CME ERROR's (GSM Equipment related codes)
Error Description
CME ERROR: 0 Phone failure
CME ERROR: 1 No connection to phone
CME ERROR: 2 Phone adapter link reserved
CME ERROR: 3 Operation not allowed
CME ERROR: 4 Operation not supported
CME ERROR: 5 PH_SIM PIN required
CME ERROR: 6 PH_FSIM PIN required
CME ERROR: 7 PH_FSIM PUK required
CME ERROR: 10 SIM not inserted
CME ERROR: 11 SIM PIN required
CME ERROR: 12 SIM PUK required
CME ERROR: 13 SIM failure
CME ERROR: 14 SIM busy
CME ERROR: 15 SIM wrong
CME ERROR: 16 Incorrect password
CME ERROR: 17 SIM PIN2 required
CME ERROR: 18 SIM PUK2 required
CME ERROR: 20 Memory full
CME ERROR: 21 Invalid index
CME ERROR: 22 Not found
CME ERROR: 23 Memory failure
CME ERROR: 24 Text string too long
CME ERROR: 25 Invalid characters in text string
CME ERROR: 26 Dial string too long
CME ERROR: 27 Invalid characters in dial string
CME ERROR: 30 No network service
CME ERROR: 31 Network timeout
CME ERROR: 32 Network not allowed, emergency calls only
CME ERROR: 40 Network personalization PIN required
CME ERROR: 41 Network personalization PUK required
CME ERROR: 42 Network subset personalization PIN required
CME ERROR: 43 Network subset personalization PUK required
CME ERROR: 44 Service provider personalization PIN required
CME ERROR: 45 Service provider personalization PUK required
CME ERROR: 46 Corporate personalization PIN required
CME ERROR: 47 Corporate personalization PUK required
CME ERROR: 48 PH-SIM PUK required
CME ERROR: 100 Unknown error
CME ERROR: 103 Illegal MS
CME ERROR: 106 Illegal ME
CME ERROR: 107 GPRS services not allowed
CME ERROR: 111 PLMN not allowed
CME ERROR: 112 Location area not allowed
CME ERROR: 113 Roaming not allowed in this location area
CME ERROR: 126 Operation temporary not allowed
CME ERROR: 132 Service operation not supported
CME ERROR: 133 Requested service option not subscribed
CME ERROR: 134 Service option temporary out of order
CME ERROR: 148 Unspecified GPRS error
CME ERROR: 149 PDP authentication failure
CME ERROR: 150 Invalid mobile class
CME ERROR: 256 Operation temporarily not allowed
CME ERROR: 257 Call barred
CME ERROR: 258 Phone is busy
CME ERROR: 259 User abort
CME ERROR: 260 Invalid dial string
CME ERROR: 261 SS not executed
CME ERROR: 262 SIM Blocked
CME ERROR: 263 Invalid block
CME ERROR: 772 SIM powered down
CMS ERROR's (GSM Network related codes)
Error Description
CMS ERROR: 1 Unassigned number
CMS ERROR: 8 Operator determined barring
CMS ERROR: 10 Call bared
CMS ERROR: 21 Short message transfer rejected
CMS ERROR: 27 Destination out of service
CMS ERROR: 28 Unindentified subscriber
CMS ERROR: 29 Facility rejected
CMS ERROR: 30 Unknown subscriber
CMS ERROR: 38 Network out of order
CMS ERROR: 41 Temporary failure
CMS ERROR: 42 Congestion
CMS ERROR: 47 Recources unavailable
CMS ERROR: 50 Requested facility not subscribed
CMS ERROR: 69 Requested facility not implemented
CMS ERROR: 81 Invalid short message transfer reference value
CMS ERROR: 95 Invalid message unspecified
CMS ERROR: 96 Invalid mandatory information
CMS ERROR: 97 Message type non existent or not implemented
CMS ERROR: 98 Message not compatible with short message protocol
CMS ERROR: 99 Information element non-existent or not implemente
CMS ERROR: 111 Protocol error, unspecified
CMS ERROR: 127 Internetworking , unspecified
CMS ERROR: 128 Telematic internetworking not supported
CMS ERROR: 129 Short message type 0 not supported
CMS ERROR: 130 Cannot replace short message
CMS ERROR: 143 Unspecified TP-PID error
CMS ERROR: 144 Data code scheme not supported
CMS ERROR: 145 Message class not supported
CMS ERROR: 159 Unspecified TP-DCS error
CMS ERROR: 160 Command cannot be actioned
CMS ERROR: 161 Command unsupported
CMS ERROR: 175 Unspecified TP-Command error
CMS ERROR: 176 TPDU not supported
CMS ERROR: 192 SC busy
CMS ERROR: 193 No SC subscription
CMS ERROR: 194 SC System failure
CMS ERROR: 195 Invalid SME address
CMS ERROR: 196 Destination SME barred
CMS ERROR: 197 SM Rejected-Duplicate SM
CMS ERROR: 198 TP-VPF not supported
CMS ERROR: 199 TP-VP not supported
CMS ERROR: 208 D0 SIM SMS Storage full
CMS ERROR: 209 No SMS Storage capability in SIM
CMS ERROR: 210 Error in MS
CMS ERROR: 211 Memory capacity exceeded
CMS ERROR: 212 Sim application toolkit busy
CMS ERROR: 213 SIM data download error
CMS ERROR: 255 Unspecified error cause
CMS ERROR: 300 ME Failure
CMS ERROR: 301 SMS service of ME reserved
CMS ERROR: 302 Operation not allowed
CMS ERROR: 303 Operation not supported
CMS ERROR: 304 Invalid PDU mode parameter
CMS ERROR: 305 Invalid Text mode parameter
CMS ERROR: 310 SIM not inserted
CMS ERROR: 311 SIM PIN required
CMS ERROR: 312 PH-SIM PIN required
CMS ERROR: 313 SIM failure
CMS ERROR: 314 SIM busy
CMS ERROR: 315 SIM wrong
CMS ERROR: 316 SIM PUK required
CMS ERROR: 317 SIM PIN2 required
CMS ERROR: 318 SIM PUK2 required
CMS ERROR: 320 Memory failure
CMS ERROR: 321 Invalid memory index
CMS ERROR: 322 Memory full
CMS ERROR: 330 SMSC address unknown
CMS ERROR: 331 No network service
CMS ERROR: 332 Network timeout
CMS ERROR: 340 No +CNMA expected
CMS ERROR: 500 Unknown error
CMS ERROR: 512 User abort
CMS ERROR: 513 Unable to store
CMS ERROR: 514 Invalid Status
CMS ERROR: 515 Device busy or Invalid Character in string
CMS ERROR: 516 Invalid length
CMS ERROR: 517 Invalid character in PDU
CMS ERROR: 518 Invalid parameter
CMS ERROR: 519 Invalid length or character
CMS ERROR: 520 Invalid character in text
CMS ERROR: 521 Timer expired
CMS ERROR: 522 Operation temporary not allowed
CMS ERROR: 532 SIM not ready
CMS ERROR: 534 Cell Broadcast error unknown
CMS ERROR: 535 Protocol stack busy
本文来自CSDN博客，转载请标明出处：http://blog.csdn.net/xqhrs232/archive/2010/01/20/5216955.aspx
Here's a list of all of the "+CMS ERROR" codes for the GSM modem interface ... they can be found defined in the ETSI GSM specs. I figure it is worth posting as they are split between the GSM 07.05, GSM 03.40 and GSM 04.11 specs, and I frequently have to look this up for support incidents. (So if nothing else, I'll be able to search out here to find the list.)
CMS ERROR code list (GSM Modem error codes):
1 - "Unassigned (unallocated) number"
This cause indicates that the destination requested by the Mobile Station cannot be reached because, although the number is in a valid format, it is not currently assigned (allocated).
8 - "Operator determined barring"
This cause indicates that the MS has tried to send a mobile originating short message when the MS's network operator or service provider has forbidden such transactions.
10 - "Call barred"
This cause indicates that the outgoing call barred service applies to the short message service for the called destination.
21 - "Short message transfer rejected"
This cause indicates that the equipment sending this cause does not wish to accept this short message, although it could have accepted the short message since the equipment sending this cause is neither busy nor incompatible.
27 - "Destination out of service"
This cause indicates that the destination indicated by the Mobile Station cannot be reached because the interface to the destination is not functioning correctly. The term "not functioning correctly" indicates that a signalling message was unable to be delivered to the remote user; e.g., a physical layer or data link layer failure at the remote user, user equipment off-line, etc.
28 - "Unidentified subscriber"
This cause indicates that the subscriber is not registered in the PLMN (i.e. IMSI not known).
29 - "Facility rejected"
This cause indicates that the facility requested by the Mobile Station is not supported by the PLMN.
30 - "Unknown subscriber"
This cause indicates that the subscriber is not registered in the HLR (i.e. IMSI or directory number is not allocated to a subscriber).
38 - "Network out of order"
This cause indicates that the network is not functioning correctly and that the condition is likely to last a relatively long period of time; e.g., immediately reattempting the short message transfer is not likely to be successful.
41 - "Temporary failure"
This cause indicates that the network is not functioning correctly and that the condition is not likely to last a long period of time; e.g., the Mobile Station may wish to try another short message transfer attempt almost immediately.
42 - "Congestion"
This cause indicates that the short message service cannot be serviced because of high traffic.
47 - "Resources unavailable, unspecified"
This cause is used to report a resource unavailable event only when no other cause applies.
50 - "Requested facility not subscribed"
This cause indicates that the requested short message service could not be provided by the network because the user has not completed the necessary administrative arrangements with its supporting networks.
69 - "Requested facility not implemented"
This cause indicates that the network is unable to provide the requested short message service.
81 - "Invalid short message transfer reference value"
This cause indicates that the equipment sending this cause has received a message with a short message reference which is not currently in use on the MS-network interface.
95 - "Invalid message, unspecified"
This cause is used to report an invalid message event only when no other cause in the invalid message class applies.
96 - "Invalid mandatory information"
This cause indicates that the equipment sending this cause has received a message where a mandatory information element is missing and/or has a content error (the two cases are indistinguishable).
97 - "Message type non-existent or not implemented"
This cause indicates that the equipment sending this cause has received a message with a message type it does not recognize either because this is a message not defined or defined but not implemented by the equipment sending this cause.
98 - "Message not compatible with short message protocol state"
This cause indicates that the equipment sending this cause has received a message such that the procedures do not indicate that this is a permissible message to receive while in the short message transfer state.
99 - "Information element non-existent or not implemented"
This cause indicates that the equipment sending this cause has received a message which includes information elements not recognized because the information element identifier is not defined or it is defined but not implemented by the equipment sending the cause. However, the information element is not required to be present in the message in order for the equipment sending the cause to process the message.
111 - "Protocol error, unspecified"
This cause is used to report a protocol error event only when no other cause applies.
127 - "Interworking, unspecified"
This cause indicates that there has been interworking with a network which does not provide causes for actions it takes; thus, the precise cause for a message which is being send cannot be ascertained.
0...127 - Other values in this range are reserved, defined by GSM 04.11 Annex E-2 values
128 - Telematic interworking not supported x
129 - Short message Type 0 not supported x x
130 - Cannot replace short message x x
143 - Unspecified TP-PID error x x
144 - Data coding scheme (alphabet) not supported x
145 - Message class not supported x
159 - Unspecified TP-DCS error x x
160 - Command cannot be actioned x
161 - Command unsupported x
175 - Unspecified TP-Command error x
176 - TPDU not supported x x
192 - SC busy x
193 - No SC subscription x
194 - SC system failure x
195 - Invalid SME address x
196 - Destination SME barred x
197 - SM Rejected-Duplicate SM x
198 - TP-VPF not supported X
199 - TP-VP not supported X
208 - SIM SMS storage full x
209 - No SMS storage capability in SIM x
210 - Error in MS x
211 - Memory Capacity Exceeded X
212 - SIM Application Toolkit Busy x x
255 - Unspecified error cause
128...255 - Other values in this range are reserved, defined by GSM 03.40 subclause 9.2.3.22 values
300 - ME failure
301 - SMS service of ME reserved
302 - operation not allowed
303 - operation not supported
304 - invalid PDU mode parameter
305 - invalid text mode parameter
310 - SIM not inserted
311 - SIM PIN required
312 - PH-SIM PIN required
313 - SIM failure
314 - SIM busy
315 - SIM wrong
316 - SIM PUK required
317 - SIM PIN2 required
318 - SIM PUK2 required
320 - memory failure
321 - invalid memory index
322 - memory full
330 - SMSC address unknown
331 - no network service
332 - network timeout
340 - no +CNMA acknowledgement expected
500 - unknown error
256...511 - Other values in this range are reserved
512... - manufacturer specific
17 - "Network failure".
This cause is sent to the MS if the MSC cannot service an MS generated request because of PLMN failures, e.g. problems in MAP.
22 - "Congestion".
This cause is sent if the service request cannot be actioned because of congestion (e.g. no channel, facility busy/congested etc.).
22 - "Memory capacity exceeded".
This cause indicates that the mobile station cannot store the incoming short message due to lack of storage capacity.
Note that error "22" is defined twice. It is likely that "CMS ERROR 22" would be due to the first definition, while the second definition is likely to only be a status code for delivery reports.
转自：http://blog.csdn.net/Rookie_CEO/archive/2009/12/30/5097035.aspx
扫一扫
7702
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
