bzoj1609 [Usaco2008 Feb]Eating Together麻烦的聚餐

(http://www.elijahqi.win/2017/12/29/bzoj1609-usaco20%E2%80%A6ng-together%E9%BA%BB%E7%83%A6%E7%9A%84%E8%81%9A%E9%A4%90/%20%E2%80%8E)
题目描述

The cows are so very silly about their dinner partners. They have organized themselves into three groups (conveniently numbered 1, 2, and 3) that insist upon dining together. The trouble starts when they line up at the barn to enter the feeding area.

Each cow i carries with her a small card upon which is engraved Di (1 ≤ Di ≤ 3) indicating her dining group membership. The entire set of N (1 ≤ N ≤ 30,000) cows has lined up for dinner but it’s easy for anyone to see that they are not grouped by their dinner-partner cards.

FJ’s job is not so difficult. He just walks down the line of cows changing their dinner partner assignment by marking out the old number and writing in a new one. By doing so, he creates groups of cows like 111222333 or 333222111 where the cows’ dining groups are sorted in either ascending or descending order by their dinner cards.

FJ is just as lazy as the next fellow. He’s curious: what is the absolute mminimum number of cards he must change to create a proper grouping of dining partners? He must only change card numbers and must not rearrange the cows standing in line.

FJ的奶牛们在吃晚饭时很傻。他们把自己组织成三组(方便编号为1, 2和3),坚持一起用餐。当他们在谷仓排队进入喂食区时,麻烦就开始了。

每头奶牛都随身带着一张小卡片,小卡片上刻的是Di(1≤Di≤3)表示她属于哪一组。所有的N(1≤N≤30000)头奶牛排队吃饭,但他们并不能按卡片上的分组站好。

FJ的工作并不是那么难。他只是沿着牛的路线走下去,把旧的号码标出来,换上一个新的。通过这样做,他创造了一群奶牛,比如111222333或333222111,奶牛的就餐组按他们的晚餐卡片按升序或降序排列。

FJ就像任何人一样懒惰。他很好奇:怎样他才能进行适当的分组,使得他只要修改最少次数的数字?由于奶牛们已经很长时间没有吃到饭了,所以“哞哞”的声音到处都是,FJ只好更换卡号,而不能重新排列已经排好队的奶牛。
输入输出格式

输入格式:

Line 1: A single integer: N
Lines 2..N+1: Line i describes the i-th cow's current dining group with a single integer: Di
第1行:一个整数:n
第2~n+1行:第i-1行描述第i个奶牛目前分组。

输出格式:

Line 1: A single integer representing the minimum number of changes that must be made so that the final sequence of cows is sorted in either ascending or descending order

一个整数,表示必须做出的最小变化数,以便以升序或降序排序最终序列。
输入输出样例

输入样例#1: 复制

5
1
3
2
1
1

输出样例#1: 复制

1

说明

感谢@一思千年 提供翻译

简单dp 没看清楚题目wa了好几发 题目求一个递增或者递降的序列即可

设f[i][num]表示我现在处于第i号位置 我选的数是num的代价是多少

那么我就直接递增递降做一遍就好啦


#include<cstdio>
#include<cstring>
#include<algorithm>
#define N 33000
using namespace std; 
inline char gc(){
    static char now[1<<16],*S,*T;
    if (T==S) {T=(S=now)+fread(now,1,1<<16,stdin);if (T==S) return EOF;}
    return *S++;
}
inline int read(){
    int x=0;char ch=gc();
    while(ch<'0'||ch>'9') ch=gc();
    while(ch<='9'&&ch>='0') x=x*10+ch-'0',ch=gc();
    return x;
}
int a[N],f[N][3],n;
int main(){
    freopen("2896.in","r",stdin);
    n=read();for (int i=1;i<=n;++i) a[i]=read();
    for (int i=1;i<=n;++i){
        f[i][1]=f[i-1][1]+(a[i]!=1);
        f[i][2]=min(f[i-1][1],f[i-1][2])+(a[i]!=2);
        f[i][3]=min(min(f[i-1][2],f[i-1][1]),f[i-1][3])+(a[i]!=3);
    }int ans=f[n][3];ans=min(ans,min(f[n][1],f[n][2]));memset(f,0,sizeof(f));
    for (int i=1;i<=n;++i){
        f[i][3]=f[i-1][3]+(a[i]!=3);
        f[i][2]=min(f[i-1][3],f[i-1][2])+(a[i]!=2);
        f[i][1]=min(min(f[i-1][2],f[i-1][3]),f[i-1][1])+(a[i]!=1);
    }ans=min(ans,f[n][1]);ans=min(ans,min(f[n][3],f[n][2]));printf("%d\n",ans);
    return 0;
}

  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
题目描述 牛牛和她的朋友们正在玩一个有趣的游戏,他们需要构建一个有 $n$ 个节点的无向图,每个节点都有一个唯一的编号并且编号从 $1$ 到 $n$。他们需要从节点 $1$ 到节点 $n$ 找到一条最短路径,其中路径长度是经过的边权的和。为了让游戏更有趣,他们决定在图上添加一些额外的边,这些边的权值都是 $x$。他们想知道,如果他们添加的边数尽可能少,最短路径的长度最多会增加多少。 输入格式 第一行包含两个正整数 $n$ 和 $m$,表示节点数和边数。 接下来 $m$ 行,每行包含三个整数 $u_i,v_i,w_i$,表示一条无向边 $(u_i,v_i)$,权值为 $w_i$。 输出格式 输出一个整数,表示最短路径的长度最多会增加多少。 数据范围 $2 \leq n \leq 200$ $1 \leq m \leq n(n-1)/2$ $1 \leq w_i \leq 10^6$ 输入样例 #1: 4 4 1 2 2 2 3 3 3 4 4 4 1 5 输出样例 #1: 5 输入样例 #2: 4 3 1 2 1 2 3 2 3 4 3 输出样例 #2: 2 算法 (BFS+最短路) $O(n^3)$ 我们把问题转化一下,假设原图中没有添加边,所求的就是点 $1$ 到点 $n$ 的最短路,并且我们已经求出了这个最短路的长度 $dis$。 接下来我们从小到大枚举边权 $x$,每次将 $x$ 加入图中,然后再次求解点 $1$ 到点 $n$ 的最短路 $dis'$,那么增加的最短路长度就是 $dis'-dis$。 我们发现,每次加入一个边都需要重新求解最短路。如果我们使用 Dijkstra 算法的话,每次加入一条边需要 $O(m\log m)$ 的时间复杂度,总的时间复杂度就是 $O(m^2\log m)$,无法通过本题。因此我们需要使用更优秀的算法。 观察到 $n$ 的范围比较小,我们可以考虑使用 BFS 求解最短路。如果边权均为 $1$,那么 BFS 可以在 $O(m)$ 的时间复杂度内求解最短路。那么如果我们只是加入了一条边的话,我们可以将边权为 $x$ 的边看做 $x$ 条边的组合,每次加入该边时,我们就在原始图上添加 $x$ 条边,边权均为 $1$。这样,我们就可以使用一次 BFS 求解最短路了。 但是,我们不得不考虑加入多条边的情况。如果我们还是将边权为 $x$ 的边看做 $x$ 条边的组合,那么我们就需要加入 $x$ 条边,而不是一条边。这样,我们就不能使用 BFS 了。 但是,我们可以使用 Floyd 算法。事实上,我们每次加入边时,只有边权等于 $x$ 的边会发生变化。因此,如果我们枚举边权 $x$ 时,每次只需要将边权等于 $x$ 的边加入图中,然后使用 Floyd 算法重新计算最短路即可。由于 Floyd 算法的时间复杂度为 $O(n^3)$,因此总的时间复杂度为 $O(n^4)$。 时间复杂度 $O(n^4)$ 空间复杂度 $O(n^2)$ C++ 代码 注意点:Floyd算法计算任意两点之间的最短路径,只需要在之前的路径基础上加入新的边构成的新路径进行更新即可。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值