- 博客(1)
- 资源 (9)
- 收藏
- 关注
原创 【Gdisk 修复GPT table corrupt】
The backup GPT table is corrupt, but the primary appears OK, so that will be used.[root@b8cef6cc319b-56950 rt]# gdiskGPT fdisk (gdisk) version 1.0.3Type device filename, or press <Enter> to exit: /dev/sdaCaution: invalid backup GPT header,
2022-03-11 09:39:56 2633
dmidecode 源码
Dmidecode reports information about your system's hardware as described in
your system BIOS according to the SMBIOS/DMI standard. This information
typically includes system manufacturer, model name, serial number, BIOS
version, asset tag as well as a lot of other details of varying level of
interest and reliability depending on the manufacturer. This will often
include usage status for the CPU sockets, expansion slots (e.g. AGP, PCI,
ISA) and memory module slots, and the list of I/O ports (e.g. serial,
parallel, USB).
2018-01-22
flashfru 源码 C
flashfru is a utility for reading/writing FRU data.It is used to flash fru information
by using the Intelligent Platform Management Interface.
It requires that the FRU spec defined follow FRU information Storage Definitioin(V1.0),and now this utility only supports at most 10 additional custom info fileds for
"Chassis","Board" and "Product" respectively.
This utility supports flashing FRU data in a body with the configuration file "fruconfig.ini"(or other file user specified) or re-flashing/inserting a single item. Before re-flashing the single item,the FRU info storaged in FRU ROM must be available and intact.
Because the KCS base address is a variable(0xCA2 or 0xCA8 in general,but sometimes it's not any of these two),so before using this utility to read and write FRU information, you should verify the KCS base address in "kcsconfig.ini", and this file must be in the same directory with the "flashfru" utility while using the utility.
This version of utility is developped in Linux red hat 6.2.
2018-01-22
PCI 设备全套驱动源码
PCI 设备 驱动 源码
This package contains the PCI Utilities, version 3.1.7.
The PCI Utilities package contains a library for portable access to PCI bus
configuration registers and several utilities based on this library.
In runs on the following systems:
Linux (via /sys/bus/pci, /proc/bus/pci or i386 ports)
FreeBSD (via /dev/pci)
NetBSD (via libpci)
OpenBSD (via /dev/pci)
GNU/kFreeBSD (via /dev/pci)
Solaris/i386 (direct port access)
Aix (via /dev/pci and odmget)
GNU Hurd (direct port access)
Windows (direct port access)
CYGWIN (direct port access)
It should be very easy to add support for other systems as well (volunteers
wanted; if you want to try that, I'll be very glad to see the patches and
include them in the next version).
2018-01-22
空空如也
TA创建的收藏夹 TA关注的收藏夹
TA关注的人