DES算法

环境 visual studio 2010

首先新建一个win32项目

在头文件上点击右键-->新建项目-->命名为 DES.h

拷贝下面代码：

/*DES.h*/ #ifndef __DES__ #define __DES__ #define PLAIN_FILE_OPEN_ERROR -1 #define KEY_FILE_OPEN_ERROR -2 #define CIPHER_FILE_OPEN_ERROR -3 #define OK 1 typedef char ElemType; ElemType plainBlock[8],cipherBlock[8],keyBlock[8]; ElemType bKey[64]; ElemType subKeys[16][48]; ElemType plain[1000]={0}; ElemType keyStr[1000]={0}; ElemType cipher[1000]={0}; ElemType plain1[1000]={0}; //初始置换表IP int IP_Table[64] = { 57,49,41,33,25,17,9,1, 59,51,43,35,27,19,11,3, 61,53,45,37,29,21,13,5, 63,55,47,39,31,23,15,7, 56,48,40,32,24,16,8,0, 58,50,42,34,26,18,10,2, 60,52,44,36,28,20,12,4, 62,54,46,38,30,22,14,6}; //逆初始置换表IP^-1 int IP_1_Table[64] = {39,7,47,15,55,23,63,31, 38,6,46,14,54,22,62,30, 37,5,45,13,53,21,61,29, 36,4,44,12,52,20,60,28, 35,3,43,11,51,19,59,27, 34,2,42,10,50,18,58,26, 33,1,41,9,49,17,57,25, 32,0,40,8,48,16,56,24}; //扩充置换表E int E_Table[48] = {31, 0, 1, 2, 3, 4, 3, 4, 5, 6, 7, 8, 7, 8,9,10,11,12, 11,12,13,14,15,16, 15,16,17,18,19,20, 19,20,21,22,23,24, 23,24,25,26,27,28, 27,28,29,30,31, 0}; //置换函数P int P_Table[32] = {15,6,19,20,28,11,27,16, 0,14,22,25,4,17,30,9, 1,7,23,13,31,26,2,8, 18,12,29,5,21,10,3,24}; //S盒 int S[8][4][16] =//S1 {{{14,4,13,1,2,15,11,8,3,10,6,12,5,9,0,7}, {0,15,7,4,14,2,13,1,10,6,12,11,9,5,3,8}, {4,1,14,8,13,6,2,11,15,12,9,7,3,10,5,0}, {15,12,8,2,4,9,1,7,5,11,3,14,10,0,6,13}}, //S2 {{15,1,8,14,6,11,3,4,9,7,2,13,12,0,5,10}, {3,13,4,7,15,2,8,14,12,0,1,10,6,9,11,5}, {0,14,7,11,10,4,13,1,5,8,12,6,9,3,2,15}, {13,8,10,1,3,15,4,2,11,6,7,12,0,5,14,9}}, //S3 {{10,0,9,14,6,3,15,5,1,13,12,7,11,4,2,8}, {13,7,0,9,3,4,6,10,2,8,5,14,12,11,15,1}, {13,6,4,9,8,15,3,0,11,1,2,12,5,10,14,7}, {1,10,13,0,6,9,8,7,4,15,14,3,11,5,2,12}}, //S4 {{7,13,14,3,0,6,9,10,1,2,8,5,11,12,4,15}, {13,8,11,5,6,15,0,3,4,7,2,12,1,10,14,9}, {10,6,9,0,12,11,7,13,15,1,3,14,5,2,8,4}, {3,15,0,6,10,1,13,8,9,4,5,11,12,7,2,14}}, //S5 {{2,12,4,1,7,10,11,6,8,5,3,15,13,0,14,9}, {14,11,2,12,4,7,13,1,5,0,15,10,3,9,8,6}, {4,2,1,11,10,13,7,8,15,9,12,5,6,3,0,14}, {11,8,12,7,1,14,2,13,6,15,0,9,10,4,5,3}}, //S6 {{12,1,10,15,9,2,6,8,0,13,3,4,14,7,5,11}, {10,15,4,2,7,12,9,5,6,1,13,14,0,11,3,8}, {9,14,15,5,2,8,12,3,7,0,4,10,1,13,11,6}, {4,3,2,12,9,5,15,10,11,14,1,7,6,0,8,13}}, //S7 {{4,11,2,14,15,0,8,13,3,12,9,7,5,10,6,1}, {13,0,11,7,4,9,1,10,14,3,5,12,2,15,8,6}, {1,4,11,13,12,3,7,14,10,15,6,8,0,5,9,2}, {6,11,13,8,1,4,10,7,9,5,0,15,14,2,3,12}}, //S8 {{13,2,8,4,6,15,11,1,10,9,3,14,5,0,12,7}, {1,15,13,8,10,3,7,4,12,5,6,11,0,14,9,2}, {7,11,4,1,9,12,14,2,0,6,10,13,15,3,5,8}, {2,1,14,7,4,10,8,13,15,12,9,0,3,5,6,11}}}; //置换选择1 int PC_1[56] = {56,48,40,32,24,16,8, 0,57,49,41,33,25,17, 9,1,58,50,42,34,26, 18,10,2,59,51,43,35, 62,54,46,38,30,22,14, 6,61,53,45,37,29,21, 13,5,60,52,44,36,28, 20,12,4,27,19,11,3}; //置换选择2 int PC_2[48] = {13,16,10,23,0,4,2,27, 14,5,20,9,22,18,11,3, 25,7,15,6,26,19,12,1, 40,51,30,36,46,54,29,39, 50,44,32,46,43,48,38,55, 33,52,45,41,49,35,28,31}; //对左移次数的规定 int MOVE_TIMES[16] = {1,1,2,2,2,2,2,2,1,2,2,2,2,2,2,1}; int ByteToBit(ElemType ch,ElemType bit[8]); int BitToByte(ElemType bit[8],ElemType *ch); int Char8ToBit64(ElemType ch[8],ElemType bit[64]); int Bit64ToChar8(ElemType bit[64],ElemType ch[8]); int DES_MakeSubKeys(ElemType key[64],ElemType subKeys[16][48]); int DES_PC1_Transform(ElemType key[64], ElemType tempbts[56]); int DES_PC2_Transform(ElemType key[56], ElemType tempbts[48]); int DES_ROL(ElemType data[56], int time); int DES_IP_Transform(ElemType data[64]); int DES_IP_1_Transform(ElemType data[64]); int DES_E_Transform(ElemType data[48]); int DES_P_Transform(ElemType data[32]); int DES_SBOX(ElemType data[48]); int DES_XOR(ElemType R[48], ElemType L[48],int count); int DES_Swap(ElemType left[32],ElemType right[32]); int DES_EncryptBlock(ElemType plainBlock[8], ElemType subKeys[16][48], ElemType cipherBlock[8]); int DES_DecryptBlock(ElemType cipherBlock[8], ElemType subKeys[16][48], ElemType plainBlock[8]); void DES_Encrypt(); void DES_Decrypt(); #endif

然后右键源文件-->新建项目-->命名为 DES.cpp

拷贝下面代码：

#include "stdio.h" #include "memory.h" #include "time.h" #include "stdlib.h" #include<string.h> #include<stdio.h> #ifndef __DES__ #include"DES.h" #endif int ByteToBit(ElemType ch, ElemType bit[8]){ int cnt; for(cnt = 0;cnt < 8; cnt++){ *(bit+cnt) = (ch>>cnt)&1; } return 0; } //二进制转换成字节 int BitToByte(ElemType bit[8],ElemType *ch){ int cnt; for(cnt = 0;cnt < 8; cnt++){ *ch |= *(bit + cnt)<<cnt; } return 0; } //将长度为8的字符串转为二进制位串 int Char8ToBit64(ElemType ch[8],ElemType bit[64]){ int cnt; for(cnt = 0; cnt < 8; cnt++){ ByteToBit(*(ch+cnt),bit+(cnt<<3)); } return 0; } //将二进制位串转为长度为8的字符串 int Bit64ToChar8(ElemType bit[64],ElemType ch[8]){ int cnt; memset(ch,0,8); for(cnt = 0; cnt < 8; cnt++){ BitToByte(bit+(cnt<<3),ch+cnt); } return 0; } //生成子密钥 int DES_MakeSubKeys(ElemType key[64],ElemType subKeys[16][48]){ ElemType temp[56]; int cnt; DES_PC1_Transform(key,temp);//PC1置换 for(cnt = 0; cnt < 16; cnt++){//16轮跌代，产生16个子密钥 DES_ROL(temp,MOVE_TIMES[cnt]);//循环左移 DES_PC2_Transform(temp,subKeys[cnt]);//PC2置换，产生子密钥 } return 0; } //密钥置换1 int DES_PC1_Transform(ElemType key[64], ElemType tempbts[56]){ int cnt; for(cnt = 0; cnt < 56; cnt++){ tempbts[cnt] = key[PC_1[cnt]]; } return 0; } //密钥置换2 int DES_PC2_Transform(ElemType key[56], ElemType tempbts[48]){ int cnt; for(cnt = 0; cnt < 48; cnt++){ tempbts[cnt] = key[PC_2[cnt]]; } return 0; } //循环左移 int DES_ROL(ElemType data[56], int time){ ElemType temp[56]; //保存将要循环移动到右边的位 memcpy(temp,data,time); memcpy(temp+time,data+28,time); //前28位移动 memcpy(data,data+time,28-time); memcpy(data+28-time,temp,time); //后28位移动 memcpy(data+28,data+28+time,28-time); memcpy(data+56-time,temp+time,time); return 0; } //IP置换 int DES_IP_Transform(ElemType data[64]){ int cnt; ElemType temp[64]; for(cnt = 0; cnt < 64; cnt++){ temp[cnt] = data[IP_Table[cnt]]; } memcpy(data,temp,64); return 0; } //IP逆置换 int DES_IP_1_Transform(ElemType data[64]){ int cnt; ElemType temp[64]; for(cnt = 0; cnt < 64; cnt++){ temp[cnt] = data[IP_1_Table[cnt]]; } memcpy(data,temp,64); return 0; } //扩展置换 int DES_E_Transform(ElemType data[48]){ int cnt; ElemType temp[48]; for(cnt = 0; cnt < 48; cnt++){ temp[cnt] = data[E_Table[cnt]]; } memcpy(data,temp,48); return 0; } //P置换 int DES_P_Transform(ElemType data[32]){ int cnt; ElemType temp[32]; for(cnt = 0; cnt < 32; cnt++){ temp[cnt] = data[P_Table[cnt]]; } memcpy(data,temp,32); return 0; } //异或 int DES_XOR(ElemType R[48], ElemType L[48] ,int count){ int cnt; for(cnt = 0; cnt < count; cnt++){ if(R[cnt]!=L[cnt]) { R[cnt] = 1; } else R[cnt] = 0; } return 0; } //S盒置换 int DES_SBOX(ElemType data[48]){ int cnt; int line,row,output; int cur1,cur2; for(cnt = 0; cnt < 8; cnt++){ cur1 = cnt*6; cur2 = cnt<<2; //计算在S盒中的行与列 line = (data[cur1]<<1) + data[cur1+5]; row = (data[cur1+1]<<3) + (data[cur1+2]<<2) + (data[cur1+3]<<1) + data[cur1+4]; output = S[cnt][line][row]; //化为2进制 data[cur2] = (output&0X08)>>3; data[cur2+1] = (output&0X04)>>2; data[cur2+2] = (output&0X02)>>1; data[cur2+3] = output&0x01; } return 0; } //交换 int DES_Swap(ElemType left[32], ElemType right[32]){ ElemType temp[32]; memcpy(temp,left,32); memcpy(left,right,32); memcpy(right,temp,32); return 0; } //加密单个分组 int DES_EncryptBlock(ElemType plainBlock[8], ElemType subKeys[16][48], ElemType cipherBlock[8]){ ElemType plainBits[64]; ElemType copyRight[48]; int cnt; Char8ToBit64(plainBlock,plainBits); //初始置换（IP置换） DES_IP_Transform(plainBits); //16轮迭代 for(cnt = 0; cnt < 16; cnt++){ memcpy(copyRight,plainBits+32,32); //将右半部分进行扩展置换，从32位扩展到48位 DES_E_Transform(copyRight); //将右半部分与子密钥进行异或操作 DES_XOR(copyRight,subKeys[cnt],48); //异或结果进入S盒，输出32位结果 DES_SBOX(copyRight); //P置换 DES_P_Transform(copyRight); //将明文左半部分与右半部分进行异或 DES_XOR(plainBits,copyRight,32); if(cnt != 15){ //最终完成左右部的交换 DES_Swap(plainBits,plainBits+32); } } //逆初始置换（IP^1置换） DES_IP_1_Transform(plainBits); memset(cipherBlock,0,8); Bit64ToChar8(plainBits,cipherBlock); return 0; } int DES_DecryptBlock(ElemType cipherBlock[8], ElemType subKeys[16][48],ElemType plainBlock[8]){ ElemType cipherBits[64]; ElemType copyRight[48]; int cnt; Char8ToBit64(cipherBlock,cipherBits); //初始置换（IP置换） DES_IP_Transform(cipherBits); //16轮迭代 for(cnt = 15; cnt >= 0; cnt--){ memcpy(copyRight,cipherBits+32,32); //将右半部分进行扩展置换，从32位扩展到48位 DES_E_Transform(copyRight); //将右半部分与子密钥进行异或操作 DES_XOR(copyRight,subKeys[cnt],48); //异或结果进入S盒，输出32位结果 DES_SBOX(copyRight); //P置换 DES_P_Transform(copyRight); //将明文左半部分与右半部分进行异或 DES_XOR(cipherBits,copyRight,32); if(cnt != 0){ //最终完成左右部的交换 DES_Swap(cipherBits,cipherBits+32); } } //逆初始置换（IP^1置换） DES_IP_1_Transform(cipherBits); Bit64ToChar8(cipherBits,plainBlock); return 0; } void DES_Encrypt() { int count; int i; printf("请输入明文:\n--------"); gets(plain); printf("\n\n\n请输入密钥:"); gets(keyStr); //设置密钥 memcpy(keyBlock,keyStr,8); //将密钥转换为二进制流 Char8ToBit64(keyBlock,bKey); //生成子密钥 DES_MakeSubKeys(bKey,subKeys); for(i=0; plain[i]!='\0'; i+=8) { for(count=0; count<8; count++) { if(plain[i+count]){ plainBlock[count] = plain[i+count]; }else plainBlock[count] = 0; } DES_EncryptBlock(plainBlock,subKeys,cipherBlock); for(count=0; count<8; count++) { cipher[i+count] = cipherBlock[count]; } } } void DES_Decrypt(){ int count; int i; int times = 0; long fileLen; //设置密钥 memcpy(keyBlock,keyStr,8); //将密钥转换为二进制流 Char8ToBit64(keyBlock,bKey); //生成子密钥 DES_MakeSubKeys(bKey,subKeys); fileLen = strlen(cipher); //取文件指针当前位置 //密文的字节数一定是8的整数倍 for(i=0; i<fileLen; i+=8) { for(count=0; count<8; count++) { cipherBlock[count] = cipher[count+i]; } DES_DecryptBlock(cipherBlock,subKeys,plainBlock); for(count=0; count<8; count++) { plain[i+count] = plainBlock[count]; } } } void main() { printf("*******************DES算法演示***********************\n"); DES_Encrypt(); printf("\n****************************************************\n"); printf("加密后的密文是：\n"); int i; for(i=0; i<strlen(cipher); i++) { printf("%c",cipher[i]); } printf("\n\n"); DES_Decrypt(); printf("\n****************************************************\n"); printf("再次解密后的明文是：\n--------"); for(i=0; plain[i]!='\0'; i++) { printf("%c",plain[i]); } printf("\n\n"); getchar(); }
保存后，点击运行按钮，一个简单的DES程序就能够完美运行了