，如下图所示。下载链接我附到最后，需要的可以下载，这个文件为配置天马屏幕的启动序列。 我使用的是RK3399，MIPI的配置文...
全志XR806开发板适配ST7789LCD屏幕测试
DOT小文哥的博客
12-13 273
本次使用XR806实现ST7789的屏幕的驱动。本文使用的LCD屏幕的原理图如下，可以确定LCD屏幕的控制引脚接线。 XR806与LCD屏幕的控制引脚分布如下实际的连接效果如图所示。ST7789的驱动使用中景园的LCD驱动库，驱动文件包括在XR806的示例程序中GPIO工程的基础上进行移植。在gpio示例文件夹中添加lcd的驱动代码。移植时要实现对LCD引脚的控制，在lcd_init.h中添加以下代码 在lcd_init.c中添加引脚的初始化函数，并替换延时函数为OS_MSleep,相关的带啊吗如下 在ma
MIPI解决方案 ICN6202：MIPI DSI转LVDS转换芯片
TE13530609500的博客
06-20 1722
型号：ICN6202:MIPI DSI TO LVDS 功能： ICN6202是一颗MIPI DSI转LVDS的桥接芯片
MIPI接口资料汇总（精）
smartvxworks的博客
07-23 895
MIPI接口资料汇总（精） 一、介绍 1、MIPI联盟，即移动产业处理器接口（Mobile Industry Processor Interface 简称MIPI）联盟。MIPI（移动产业处理器接口）是MIPI联盟发起的为移动应用处理器制定的开放标准和一个规范。 2、MIPI联盟定义了一套接口标准，把移动设备内部的接口如摄像头、显示屏、基带、射频接口等标准化，从而增加设计灵活性，同时降低成本、设计复杂度、功耗和EMI。 3、传感器与单片机之间的接口标准有很多，如UART协议、I2C、I2S、SPI、
关于全志T113开发板接7寸LCD屏幕显示异常问题的解决方案
DOT小文哥的博客
05-17 1485
2.width和height主要是用来计算dpi使用的，我这里写的280最终计算出来的dpi大概是97左右，windows标准的是96，反正相差无几我也没有细调了，lcd_x和lcd_y在原来的代码里主要是用来计算内核里面有一张图片的缩放使用的。1.设备树里面timing，除了width、height、lcd_x和lcd_y之外的参数全没有用上（一开始不停的源码里面找这些参数在什么地方配置的，最后发现特么的根本就没有地方使用过这些参数）这里就不给分析经过了，因为是真的真的太漫长了，搞得我头都大了。
I.MX RT1170之MIPI DSI初始化和显示流程详解
主要分享硬件、嵌入式软件部分知识
06-04 1086
MIPI DSI（）是一种广泛应用于移动设备显示屏的接口标准。由MIPI联盟制定，DSI接口旨在提供高效、低功耗的显示屏数据传输解决方案。本节来就通过学习I.MX RT1170单片机中的MIPI DSI接口例程，来学习MIPI DSI的初始化流程和相关的参数。
自制mipi屏幕驱动板
11-29
制作MIPI屏幕驱动板需要一些基础的电子知识和技能。下面是一些关键步骤： 首先，需要准备MIPI屏幕驱动器和相关元器件，例如调制解调器和控制芯片。确保购买的驱动器兼容您要使用的屏幕。 其次，根据所选择的MIPI屏幕和驱动芯片，设计出原理图。这一步可以通过软件如Altium Designer或Eagle进行。 然后，根据原理图进行PCB布局设计，将各个元器件布置在适当的位置上，并确保信号线和供电线的正确连接。这一步需要一定的电路设计和封装知识。 接下来，制作出来的PCB板需要通过打样的方式进行验证。制作PCB的方法有很多种，可以选择将原理图发送给专业的PCB制造商进行打样。 一旦验证通过，就可以进行焊接工作。使用适当的焊接技术，将各个元器件焊接到PCB板上。确保焊接质量和连接可靠性。 完成焊接后，可以将驱动板与MIPI屏幕连接，并使用适当的电源进行供电。确保电源与驱动板之间的电气连接正确。 最后，对驱动板进行测试。使用适当的信号源和控制器，发送信号到MIPI屏幕，确保显示正常。 总结来说，自制MIPI屏幕驱动板需要电路设计、PCB布局、焊接以及测试等一系列步骤。这需要掌握一定的电子知识和技能，以及相应的工具和设备。在整个过程中，确保按照规范进行操作，并仔细检查和测试每一个步骤，以保证制作出的驱动板质量可靠。
评论 4
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值