linux make help

make[1]: Entering directory `/home/chenqiang/wrwork/project/fsl_mpc85xx_new/bitbake_build/tmp/work/fsl_mpc85xx-wrs-linux-gnuspe/linux-windriver-3.4-r0/linux'
Cleaning targets:
  clean          - Remove most generated files but keep the config and
                    enough build support to build external modules
  mrproper      - Remove all generated files + config + various backup files
  distclean      - mrproper + remove editor backup and patch files

Configuration targets:
  config      - Update current config utilising a line-oriented program
  nconfig         - Update current config utilising a ncurses menu based program
  menuconfig      - Update current config utilising a menu based program
  xconfig      - Update current config utilising a QT based front-end
  gconfig      - Update current config utilising a GTK based front-end
  oldconfig      - Update current config utilising a provided .config as base
  localmodconfig  - Update current config disabling modules not loaded
  localyesconfig  - Update current config converting local mods to core
  silentoldconfig - Same as oldconfig, but quietly, additionally update deps
  defconfig      - New config with default from ARCH supplied defconfig
  savedefconfig   - Save current config as ./defconfig (minimal config)
  allnoconfig      - New config where all options are answered with no
  allyesconfig      - New config where all options are accepted with yes
  allmodconfig      - New config selecting modules when possible
  alldefconfig    - New config with all symbols set to default
  randconfig      - New config with random answer to all options
  listnewconfig   - List new options
  oldnoconfig     - Same as silentoldconfig but set new symbols to n (unset)

Other generic targets:
  all          - Build all targets marked with [*]
* vmlinux      - Build the bare kernel
* modules      - Build all modules
  modules_install - Install all modules to INSTALL_MOD_PATH (default: /)
  firmware_install- Install all firmware to INSTALL_FW_PATH
                    (default: $(INSTALL_MOD_PATH)/lib/firmware)
  dir/            - Build all files in dir and below
  dir/file.[oisS] - Build specified target only
  dir/file.lst    - Build specified mixed source/assembly target only
                    (requires a recent binutils and recent build (System.map))
  dir/file.ko     - Build module including final link
  modules_prepare - Set up for building external modules
  tags/TAGS      - Generate tags file for editors
  cscope      - Generate cscope index
  gtags           - Generate GNU GLOBAL index
  kernelrelease      - Output the release version string
  kernelversion      - Output the version stored in Makefile
  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH
                    (default: /home/chenqiang/wrwork/project/fsl_mpc85xx_new/bitbake_build/tmp/work/fsl_mpc85xx-wrs-linux-gnuspe/linux-windriver-3.4-r0/linux-fsl-mpc85xx-standard-build/usr)

Static analysers
  checkstack      - Generate a list of stack hogs
  namespacecheck  - Name space analysis on compiled kernel
  versioncheck    - Sanity check on version.h usage
  includecheck    - Check for duplicate included header files
  export_report   - List the usages of all exported symbols
  headers_check   - Sanity check on exported headers
  headerdep       - Detect inclusion cycles in headers
  coccicheck      - Check with Coccinelle.

Kernel packaging:
  rpm-pkg             - Build both source and binary RPM kernel packages
  binrpm-pkg          - Build only the binary kernel package
  deb-pkg             - Build the kernel as a deb package
  tar-pkg             - Build the kernel as an uncompressed tarball
  targz-pkg           - Build the kernel as a gzip compressed tarball
  tarbz2-pkg          - Build the kernel as a bzip2 compressed tarball
  tarxz-pkg           - Build the kernel as a xz compressed tarball
  perf-tar-src-pkg    - Build perf-3.4.34.tar source tarball
  perf-targz-src-pkg  - Build perf-3.4.34.tar.gz source tarball
  perf-tarbz2-src-pkg - Build perf-3.4.34.tar.bz2 source tarball
  perf-tarxz-src-pkg  - Build perf-3.4.34.tar.xz source tarball

Documentation targets:
 Linux kernel internal documentation in different formats:
  htmldocs        - HTML
  pdfdocs         - PDF
  psdocs          - Postscript
  xmldocs         - XML DocBook
  mandocs         - man pages
  installmandocs  - install man pages generated by mandocs
  cleandocs       - clean all generated DocBook files

Architecture specific targets (powerpc):
* zImage          - Build default images selected by kernel config
  zImage.*        - Compressed kernel image (arch/powerpc/boot/zImage.*)
  uImage          - U-Boot native image format
  cuImage.<dt>    - Backwards compatible U-Boot image for older
                    versions which do not support device trees
  dtbImage.<dt>   - zImage with an embedded device tree blob
  simpleImage.<dt> - Firmware independent image.
  treeImage.<dt>  - Support for older IBM 4xx firmware (not U-Boot)
  install         - Install kernel using
                    (your) ~/bin/installkernel or
                    (distribution) /sbin/installkernel or
                    install to $(INSTALL_PATH) and run lilo
  *_defconfig     - Select default config from arch/powerpc/configs

  Targets with <dt> embed a device tree blob inside the image
  These targets support board with firmware that does not
  support passing a device tree directly.  Replace <dt> with the
  name of a dts file from the arch/powerpc/boot/dts/ directory
  (minus the .dts extension).

  adder875_defconfig       - Build for adder875
  amigaone_defconfig       - Build for amigaone
  c2k_defconfig            - Build for c2k
  cell_defconfig           - Build for cell
  celleb_defconfig         - Build for celleb
  chroma_defconfig         - Build for chroma
  chrp32_defconfig         - Build for chrp32
  corenet32_smp_defconfig  - Build for corenet32_smp
  corenet64_smp_defconfig  - Build for corenet64_smp
  ep8248e_defconfig        - Build for ep8248e
  ep88xc_defconfig         - Build for ep88xc
  g5_defconfig             - Build for g5
  gamecube_defconfig       - Build for gamecube
  holly_defconfig          - Build for holly
  linkstation_defconfig    - Build for linkstation
  maple_defconfig          - Build for maple
  mgcoge_defconfig         - Build for mgcoge
  mpc512x_defconfig        - Build for mpc512x
  mpc5200_defconfig        - Build for mpc5200
  mpc7448_hpc2_defconfig   - Build for mpc7448_hpc2
  mpc8272_ads_defconfig    - Build for mpc8272_ads
  mpc83xx_defconfig        - Build for mpc83xx
  mpc85xx_defconfig        - Build for mpc85xx
  mpc85xx_smp_defconfig    - Build for mpc85xx_smp
  mpc866_ads_defconfig     - Build for mpc866_ads
  mpc86xx_defconfig        - Build for mpc86xx
  mpc885_ads_defconfig     - Build for mpc885_ads
  pasemi_defconfig         - Build for pasemi
  pmac32_defconfig         - Build for pmac32
  ppc40x_defconfig         - Build for ppc40x
  ppc44x_defconfig         - Build for ppc44x
  ppc64_defconfig          - Build for ppc64
  ppc64e_defconfig         - Build for ppc64e
  ppc6xx_defconfig         - Build for ppc6xx
  pq2fads_defconfig        - Build for pq2fads
  prpmc2800_defconfig      - Build for prpmc2800
  ps3_defconfig            - Build for ps3
  pseries_defconfig        - Build for pseries
  storcenter_defconfig     - Build for storcenter
  tqm8xx_defconfig         - Build for tqm8xx
  wii_defconfig            - Build for wii

  help-40x         - Show 40x-specific targets
  help-44x         - Show 44x-specific targets
  help-52xx        - Show 52xx-specific targets
  help-83xx        - Show 83xx-specific targets
  help-85xx        - Show 85xx-specific targets
  help-86xx        - Show 86xx-specific targets
  help-boards      - Show all of the above

  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build
  make V=2   [targets] 2 => give reason for rebuild of target
  make O=dir [targets] Locate all output files in "dir", including .config
  make C=1   [targets] Check all c source with $CHECK (sparse by default)
  make C=2   [targets] Force check of all c source with $CHECK
  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections
  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where
        1: warnings which may be relevant and do not occur too often
        2: warnings which occur quite often but may still be relevant
        3: more obscure warnings, can most likely be ignored
        Multiple levels can be combined with W=12 or W=123

Execute "make" or "make all" to build all targets marked with [*]
For further info see the ./README file
make[1]: Leaving directory `/home/chenqiang/wrwork/project/fsl_mpc85xx_new/bitbake_build/tmp/work/fsl_mpc85xx-wrs-linux-gnuspe/linux-windriver-3.4-r0/linux'