Linux 和Windows下Git服务器的安装与配置
By 飞雪
我在安装配置的过程中,测试了许多方法,出现了各种错误,现将我的总结发布如下,在文中摘录了部分网上内容,但是大部分内容都经过我的修正,该掉了网络上很多内容的错误,按照我的方法和注意事项,应该可以很快完成搭建。
1 Git安装与配置
1.1 Linux下安装git服务
(1)安装 Git
Linux 做为服务器端系统,Windows 作为客户端系统,分别安装 Git
服务器端:
#sudo apt-get install git |
安装完后,查看 Git 版本。
[root@localhost ~]# git --version git version 1.7.1 |
安装完之后,可以使用 Git Bash 作为命令行客户端。
(2)服务器端创建 git 用户,用来管理 Git 服务,并为 git 用户设置密码。
[root@localhost home]# id git id: git:无此用户 [root@localhost home]# useradd git [root@localhost home]# passwd git |
(3)服务器端创建 Git 仓库
设置/home/data/git/gittest.git 为 Git 仓库。
然后把 Git 仓库的 owner 修改为 git。
[root@localhost home]# mkdir -p data/git/gittest.git [root@localhost home]# git init --bare data/git/gittest.git Initialized empty Git repository in /home/data/git/gittest.git/ [root@localhost home]# cd data/git/ [root@localhost git]# chown -R git:git gittest.git/ |
(4)客户端创建 SSH 公钥和私钥
$ ssh-keygen -t rsa -C "472323087@qq.com" |
此时C:\Users\用户名\.ssh 下会多出两个文件id_rsa 和id_rsa.pub。
id_rsa 是私钥;
id_rsa.pub 是公钥。
(5)服务器端 Git 打开 RSA 认证
进入 /etc/ssh 目录,编辑 sshd_config,打开以下三个配置的注释:
RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys |
保存并重启 sshd 服务:
[root@localhost ssh]# /etc/rc.d/init.d/sshd restart |
由AuthorizedKeysFile 得知公钥的存放路径是 .ssh/authorized_keys,实际上是$Home/.ssh/authorized_keys,由于管理 Git 服务的用户是 git,所以实际存放公钥的路径是/home/git/.ssh/authorized_keys。
在 /home/git/ 下创建目录 .ssh。
[root@localhost git]# pwd /home/git
[root@localhost git]# mkdir .ssh
[root@localhost git]# ls -a
. .. .bash_logout .bash_profile .bashrc .gnome2 .mozilla .ssh |
然后把 .ssh 文件夹的 owner 修改为 git。
[root@localhost git]# chown -R git:git .ssh [root@localhost git]# ll -a 总用量 32 drwx------. 5 git git 4096 8月 28 20:04 . drwxr-xr-x. 8 root root 4096 8月 28 19:32 .. -rw-r--r--. 1 git git 18 10月 16 2014 .bash_logout -rw-r--r--. 1 git git 176 10月 16 2014 .bash_profile -rw-r--r--. 1 git git 124 10月 16 2014 .bashrc drwxr-xr-x. 2 git git 4096 11月 12 2010 .gnome2 drwxr-xr-x. 4 git git 4096 5月 8 12:22 .mozilla drwxr-xr-x. 2 git git 4096 8月 28 20:08 .ssh |
(6)将客户端公钥导入服务器端/home/git/.ssh/authorized_keys 文件
回到 Git Bash 下,导入文件:
$ ssh git@192.168.56.101 'cat >> .ssh/authorized_keys' < ~/.ssh/id_rsa.pub |
需要输入服务器端 git 用户的密码。
回到服务器端,查看 .ssh 下是否存在 authorized_keys文件:
[root@localhost git]# cd .ssh [root@localhost .ssh]# ll 总用量 4 -rw-rw-r--. 1 git git 398 8月 28 20:08 authorized_keys |
可以查看一下是否是客户端生成的公钥。
重要:
修改 .ssh 目录的权限为 700
修改 .ssh/authorized_keys 文件的权限为 600
[root@localhost git]# chmod 700 .ssh [root@localhost git]# cd .ssh [root@localhost .ssh]# chmod 600 authorized_keys |
(7)禁止 git 用户 ssh 登录服务器
之前在服务器端创建的 git 用户不允许 ssh