安装yum源
yum install https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-7-x86_64/pgdg-centos10-10-2.noarch.rpm
安装客户端和服务端
yum install -y postgresql10-server postgresql10
安装完会在系统中建立postgres用户,并在其.bash_profile中设置PGDATA=/var/lib/pgsql/10/data
在/usr/lib/systemd/system/目录建立postgresql-10.service用于支持 systemd调用
systemd设置开机启动原理
支持 systemd启动的程序会在/usr/lib/systemd/system/下创建.service启动脚本
systemctl enable postgresql-10.service
Created symlink from /etc/systemd/system/multi-user.target.wants/postgresql-10.service to /usr/lib/systemd/system/postgresql-10.service.
设置开机启动就是在/etc/systemd/system/multi-user.target.wants/设置/usr/lib/systemd/system/对应service的符号连接
systemctl disable postgresql-10.service
Removed symlink /etc/systemd/system/multi-user.target.wants/postgresql-10.service
取消开机启动就是在/etc/systemd/system/multi-user.target.wants/删除对应service的符号连接
数据库初始化脚本postgresql-10-setup会读取/usr/lib/systemd/system/postgresql-10.service脚本里面的PGDATA用来设置数据库文件的存放位置
建立数据库数据文件存放目录
mkdir -p /data/pgsql/10/data/
chown postgres /data/pgsql -R
修改配置文件
使用root用户修改/usr/lib/systemd/system/postgresql-10.service的PGDATA路径
vim /usr/lib/systemd/system/postgresql-10.service
将
Environment=PGDATA=/var/lib/pgsql/10/data/
改成
Environment=PGDATA=/data/pgsql/10/data/
而后
systemctl daemon-reload
从新加载配置文件
修改postgres用户的~/.bash_profile的环境变量PGDATA为实际路径(不修改这个对于整个安装过程没有任何影响)
su - postgres
vim ~/.bash_profile
将
PGDATA=/var/lib/pgsql/10/data
改成
PGDATA=/data/pgsql/10/data
确认配置文件
postgresql-10-setup初始化脚本,会经过
systemctl show -p Environment "postgresql-10.service" |
sed 's/^Environment=//' | tr ' ' '\n' |
sed -n 's/^PGDATA=//p' | tail -n 1
获取数据库文件存放的位置,执行以上命令,若是显示的路径跟设置的路径不一致,就须要执行
systemctl daemon-reload
从新加载配置文件,再次查看,若是路径还不对,就说明设置的路径有问题。
初始化数据库
使用root用户执行
/usr/pgsql-10/bin/postgresql-10-setup initdb
初始化数据库后会在/data/pgsql/10/data/建立数据库相关的数据文件和 配置文件
而且会将数据库文件存放的目录/data目录权限设为0700,因此若是要迁移到其余路径,也应该将该目录设为 chmod 0700,不然启动会报错
开启远程访问
修改配置文件postgresql.conf
vim /data/pgsql/10/data/postgresql.conf
修改#listen_addresses = 'localhost' 为 listen_addresses='*' (注意须要删除#注释)
固然,此处‘*’也能够改成任何你想开放的服务器IP
信任远程链接
修改配置文件pg_hba.conf
vim /data/pgsql/10/data/pg_hba.conf
使用shift+g跳至底部
# IPv4 local connections:
host all all 127.0.0.1/32 ident
为
# IPv4 local connections:
host all all 0.0.0.0/0 md5
0.0.0.0/0表示全部IP可链接,也能够设置为特定IP
设置开机启动
systemctl enable postgresql-10
启动数据库
systemctl start postgresql-10
修改数据库管理员密码
su - postgres
psql
输入
\password
或者
\password postgres
防火墙开放5432端口
CentOS 防火墙中内置了PostgreSQL服务,配置文件位置在/usr/lib/firewalld/services/postgresql.xml,咱们只需以服务方式将PostgreSQL服务开放便可
firewall-cmd --add-service=postgresql --permanent 开放postgresql服务
firewall-cmd --reload 重载防火墙
PostgreSQL13,指定存储目录,并配置自启动
一、安装PostgreSQL13
以root身份运行如下命令
rpm -ivh postgresql13-libs-13.1-3PGDG.rhel7.x86_64
rpm -ivh postgresql13-13.1-3PGDG.rhel7.x86_64
rpm -ivh postgresql13-server-13.1-3PGDG.rhel7.x86_64
rpm -ivh postgresql13-contrib-13.1-3PGDG.rhel7.x86_64
rpm -ivh postgresql13-pltcl-13.1-3PGDG.rhel7.x86_64
rpm -ivh postgresql13-devel-13.1-3PGDG.rhel7.x86_64.rpm
/usr/pgsql-10/bin/
二、 数据库配置
2.1 修改环境变量
$ sudo su - postgres
$ vi ~/.bashrc
export PGHOME=/usr/pgsql-13
export PGDATA=/data/pgsql/13/data
export PGUSER=postgres
export LD_LIBRARY_PATH=$PGHOME/lib:$LD_LIBRARY_PATH
export PATH=$PGHOME/bin:$PATH
2.2 修改数据库配置
初始化数据库
initdb
修改postgresql.conf
$ cd $PGDATA
$ vi postgresql.conf
# 修改listen_addresses
listen_addresses = '*'
修改pg_hba.conf
$ cd $PGDATA
$ vi pg_hba.conf
# 新增一行
host all all 0.0.0.0/0 md5
三、配置自启动
修改数据存储目录在自启动脚本中的值
$ vi /usr/lib/systemd/system/postgresql-13.service
# Location of database directory
# Environment=PGDATA=/var/lib/pgsql/13/data/ #-- 注释掉这一句
Environment=PGDATA=/data/pgsql/13/data/ #-- 修正为实际值
使用系统命令控制数据库启停
systemctl enable postgresql-13
systemctl status postgresql-13
systemctl start postgresql-13
-----------------------------------
安装PostgreSQL13,指定存储目录,并配置自启动