Systemctl是一个systemd工具,主要负责控制systemd系统和服务管理器。 Systemd是一个系统管理守护进程、工具和库的集合,用于取代System V初始进程。Systemd的功能是用于集中管理和配置类UNIX系统。 在Linux生态系统中,Systemd被部署到了大多数的标准Linux发行版中,只有为数不多的几个发行版尚未部署。Systemd通常是所有其它守护进程的父进程,但并非总是如此。 ![](https://i-blog.csdnimg.cn/blog_migrate/7aeda45d2895dd550666887337a3a766.jpeg) 使用Systemctl管理Linux服务 本文旨在阐明在运行systemd的系统上“如何控制系统和服务”。 Systemd初体验和Systemctl基础 1. 首先检查你的系统中是否安装有systemd并确定当前安装的版本 # systemd --version systemd 215 +PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR 上例中很清楚地表明,我们安装了215版本的systemd。 2. 检查systemd和systemctl的二进制文件和库文件的安装位置 # whereis systemd systemd:/usr/lib/systemd /etc/systemd /usr/share/systemd /usr/share/man/man1/systemd.1.gz # whereis systemctl systemctl:/usr/bin/systemctl /usr/share/man/man1/systemctl.1.gz 3. 检查systemd是否运行 # ps -eaf | grep [s]ystemd root 10016:27?00:00:00/usr/lib/systemd/systemd --switched-root --system --deserialize 23 root 4441016:27?00:00:00/usr/lib/systemd/systemd-journald root 4691016:27?00:00:00/usr/lib/systemd/systemd-udevd root 5551016:27?00:00:00/usr/lib/systemd/systemd-logind dbus 5561016:27?00:00:00/bin/dbus-daemon --system --address=systemd:--nofork --nopidfile --systemd-activation 注意:systemd是作为父进程(PID=1)运行的。在上面带(-e)参数的ps命令输出中,选择所有进程,(-a)选择除会话前导外的所有进程,并使用(-f)参数输出完整格式列表(即 -eaf)。 也请注意上例中后随的方括号和例子中剩余部分。方括号表达式是grep的字符类表达式的一部分。 4. 分析systemd启动进程 # systemd-analyze Startup finished in487ms(kernel)+2.776s(initrd)+20.229s(userspace)=23.493s 5. 分析启动时各个进程花费的时间 # systemd-analyze blame 8.565s mariadb.service 7.991s webmin.service 6.095s postfix.service 4.311s httpd.service 3.926s firewalld.service 3.780s kdump.service 3.238s tuned.service 1.712s network.service 1.394s lvm2-monitor.service 1.126s systemd-logind.service .... 6. 分析启动时的关键链 # systemd-analyze critical-chain The time after the unit is active or started is printed after the "@" character. The time the unit takes to start is printed after the "+" character. multi-user.target @20.222s └─mariadb.service @11.657s+8.565s └─network.target @11.168s └─network.service @9.456s+1.712s └─NetworkManager.service @8.858s+596ms └─firewalld.service @4.931s+3.926s └─basic.target @4.916s └─sockets.target @4.916s └─dbus.socket @4.916s └─sysinit.target @4.905s └─systemd-update-utmp.service @4.864s+39ms └─auditd.service @4.563s+301ms └─systemd-tmpfiles-setup.service @4.485s+69ms └─rhel-import-state.service @4.342s+142ms └─local-fs.target @4.324s └─boot.mount @4.286s+31ms └─systemd-fsck@dev-disk-by\x2duuid-79f594ad\x2da332\x2d4730\x2dbb5f\x2d85d19608096 └─dev-disk-by\x2duuid-79f594ad\x2da332\x2d4730\x2dbb5f\x2d85d196080964.device@4 重要:Systemctl接受服务(.service),挂载点(.mount),套接口(.socket)和设备(.device)作为单元。 7. 列出所有可用单元 # systemctl list-unit-files UNIT FILE STATE proc-sys-fs-binfmt_misc.automount static dev-hugepages.mount static dev-mqueue.mount static proc-sys-fs-binfmt_misc.mount static sys-fs-fuse-connections.mount static sys-kernel-config.mount static sys-kernel-debug.mount static tmp.mount disabled brandbot.path disabled ..... 8. 列出所有运行中单元 # systemctl list-units UNIT LOAD ACTIVE SUB DESCRIPTION proc-sys-fs-binfmt_misc.automount loaded active waiting ArbitraryExecutableFileFormatsFileSyste sys-devices-pc...0-1:0:0:0-block-sr0.device loaded active plugged VBOX_CD-ROM sys-devices-pc...:00:03.0-net-enp0s3.device loaded active plugged PRO/1000 MT DesktopAdapter sys-devices-pc...00:05.0-sound-card0.device loaded active plugged 82801AA AC'97 Audio Controller sys-devices-pc...:0:0-block-sda-sda1.device loaded active plugged VBOX_HARDDISK sys-devices-pc...:0:0-block-sda-sda2.device loaded active plugged LVM PV Qzyo3l-qYaL-uRUa-Cjuk-pljo-qKtX-VgBQ8 sys-devices-pc...0-2:0:0:0-block-sda.device loaded active plugged VBOX_HARDDISK sys-devices-pl...erial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0 sys-devices-pl...erial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1 sys-devices-pl...erial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2 sys-devices-pl...erial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3 sys-devices-virtual-block-dm\x2d0.device loaded active plugged /sys/devices/virtual/block/dm-0 sys-devices-virtual-block-dm\x2d1.device loaded active plugged /sys/devices/virtual/block/dm-1 sys-module-configfs.device loaded active plugged /sys/module/configfs ... 9. 列出所有失败单元 # systemctl --failed UNIT LOAD ACTIVE SUB DESCRIPTION kdump.service loaded failed failed Crash recovery kernel arming LOAD =Reflects whether the unit definition was properly loaded. ACTIVE =The high-level unit activation state, i.e. generalization of SUB. SUB =The low-level unit activation state, values depend on unit type. 1 loaded units listed.Pass--all to see loaded but inactive units, too. To show all installed unit files use'systemctl list-unit-files'. 10. 检查某个单元(如 cron.service)是否启用 # systemctl is-enabled crond.service enabled 11. 检查某个单元或服务是否运行 # systemctl status firewalld.service firewalld.service - firewalld -dynamic firewall daemon Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled) Active: active (running) since Tue2015-04-2816:27:55 IST;34min ago Main PID:549(firewalld) CGroup:/system.slice/firewalld.service └─549/usr/bin/python -Es/usr/sbin/firewalld --nofork --nopid Apr2816:27:51 tecmint systemd[1]:Starting firewalld -dynamic firewall daemon... Apr2816:27:55 tecmint systemd[1]:Started firewalld -dynamic firewall daemon. 使用Systemctl控制并管理服务 12. 列出所有服务(包括启用的和禁用的) # systemctl list-unit-files --type=service UNIT FILE STATE arp-ethers.service disabled auditd.service enabled autovt@.service disabled blk-availability.service disabled brandbot.service static collectd.service disabled console-getty.service disabled console-shell.service disabled cpupower.service disabled crond.service enabled dbus-org.Fedoraproject.FirewallD1.service enabled .... 13. Linux中如何启动、重启、停止、重载服务以及检查服务(如 httpd.service)状态 # systemctl start httpd.service # systemctl restart httpd.service # systemctl stop httpd.service # systemctl reload httpd.service # systemctl status httpd.service httpd.service -TheApache HTTP Server Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled) Active: active (running) since Tue2015-04-2817:21:30 IST;6s ago Process:2876ExecStop=/bin/kill -WINCH ${MAINPID}(code=exited, status=0/SUCCESS) Main PID:2881(httpd) Status:"Processing requests..." CGroup:/system.slice/httpd.service ├─2881/usr/sbin/httpd -DFOREGROUND ├─2884/usr/sbin/httpd -DFOREGROUND ├─2885/usr/sbin/httpd -DFOREGROUND ├─2886/usr/sbin/httpd -DFOREGROUND ├─2887/usr/sbin/httpd -DFOREGROUND └─2888/usr/sbin/httpd -DFOREGROUND Apr2817:21:30 tecmint systemd[1]:StartingTheApache HTTP Server... Apr2817:21:30 tecmint httpd[2881]: AH00558: httpd:Couldnot reliably determine the server's fully q...ssage Apr 28 17:21:30 tecmint systemd[1]: Started The Apache HTTP Server. Hint: Some lines were ellipsized, use -l to show in full. 注意:当我们使用systemctl的start,restart,stop和reload命令时,我们不会从终端获取到任何输出内容,只有status命令可以打印输出。 14. 如何激活服务并在启动时启用或禁用服务(即系统启动时自动启动服务) # systemctl is-active httpd.service # systemctl enable httpd.service # systemctl disable httpd.service 15. 如何屏蔽(让它不能启动)或显示服务(如 httpd.service) # systemctl mask httpd.service ln -s '/dev/null''/etc/systemd/system/httpd.service' # systemctl unmask httpd.service rm '/etc/systemd/system/httpd.service' 16. 使用systemctl命令杀死服务 # systemctl kill httpd # systemctl status httpd httpd.service -TheApache HTTP Server Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled) Active: failed (Result:exit-code) since Tue2015-04-2818:01:42 IST;28min ago Main PID:2881(code=exited, status=0/SUCCESS) Status:"Total requests: 0; Current requests/sec: 0; Current traffic: 0 B/sec" Apr2817:37:29 tecmint systemd[1]: httpd.service:Got notification message from PID 2881, but recepti...bled. Apr2817:37:29 tecmint systemd[1]: httpd.service:Got notification message from PID 2881, but recepti...bled. Apr2817:37:39 tecmint systemd[1]: httpd.service:Got notification message from PID 2881, but recepti...bled. Apr2817:37:39 tecmint systemd[1]: httpd.service:Got notification message from PID 2881, but recepti...bled. Apr2817:37:49 tecmint systemd[1]: httpd.service:Got notification message from PID 2881, but recepti...bled. Apr2817:37:49 tecmint systemd[1]: httpd.service:Got notification message from PID 2881, but recepti...bled. Apr2817:37:59 tecmint systemd[1]: httpd.service:Got notification message from PID 2881, but recepti...bled. Apr2817:37:59 tecmint systemd[1]: httpd.service:Got notification message from PID 2881, but recepti...bled. Apr2818:01:42 tecmint systemd[1]: httpd.service: control process exited, code=exited status=226 Apr2818:01:42 tecmint systemd[1]:Unit httpd.service entered failed state. Hint:Some lines were ellipsized,use-l to show in full. 使用Systemctl控制并管理挂载点 17. 列出所有系统挂载点 # systemctl list-unit-files --type=mount UNIT FILE STATE dev-hugepages.mount static dev-mqueue.mount static proc-sys-fs-binfmt_misc.mount static sys-fs-fuse-connections.mount static sys-kernel-config.mount static sys-kernel-debug.mount static tmp.mount disabled 18. 挂载、卸载、重新挂载、重载系统挂载点并检查系统中挂载点状态 # systemctl start tmp.mount # systemctl stop tmp.mount # systemctl restart tmp.mount # systemctl reload tmp.mount # systemctl status tmp.mount tmp.mount -TemporaryDirectory Loaded: loaded (/usr/lib/systemd/system/tmp.mount; disabled) Active: active (mounted) since Tue2015-04-2817:46:06 IST;2min48s ago Where:/tmp What: tmpfs Docs: man:hier(7) http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems Process:3908ExecMount=/bin/mount tmpfs /tmp -t tmpfs -o mode=1777,strictatime (code=exited, status=0/SUCCESS) Apr2817:46:06 tecmint systemd[1]:MountingTemporaryDirectory... Apr2817:46:06 tecmint systemd[1]: tmp.mount:Directory/tmp to mount over isnot empty, mounting anyway. Apr2817:46:06 tecmint systemd[1]:MountedTemporaryDirectory. 19. 在启动时激活、启用或禁用挂载点(系统启动时自动挂载) # systemctl is-active tmp.mount # systemctl enable tmp.mount # systemctl disable tmp.mount 20. 在Linux中屏蔽(让它不能启用)或可见挂载点 # systemctl mask tmp.mount ln -s '/dev/null''/etc/systemd/system/tmp.mount' # systemctl unmask tmp.mount rm '/etc/systemd/system/tmp.mount' 使用Systemctl控制并管理套接口 21. 列出所有可用系统套接口 # systemctl list-unit-files --type=socket UNIT FILE STATE dbus.socket static dm-event.socket enabled lvm2-lvmetad.socket enabled rsyncd.socket disabled sshd.socket disabled syslog.socket static systemd-initctl.socket static systemd-journald.socket static systemd-shutdownd.socket static systemd-udevd-control.socket static systemd-udevd-kernel.socket static 11 unit files listed. 22. 在Linux中启动、重启、停止、重载套接口并检查其状态 # systemctl start cups.socket # systemctl restart cups.socket # systemctl stop cups.socket # systemctl reload cups.socket # systemctl status cups.socket cups.socket - CUPS PrintingServiceSockets Loaded: loaded (/usr/lib/systemd/system/cups.socket; enabled) Active: active (listening) since Tue2015-04-2818:10:59 IST;8s ago Listen:/var/run/cups/cups.sock (Stream) Apr2818:10:59 tecmint systemd[1]:Starting CUPS PrintingServiceSockets. Apr2818:10:59 tecmint systemd[1]:Listening on CUPS PrintingServiceSockets. 23. 在启动时激活套接口,并启用或禁用它(系统启动时自启动) # systemctl is-active cups.socket # systemctl enable cups.socket # systemctl disable cups.socket 24. 屏蔽(使它不能启动)或显示套接口 # systemctl mask cups.socket ln -s '/dev/null''/etc/systemd/system/cups.socket' # systemctl unmask cups.socket rm '/etc/systemd/system/cups.socket' 服务的CPU利用率(分配额) 25. 获取当前某个服务的CPU分配额(如httpd) # systemctl show -p CPUShares httpd.service CPUShares=1024 注意:各个服务的默认CPU分配份额=1024,你可以增加/减少某个进程的CPU分配份额。 26. 将某个服务(httpd.service)的CPU分配份额限制为2000 CPUShares/ # systemctl set-property httpd.service CPUShares=2000 # systemctl show -p CPUShares httpd.service CPUShares=2000 注意:当你为某个服务设置CPUShares,会自动创建一个以服务名命名的目录(如 httpd.service),里面包含了一个名为90-CPUShares.conf的文件,该文件含有CPUShare限制信息,你可以通过以下方式查看该文件: # vi /etc/systemd/system/httpd.service.d/90-CPUShares.conf [Service] CPUShares=2000 27. 检查某个服务的所有配置细节 # systemctl show httpd Id=httpd.service Names=httpd.service Requires=basic.target Wants=system.slice WantedBy=multi-user.target Conflicts=shutdown.target Before=shutdown.target multi-user.target After=network.target remote-fs.target nss-lookup.target systemd-journald.socket basic.target system.slice Description=TheApache HTTP Server LoadState=loaded ActiveState=active SubState=running FragmentPath=/usr/lib/systemd/system/httpd.service .... 28. 分析某个服务(httpd)的关键链 # systemd-analyze critical-chain httpd.service The time after the unit is active or started is printed after the "@" character. The time the unit takes to start is printed after the "+" character. httpd.service +142ms └─network.target @11.168s └─network.service @9.456s+1.712s └─NetworkManager.service @8.858s+596ms └─firewalld.service @4.931s+3.926s └─basic.target @4.916s └─sockets.target @4.916s └─dbus.socket @4.916s └─sysinit.target @4.905s └─systemd-update-utmp.service @4.864s+39ms └─auditd.service @4.563s+301ms └─systemd-tmpfiles-setup.service @4.485s+69ms └─rhel-import-state.service @4.342s+142ms └─local-fs.target @4.324s └─boot.mount @4.286s+31ms └─systemd-fsck@dev-disk-by\x2duuid-79f594ad\x2da332\x2d4730\x2dbb5f\x2d85d196080964.service@4.092s+149ms └─dev-disk-by\x2duuid-79f594ad\x2da332\x2d4730\x2dbb5f\x2d85d196080964.device@4.092s 29. 获取某个服务(httpd)的依赖性列表 # systemctl list-dependencies httpd.service httpd.service ├─system.slice └─basic.target ├─firewalld.service ├─microcode.service ├─rhel-autorelabel-mark.service ├─rhel-autorelabel.service ├─rhel-configure.service ├─rhel-dmesg.service ├─rhel-loadmodules.service ├─paths.target ├─slices.target │├─-.slice │└─system.slice ├─sockets.target │├─dbus.socket .... 30. 按等级列出控制组 # systemd-cgls ├─1/usr/lib/systemd/systemd --switched-root --system --deserialize 23 ├─user.slice │└─user-0.slice │└─session-1.scope │├─2498 sshd: root@pts/0 │├─2500-bash │├─4521 systemd-cgls │└─4522 systemd-cgls └─system.slice ├─httpd.service │├─4440/usr/sbin/httpd -DFOREGROUND │├─4442/usr/sbin/httpd -DFOREGROUND │├─4443/usr/sbin/httpd -DFOREGROUND │├─4444/usr/sbin/httpd -DFOREGROUND │├─4445/usr/sbin/httpd -DFOREGROUND │└─4446/usr/sbin/httpd -DFOREGROUND ├─polkit.service │└─721/usr/lib/polkit-1/polkitd --no-debug .... 31. 按CPU、内存、输入和输出列出控制组 # systemd-cgtop PathTasks%CPU MemoryInput/s Output/s /831.0437.8M-- /system.slice -0.1--- /system.slice/mariadb.service 20.1--- /system.slice/tuned.service 10.0--- /system.slice/httpd.service 60.0--- /system.slice/NetworkManager.service 1---- /system.slice/atop.service 1---- /system.slice/atopacct.service 1---- /system.slice/auditd.service 1---- /system.slice/crond.service 1---- /system.slice/dbus.service 1---- /system.slice/firewalld.service 1---- /system.slice/lvm2-lvmetad.service 1---- /system.slice/polkit.service 1---- /system.slice/postfix.service 3---- /system.slice/rsyslog.service 1---- /system.slice/system-getty.slice/getty@tty1.service 1---- /system.slice/systemd-journald.service 1---- /system.slice/systemd-logind.service 1---- /system.slice/systemd-udevd.service 1---- /system.slice/webmin.service 1---- /user.slice/user-0.slice/session-1.scope3---- 控制系统运行等级 32. 启动系统救援模式 # systemctl rescue Broadcast message from root@tecmint on pts/0(Wed2015-04-2911:31:18 IST): The system is going down to rescue mode NOW! 33. 进入紧急模式 # systemctl emergency Welcome to emergency mode!After logging in, type "journalctl -xb" to view system logs,"systemctl reboot" to reboot,"systemctl default" to try again to boot intodefault mode. 34. 列出当前使用的运行等级 # systemctl get-default multi-user.target 35. 启动运行等级5,即图形模式 # systemctl isolate runlevel5.target 或 # systemctl isolate graphical.target 36. 启动运行等级3,即多用户模式(命令行) # systemctl isolate runlevel3.target 或 # systemctl isolate multiuser.target 36. 设置多用户模式或图形模式为默认运行等级 # systemctl set-default runlevel3.target # systemctl set-default runlevel5.target 37. 重启、停止、挂起、休眠系统或使系统进入混合睡眠 # systemctl reboot # systemctl halt # systemctl suspend # systemctl hibernate # systemctl hybrid-sleep 对于不知运行等级为何物的人,说明如下。 Runlevel 0 : 关闭系统 Runlevel 1 : 救援?维护模式 Runlevel 3 : 多用户,无图形系统 Runlevel 4 : 多用户,无图形系统 Runlevel 5 : 多用户,图形化系统 Runlevel 6 : 关闭并重启机器 到此为止吧。保持连线,进行评论。别忘了在下面的评论中为我们提供一些有价值的反馈哦。喜欢我们、与我们分享,求扩散。 教大家几个基本systemctl的用法:http://www.linuxdiyf.com/linux/11642.html CentOS 7上systemctl的用法:http://www.linuxdiyf.com/linux/3800.html 在CentOS 7上利用systemctl添加自定义系统服务:http://www.linuxdiyf.com/linux/1075.html 转自:http://www.linuxdiyf.com/linux/13088.html |