关于纬晶显示屏幕在AK8801上复位信号的问题

AK_PRIVATE/DRIVERS/DISPLAY/ANYKA_LCD/LCDController/base_LCDController.cpp文件中：

VOID LCD_CONTROLLER::ResetLcm(VOID)
{
    REG32((DWORD*)(m_lcdRegMap + LCD_RESET_SIGNAL_REG_OFFSET)) = RESET_SIGNAL;
    Sleep(2);
    REG32((DWORD*)(m_lcdRegMap + LCD_RESET_SIGNAL_REG_OFFSET)) = 0;
    Sleep(2);
    REG32((DWORD*)(m_lcdRegMap + LCD_RESET_SIGNAL_REG_OFFSET)) = RESET_SIGNAL;
    Sleep(2);
}

 ------------------------------------------

ANYKA780X-BSP/Package_Source_V2.4.0B_EPC_LEVEL1/PLATFORM/AK780X/SRC/INC/REGINC/AK_lcd.h文件中：

//LCD_RESET_SIGNAL_REG_OFFSET
#define RESET_SIGNAL                (0x1)

 ------------------------------------------------------

ANYKA780X-BSP/Package_Source_V2.4.0B_EPC_LEVEL1/PLATFORM/AK780X/SRC/INC/REGINC/AK_base_regs.h中

#define AK_BASE_REG_PA_LCD                      (0x20010000) //LCD control

---------------------------------------------

    pa.LowPart  = AK_BASE_REG_PA_LCD;
    pa.HighPart = 0;
    m_lcdRegMap = (BYTE *)MmMapIoSpace(pa, REG_LENGTH, FALSE);

 

初始化时已经实现了拉高-拉低-拉高的过程。

 

 

AK_base_regs.h中的SPI部分再好好看看，找到寄存器访问方法。