max no of gateways exceeded (100)
smgw -> goto -> logged clients check if it is more then 100.
sort the connections according to date/time and delete old connections.
also you have to check for remote logins
smgw -> goto -> remote gateways check if it more then 100.
删除冗余RFC连接后测试通过,没有出现Dump
当然也有另外一种方法 就是修改RFC最大连接数来解决此问题,具体方法转见下:
If this issue occurred again, you may need to increase the maximum number of the remote gateways parameter. You can increase the value in transaction RZ11 via parameter rdisp/max_gateways. Default value is set to 100.
You also may need to change the parameter value for gw/so_keepalive to 1. This will let the TCP/IP network protocol sends messages to the partner. If these are not answered, an error message is reported to the initiator (in this case, the gateway) and the connection can be closed. This parameter is useful when network connections are separate by firewall software, connections are retained in the gateway because the TCP/IP network protocol does not report any connection errors. As a result, connections are repeatedly made to the same system over a longer period and this causes the gateway’s connection table to overflow.