pb中POS的各种外设处理

CSDN首页

新闻

论坛

小组

Blog

文档

下载

读书

Tag

网摘

搜索

.NET

Java

游戏

视频

人才

外包

第二书店

程序员

 

CSDN社区 >  PowerBuilder >  API 调用

关于POS的各种外设处理（包括打印机、钱箱等）

现把POS的各种外设处理整理如下，可能还有许多不全或者代码不正确的地方，望大家补充且指证  
  POS的外设包括打印机、钱箱、顾显、卡、扫码枪和扫码平台。  
  一般的外设编程可以通过PB通过的串口编程，也有部分特殊的，可由厂家直接提供技术支持。  
  各种外设如果接的是COM，必须在打开的时候，让其初始化，一般卡可在刷卡的时候再初始化，刷卡结束后，再把COM口关闭。因为如果COM已被某一外设打开，另一外设将不可用，即COM口是独占的。  
  一、打印机  
  POS的外设包括打印机、钱箱、顾显、卡、扫码枪和扫码平台。  
  一般的外设编程可以通过PB通过的串口编程，也有部分特殊的，可由厂家直接提供技术支持。  
  各种外设如果接的是COM，必须在打开的时候，让其初始化，一般卡可在刷卡的时候再初始化，刷卡结束后，再把COM口关闭。因为如果COM已被某一外设打开，另一外设将不可用，即COM口是独占的。  
  一、打印机  
  申明  
  /*210D´串口打印*/  
  Function   boolean   OpenSerPort(int   iPt)   LIBRARY   "prndll.dll"       //打开串口  
  Function   boolean   ClosePort()   LIBRARY   "prndll.dll"   //关闭串口  
  Function   boolean   SendPData(string   pData,int   iDataLen)   LIBRARY   "prndll.dll"   //发送打印命令  
  Function   boolean   OpenPrnDrawer()   LIBRARY   "prndll.dll"   //开钱箱  
  Function   boolean   TM210D_Init()   LIBRARY   "prndll.dll"   //打印初始化串口  
  Function   boolean   TM210D_PrnCnEn(int   iColor,string   pData,int   iDataLen)   LIBRARY   "prndll.dll"   //向打印机从软字库（串口）  
  Function   boolean   OpenPalPort(int   iPt)   LIBRARY   "prndll.dll"   //´打开并口  
  Function   boolean   TM210PD_PrnCnEn(int   iColor,string   pData,int   iDataLen)   LIBRARY   "prndll.dll"   //向打印机从软字库（并口）  
  1、打印机初始化（可在OPEN事件中写）  
  gs_system_qt.ls_printtype：为打印机型号  
  OLE_print：为Microsoft   Communication   control控件（装VB6后，此控件可见）  
  gs_system_qt.ls_pagewidth：打印纸的宽度  
  ls_printstr：送入打印机的字符  
  //初始化串口打印机  
  choose   case   gs_system_qt.ls_printtype  
  case   'IBM   Sure   one   4614'  
  w_main.OLE_print.Object.RTSenable   =   true  
  w_main.OLE_print.Object.handshaking   =   2  
  w_main.OLE_print.Object.CommPort   =   3  
  w_main.OLE_print.Object.PortOpen   =   True  
  case   'TP   POS2000'  
  choose   case   gs_system_qt.ls_printport  
  case   'COM1'  
  li_printport   =   1  
  case   'COM2'  
  li_printport   =   2  
  case   'COM3'  
  li_printport   =   3  
  case   'COM4'  
  li_printport   =   4  
  case   'COM5'  
  li_printport   =   5  
  case   'COM6'  
  li_printport   =   6  
  case   else    
  li_printport   =   1  
  end   choose    
  if   li_printport   >=1   and   li_printport   <=6   then      
  w_main.OLE_print.Object.RTSenable   =   true  
  w_main.OLE_print.Object.handshaking   =   2  
  w_main.OLE_print.Object.CommPort   =   li_printport  
  w_main.OLE_print.Object.PortOpen   =   True  
  end   if  
  end   choose  
  end   if  
  //此处判断如果打印机不是“IBM   Sure   one   4614”，但是钱箱是“IBM   Sure   one   4614”的  
  if   gs_system_qt.ls_printtype   <>   'IBM   Sure   one   4614'   then    
  if     gs_system_qt.ls_moneyboxport   =   'IBM   Sure   one   4614'   then    
  w_main.OLE_print.Object.RTSenable   =   true  
  w_main.OLE_print.Object.handshaking   =   2  
  w_main.OLE_print.Object.CommPort   =   3  
  w_main.OLE_print.Object.PortOpen   =   True  
  end   if  
  end   if  
  问题点数：100、回复次数：24Top

2、打印小票（各个变量是要打印出来的数据，主要提供各种打印回车、换行、空格应该送那些字符）  
  choose   case   gs_system_qt.ls_printtype  
  case   'Epson   210AM'  
  choose   case   gs_system_qt.ls_pagewidth  
  case   '75mm'  
  //判断一个商品打印几行  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then  
  ls_printstr   =   ls_printstr   +   left(ls_GoodsNameS+space(18),18)   +   Space(7   -   Len(String(ldec_num,"###0.000")))   +   String(ldec_num,"###0.000")   +   Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*   ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_printstr   =   ls_printstr   +   left(ls_goodscode+space(18),18)   +   Space(7   -   Len(String(ldec_num,"###0.000")))   +   String(ldec_num,"###0.000")+   Space(7   -Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")   +   Space(7   -   Len(String(ldec_disretailprice   *   ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  case   '57mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_GoodsNames+space(14),14)   +   Space(4   -   Len(String(ldec_num,"###0")))   +   String(ldec_num,"###0")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7   -   Len(String(ldec_disretailprice   *   ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else    
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname   +   Char(13)   +   Char(10)  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_goodscode+space(14),14)   +   Space(4   -   Len(String(ldec_num,"###0")))+String(ldec_num,"###0")+Space(7-Len(String(ldec_disretailprice,"###0.00")))   +   String(ldec_disretailprice,"###0.00")   +   Space(7   -   Len(String(ldec_disretailprice   *   ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  end   choose  
  case   'Partner   ADP   300'  
  choose   case   gs_system_qt.ls_pagewidth  
  case   '75mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then    
  ls_printstr   =   ls_printstr   +   left(ls_GoodsNameS+space(18),18)   +   Space(7   -   Len(String(ldec_num,"###0.000")))+String(ldec_num,"###0.000")+Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_printstr   =   ls_printstr   +   left(ls_goodscode+space(18),18)   +   Space(7   -   Len(String(ldec_num,"###0.000")))+String(ldec_num,"###0.000")+Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  case   '57mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then    
  ls_PrintStr   =   ls_PrintStr   +   left(ls_GoodsNames+space(14),14)   +   Space(4   -Len(String(ldec_num,"###0")))+String(ldec_num,"###0")+Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice*ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_goodscode+space(14),14)   +   Space(4   -   Len(String(ldec_num,"###0")))   +   String(ldec_num,"###0")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  end   choose  
   
  case   'TX-210K'  
  choose   case   gs_system_qt.ls_pagewidth  
  case   '75mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then    
  ls_printstr   =   ls_printstr   +   left(ls_GoodsNameS+space(18),18)   +   Space(7   -   Len(String(ldec_num,"###0.000")))+String(ldec_num,"###0.000")   +   Space(7   -Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")   +   Space(7   -   Len(String(ldec_disretailprice   *   ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_printstr   =   ls_printstr   +   left(ls_goodscode+space(18),18)   +   Space(7   -   Len(String(ldec_num,"###0.000")))   +String(ldec_num,"###0.000")   +   Space(7   -Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")   +   Space(7   -   Len(String(ldec_disretailprice   *   ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  case   '57mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_GoodsNames+space(14),14)   +   Space(4   -   Len(String(ldec_num,"###0")))+String(ldec_num,"###0")+Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else  
  ls_printstr=ls_printstr+left(string(li_id)+space(4),4)+ls_goodsname   +   Char(13)   +   Char(10)  
  ls_PrintStr=ls_PrintStr+left(ls_goodscode+space(14),14)+Space(4-Len(String(ldec_num,"###0")))+String(ldec_num,"###0")+Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  end   choose   
 

 

case   'DIY   POS58'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then    
  ls_PrintStr   =   ls_PrintStr   +   left(ls_GoodsNames+space(10),10)   +   Space(8   -   Len(String(ldec_num,"###0.00")))   +   String(ldec_num,"###0.00")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))   +   String(ldec_disretailprice,"###0.00")   +   Space(7   -   Len(String(ldec_disretailprice   *   ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)     +   Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_goodscode+space(10),10)   +   Space(8   -   Len(String(ldec_num,"###0.00")))   +   String(ldec_num,"###0.00")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))   +   String(ldec_disretailprice,"###0.00")   +   Space(7   -   Len(String(ldec_disretailprice   *   ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  case   'IBM   Sure   one   4614'  
  choose   case   gs_system_qt.ls_pagewidth  
  case   '75mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then   //  
  ls_printstr   =   ls_printstr   +   left(ls_GoodsNameS+space(18),18)   +   Space(7   -   Len(String(ldec_num,"###0.000")))   +   String(ldec_num,"###0.000")   +   Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_printstr   =   ls_printstr   +   left(ls_goodscode+space(18),18)   +   Space(7   -   Len(String(ldec_num,"###0.000")))   +   String(ldec_num,"###0.000")   +   Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  case   '57mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then    
  ls_PrintStr   =   ls_PrintStr   +   left(ls_GoodsNames+space(14),14)   +   Space(4   -   Len(String(ldec_num,"###0")))   +   String(ldec_num,"###0")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice*ldec_num,"####0.00")+Char(13)+Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_goodscode+space(14),14)   +   Space(4   -   Len(String(ldec_num,"###0")))   +   String(ldec_num,"###0")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  end   choose  
   
  w_main.OLE_print.Object.Output   =   ls_printstr  
  do   While   w_main.OLE_print.Object.OutBufferCount()   >   0  
  Yield()  
  Loop  
  ls_printstr=   ''  
  case   '海信P110DM'  
  choose   case   gs_system_qt.ls_pagewidth  
  case   '75mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then   //  
  ls_printstr   =   ls_printstr   +   left(ls_GoodsNameS+space(18),18)   +   Space(7-Len(String(ldec_num,"###0.000")))+String(ldec_num,"###0.000")+Space(7-Len(String(ldec_disretailprice,"###0.00")))   +   String(ldec_disretailprice,"###0.00")   +   Space(7   -   Len(String(ldec_disretailprice   *   ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_printstr   =   ls_printstr   +   left(ls_goodscode+space(18),18)   +   Space(7-Len(String(ldec_num,"###0.000")))+String(ldec_num,"###0.000")+Space(7-Len(String(ldec_disretailprice,"###0.00")))   +   String(ldec_disretailprice,"###0.00")   +   Space(7   -   Len(String(ldec_disretailprice   *   ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  case   '57mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_GoodsNames+space(14),14)   +Space(4-Len(String(ldec_num,"###0")))+String(ldec_num,"###0")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))   +   String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_goodscode+space(14),14)   +   Space(4-Len(String(ldec_num,"###0")))+String(ldec_num,"###0")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))   +   String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  end   choose  
  case   '桑达PT2000'  
  choose   case   gs_system_qt.ls_pagewidth  
  case   '75mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then  
  ls_printstr   =   ls_printstr   +   left(ls_GoodsNameS+space(18),18)   +   Space(7-Len(String(ldec_num,"###0.000")))+String(ldec_num,"###0.000")+Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else    
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_printstr   =   ls_printstr   +   left(ls_goodscode+space(18),18)   +   Space(7-Len(String(ldec_num,"###0.000")))+String(ldec_num,"###0.000")+Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  case   '57mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then    
  ls_PrintStr   =   ls_PrintStr   +   left(ls_GoodsNames+space(14),14)   +Space(4-Len(String(ldec_num,"###0")))+String(ldec_num,"###0")+   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))   +   String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else    
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_goodscode+space(14),14)   +   Space(4-Len(String(ldec_num,"###0")))+String(ldec_num,"###0")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))   +   String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  end   choose   
 

case   'TP   POS2000'  
  choose   case   gs_system_qt.ls_pagewidth  
  case   '75mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then  
  ls_printstr   =   ls_printstr   +   left(ls_GoodsNameS+space(18),18)   +   Space(7   -   Len(String(ldec_num,"###0.000")))+String(ldec_num,"###0.000")+Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_printstr   =   ls_printstr   +   left(ls_goodscode+space(18),18)   +   Space(7   -   Len(String(ldec_num,"###0.000")))+String(ldec_num,"###0.000")+Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  case   '57mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_GoodsNames+space(14),14)   +   Space(4   -   Len(String(ldec_num,"###0")))   +   String(ldec_num,"###0")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_goodscode+space(14),14)   +   Space(4   -   Len(String(ldec_num,"###0")))   +   String(ldec_num,"###0")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
    end   choose  
  w_main.OLE_print.Object.Output   =   ls_printstr  
  do   While   w_main.OLE_print.Object.OutBufferCount()   >   0  
  Yield()  
  Loop  
  ls_printstr=   ''  
  case   else   //75mm  
  choose   case   gs_system_qt.ls_pagewidth  
  case   '75mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then    
  ls_printstr=ls_printstr+left(ls_GoodsNameS+space(18),18)+Space(7-Len(String(ldec_num,"###0.000")))+String(ldec_num,"###0.000")+   Space(7   -Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice*ldec_num,"####0.00")+Char(13)+Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_printstr   =   ls_printstr   +   left(ls_goodscode+space(18),18)   +   Space(7-   Len(String(ldec_num,"###0.000")))+String(ldec_num,"###0.000")+Space(7-Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  case   '57mm'  
  if   gs_system_qt.li_GoodsPrintrow   =   1   then  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_GoodsNames+space(14),14)   +   Space(4   -Len(String(ldec_num,"###0")))   +   String(ldec_num,"###0")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))+String(ldec_disretailprice*ldec_num,"####0.00")+Char(13)+Char(10)  
  else  
  ls_printstr   =   ls_printstr   +   left(string(li_id)+space(4),4)   +   ls_goodsname     +   Char(13)   +   Char(10)  
  ls_PrintStr   =   ls_PrintStr   +   left(ls_goodscode+space(14),14)   +   Space(4   -   Len(String(ldec_num,"###0")))   +   String(ldec_num,"###0")   +   Space(7   -   Len(String(ldec_disretailprice,"###0.00")))+String(ldec_disretailprice,"###0.00")+Space(7-Len(String(ldec_disretailprice*ldec_num,"####0.00")))   +   String(ldec_disretailprice   *   ldec_num,"####0.00")   +   Char(13)   +   Char(10)  
  end   if  
  end   choose  
  end   choose  
  Top

//添加回车换行  
  ls_printstr   =   ls_printstr   +   char(13)   +   char(10)  
  //判断打印机型号  
  choose   case   gs_system_qt.ls_printtype  
  case   'IBM   Sure   one   4614'  
  w_main.OLE_print.Object.Output   =   ls_printstr  
  do   While   w_main.OLE_print.Object.OutBufferCount()   >   0  
  Yield()  
  Loop  
  ls_printstr=   ''  
  case   else  
  //  
  end   choose  
  end   if    
  //打印口  
  int   li_printport  
  choose   case   gs_system_qt.ls_printport  
  case   'COM1'  
  li_printport   =   1  
  case   'COM2'  
  li_printport   =   2  
  case   'COM3'  
  li_printport   =   3  
  case   'COM4'  
  li_printport   =   4  
  case   'COM5'  
  li_printport   =   5  
  case   'COM6'  
  li_printport   =   6  
  case   'LPT1'  
  li_printport   =   7  
  case   'LPT2'  
  li_printport   =   8  
  case   else    
  li_printport   =   1  
  end   choose    
   
   
   
  //发送打印命令  
  choose   case   gs_system_qt.ls_printtype  
  case   'Epson   210PD'  
  choose   case   gs_system_qt.li_windrive  
  case   1   //使用打印驱动  
  job   =   PrintOpen()  
  Print(job,ls_PrintStr)  
  PrintClose(job)  
  case   -1   //不使用打印驱动  
  //打开端口  
  if   li_printport   =   7   or   li_printport   =   8   then   //&sup2;&cent;&iquest;&Uacute;  
  choose   case   li_printport    
  case   7  
  li_printport   =   1  
  case   8  
  li_printport   =   2  
  end   choose  
  OpenPalPort(li_printport)   //打开并口  
  else   //打开串口  
  OpenSerPort(li_printport)     //&acute;ò&iquest;&ordf;&acute;&reg;&iquest;&Uacute;  
  end   if  
  TM210D_PrnCnEn(1,ls_printstr,len(ls_printstr))//&Iuml;ò&acute;ò&Oacute;&iexcl;&raquo;ú&acute;&Oacute;&Egrave;í×&Ouml;&iquest;&acirc;&sup2;&cent;&acute;ò&Oacute;&iexcl;  
  ClosePort()   //关闭串口  
  end   choose  
  case   'Epson   210AM'  
  //退一行  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  choose   case   gs_system_qt.li_windrive  
  case   1    
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  job   =   PrintOpen()  
  PrintSend(job,ls_PrintStr)  
  PrintClose(job)  
  case   -1    
  li_FileNum=FileOpen(gs_system_qt.ls_printport,LineMode!,Write!,   LockWrite!,   Append!)  
  FileWrite(li_FileNum,ls_printstr)  
  FileClose(li_FileNum)  
  end   choose  
  case   'Partner   ADP   300'  
  choose   case   gs_system_qt.li_windrive  
  case   1    
  job   =   PrintOpen()  
  PrintSend(job,ls_PrintStr)  
  PrintClose(job)  
  case   -1    
  li_FileNum   =   FileOpen(gs_system_qt.ls_printport,LineMode!,   Write!,   LockWrite!,   Append!)  
  FileWrite(li_FileNum,ls_printstr)  
  FileClose(li_FileNum)  
  end   choose  
  case   'TX-210K'  
  //退一行  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  choose   case   gs_system_qt.li_windrive  
  case   1  
  job   =   PrintOpen()  
  PrintSend(job,ls_PrintStr)  
  PrintClose(job)  
  case   -1  
  li_FileNum   =   FileOpen(gs_system_qt.ls_printport,LineMode!,   Write!,   LockWrite!,   Append!)  
  FileWrite(li_FileNum,ls_printstr)  
  FileClose(li_FileNum)  
  end   choose  
  case   'IBM   Sure   one   4614'  
  w_main.OLE_print.Object.Output   =   ls_printstr  
  do   While   w_main.OLE_print.Object.OutBufferCount()   >   0  
  Yield()  
  Loop  
  case   '&ordm;海信P110DM'  
  //退一行  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  choose   case   gs_system_qt.li_windrive  
  case   1&macr;  
  job   =   PrintOpen()  
  PrintSend(job,ls_PrintStr)  
  PrintClose(job)  
  case   -1  
  li_FileNum   =   FileOpen(gs_system_qt.ls_printport,LineMode!,   Write!,   LockWrite!,   Append!)  
  FileWrite(li_FileNum,ls_printstr)  
  FileClose(li_FileNum)  
  end   choose  
  case   ‘桑达PT2000'  
  //退一行  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  choose   case   gs_system_qt.li_windrive  
  case   1    
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  job   =   PrintOpen()  
  PrintSend(job,ls_PrintStr)  
  PrintClose(job)  
  case   -1  
  li_FileNum   =   FileOpen(gs_system_qt.ls_printport,LineMode!,   Write!,   LockWrite!,   Append!)  
  FileWrite(li_FileNum,ls_printstr)  
  FileClose(li_FileNum)  
  end   choose  
  case   'TP   POS2000'  
  if   li_printport   >=1   and   li_printport   <=6   then     /  
  w_main.OLE_print.Object.Output   =   ls_printstr  
  do   While   w_main.OLE_print.Object.OutBufferCount()   >   0  
  Yield()  
  Loop  
  end   if  
  case   else  
  choose   case   gs_system_qt.li_windrive  
  case   1    
  job   =   PrintOpen()  
  PrintSend(job,ls_PrintStr)  
  PrintClose(job)  
  case   -1    
  li_FileNum   =   FileOpen(gs_system_qt.ls_printport,LineMode!,   Write!,   LockWrite!,   Append!)  
  FileWrite(li_FileNum,ls_printstr)  
  FileClose(li_FileNum)  
  end   choose  
  end   choose  
  Top

二、钱箱  
  与打印机密切关联的就是钱箱，在软件里面，我们关字符到打印机，由打印机打开钱箱  
  申明  
  //桑达CR-3000A(并口)钱箱使用  
  Function   int   opend(   long   t1,long   t2,long   port   )   LIBRARY   "qxdll.dll"   //开钱箱opend(500,500,LPT2的十进制地址&#8226;)  
  Function   int   posi   (long   port   )   LIBRARY   "qxdll.dll"   //钱箱状态  
  /*海信HK588系列钱箱使用*/  
  Function   int   InitMBDrawer(int   iType)   library   'adrawerdll.dll'   //初始化钱箱  
  Function   int   OpenMBDrawer(int   iType)   library   'adrawerdll.dll'   //开钱箱  
  //打印口  
  choose   case   gs_system_qt.ls_printport  
  case   'COM1'  
  li_printport   =   1  
  case   'COM2'  
  li_printport   =   2  
  case   'COM3'  
  li_printport   =   3  
  case   'COM4'  
  li_printport   =   4  
  case   'COM5'  
  li_printport   =   5  
  case   'COM6'  
  li_printport   =   6  
  case   'LPT1'  
  li_printport   =   7  
  case   'LPT2'  
  li_printport   =   8  
  case   else    
  li_printport   =   1  
  end   choose    
   
  choose   case   gs_system_qt.ls_moneyboxport  
  case   '打印口'  
  choose   case   gs_system_qt.ls_printtype  
  Case   "Epson   210PD"  
  choose   case   gs_system_qt.li_windrive  
  case   1   //使用WINDOW驱动  
  job   =   PrintOpen()  
  Print(job,ls_PrintStr)  
  PrintClose(job)  
  case   -1   //不使用WINDOW驱动  
  if   li_printport   =   7   or   li_printport   =   8   then   //并口  
  choose   case   li_printport    
  case   7  
  li_printport   =   1  
  case   8  
  li_printport   =   2  
  end   choose  
  OpenPalPort(li_printport)    
  else   //串口  
  OpenSerPort(li_printport)    
  end   if  
  OpenPrnDrawer()//开钱箱  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  TM210D_PrnCnEn(1,ls_printstr,len(ls_printstr))  
  ClosePort()  
  end   choose  
  Case   "Epson   210AM"  
  if   gs_system_qt.li_windrive   =   1   then  
  ls_printstr   =   ls_printstr   +   Char(27)+Char(64)  
  end   if  
  ls_printstr   =   ls_printstr   +   Char(27)+Char(112)+Char(0)+Char(48)    
  case   'Partner   ADP   300'  
  if   gs_system_qt.li_windrive   =   1   then  
  ls_printstr   =   ls_printstr   +   Char(27)+Char(64)  
  end   if  
  ls_printstr   =   ls_printstr   +   Char(27)+Char(112)+Char(0)+Char(48)  
  Case   "TX-210K"  
  if   gs_system_qt.li_windrive   =   1   then  
  ls_printstr=ls_printstr+char(27)+"p"+char(254)+char(60)+char(255)  
          ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(2)  
  else    
  ls_printstr=ls_printstr+Char(27)+Char(112)+Char(1)+Char(60)+char(255)                     end   if  
  Case   'DIY   POS58'  
  ls_printstr   =   ls_printstr     +   char(27)   +   'e'   +   char(1)  
  ls_printstr=ls_printstr+Char(27)+Char(112)+Char(1)+Char(60)+char(255)  
    Case   "桑达PT2000"  
  if   gs_system_qt.li_windrive   =   1   then  
  ls_printstr   =   ls_printstr   +   Char(27)+Char(64)  
  end   if  
  ls_printstr   =   ls_printstr   +   Char(27)+Char(112)+Char(0)+Char(48)   //&Ccedil;&reg;&Iuml;&auml;  
  case   'TP   POS2000'  
  ls_printstr   =   ls_printstr   +   Char(27)+Char(64)   //&acute;ò&Oacute;&iexcl;&raquo;ú&sup3;&otilde;&Ecirc;&frac14;&raquo;&macr;  
  ls_printstr   =   ls_printstr   +   Char(27)+Char(112)+Char(0)+Char(48)    
  Case   Else   //Epson   210AM  
  if   gs_system_qt.li_windrive   =   1   then  
      ls_printstr   =   ls_printstr   +   Char(27)+Char(64)  
  end   if  
  ls_printstr   =   ls_printstr   +   Char(27)+Char(112)+Char(0)+Char(48)    
  end   choose  
  //发送打印命令  
  choose   case   gs_system_qt.ls_printtype  
  case   'Epson   210AM'  
  choose   case   gs_system_qt.li_windrive  
  case   1    
  job   =   PrintOpen()  
  PrintSend(job,ls_PrintStr)  
  PrintClose(job)  
  case   -1  
  li_FileNum=FileOpen(gs_system_qt.ls_printport,LineMode!,   Write!,   LockWrite!,   Append!)  
  FileWrite(li_FileNum,ls_printstr)  
  FileClose(li_FileNum)  
  end   choose  
  case   'Partner   ADP   300'  
  choose   case   gs_system_qt.li_windrive  
  case   1    
  job   =   PrintOpen()  
  PrintSend(job,ls_PrintStr)  
  PrintClose(job)  
  case   -1   li_FileNum=FileOpen(gs_system_qt.ls_printport,LineMode!,   Write!,   LockWrite!,   Append!)  
  FileWrite(li_FileNum,ls_printstr)  
  FileClose(li_FileNum)  
  end   choose  
  case   'TX-210K'  
  choose   case   gs_system_qt.li_windrive  
  case   1    
  job   =   PrintOpen()  
  PrintSend(job,ls_PrintStr,254)  
  PrintClose(job)  
  case   -1  
  li_FileNum=FileOpen(gs_system_qt.ls_printport,LineMode!,   Write!,   LockWrite!,   Append!)  
  FileWrite(li_FileNum,ls_printstr)  
  FileClose(li_FileNum)  
  end   choose  
  case   'IBM   Sure   one   4614'  
  w_main.OLE_print.Object.Output   =   ls_printstr  
  do   While   w_main.OLE_print.Object.OutBufferCount()   >   0  
  Yield()  
  Loop  
  case   'TP   POS2000'  
  if   li_printport   >=1   and   li_printport   <=6   then     //±í&Atilde;÷&Ecirc;±&acute;&reg;&iquest;&Uacute;  
  w_main.OLE_print.Object.Output   =   ls_printstr  
  do   While   w_main.OLE_print.Object.OutBufferCount()   >   0  
  Yield()  
  Loop  
  end   if  
  case   else  
  choose   case   gs_system_qt.li_windrive  
  case   1   //使用WINDOW打印驱动  
  job   =   PrintOpen()  
  PrintSend(job,ls_PrintStr)  
  PrintClose(job)  
  case   -1  
  li_FileNum=FileOpen(gs_system_qt.ls_printport,LineMode!,   Write!,   LockWrite!,   Append!)  
  FileWrite(li_FileNum,ls_printstr)  
  FileClose(li_FileNum)  
  end   choose  
  end   choose  
  case   'IBM   Sure   one   4614'  
  isnull(ls_printstr)  
  ls_printstr   =   char(7)//   +   char(28)  
  w_main.OLE_print.Object.Output   =   ls_printstr  
  case   '海信FWD-1-T'  
  openmbdrawer(4)  
  case   '桑达'  
  opend(500,500,gs_system_qt.ll_moneyboxorder)  
  case   else    
  end   choose  
  end   if  

三、顾显  
  1、顾显初始化  
  function   Boolean   com_init(Int   com,int   baud)library   "api_com.dll"  
  function   Boolean   com_rest()   library   "api_com.dll"  
  function   Boolean   com_send(string   buf,int   len)library   "api_com.dll"  
  OLE_gx：为Microsoft   Communication   control控件  
  int   li_gxport  
  choose   case   gs_system_qt.ls_gxport  
  case   'COM1'  
  li_gxport   =   1  
  case   'COM2'  
  li_gxport   =   2  
  case   'COM3'  
  li_gxport   =   3  
  case   'COM4'  
  li_gxport   =   4  
  case   'COM5'  
  li_gxport   =   5  
  case   'COM6'  
  li_gxport   =   6  
  case   else    
  li_gxport   =   1  
  end   choose  
  gs_System_qt.ls_GxType：顾显型号  
  choose   case   gs_System_qt.ls_GxType  
  case   '双向数字顾显'  
  ls_display=char(12)+char(27)+'.'+char(9)+char(1)  
  OLE_gx.Object.CommPort=li_gxport  
  OLE_gx.Object.PortOpen=True  
  OLE_gx.Object.Output=ls_display  
  case   '双象中文顾显'  
  ls_display=String(real(2),"########0.00")  
  ls_display=char(27)   +   'QA'+   "欢迎"   +   Space(9   -   Len(ls_display))   +   ls_display   +char(13)  
  OLE_gx.Object.CommPort=li_gxport  
  OLE_gx.Object.PortOpen=True  
  OLE_gx.Object.Output=ls_display  
  OLE_gx.Object.PortOpen=False  
  case   'DIY   PD-LED8'  
  if   not   com_init(li_Gxport,2400)   then  
  messagebox("错误","顾显端口打开错误!",exclamation!)  
  end   if  
  case   'IBM   Sure   one   4614'  
  OLE_gx.Object.CommPort   =   4  
  OLE_gx.Object.PortOpen   =   True  
  case   '海信VC108'  
  ls_display   =   char(27)   +   char(64)    
  OLE_gx.Object.CommPort   =   li_gxport  
  OLE_gx.Object.PortOpen   =   True  
  OLE_gx.Object.Output   =   ls_display  
  // OLE_gx.Object.PortOpen=False  
  case   'LANPOS   IC-851'  
  if   not   com_init(li_Gxport,9600)   then  
  messagebox("错误","顾显端口打开错误!",exclamation!)  
  end   if  
  case   '桑达顾显'  
  if   not   OpenCom(li_Gxport)   then  
  messagebox("错误","顾显端口打开错误!",exclamation!)  
  end   if  
  end   choose  
  2、收银时候顾显显示数据  
  //顾显端口  
  choose   case   gs_system_qt.ls_gxport  
  case   'COM1'  
  li_gxport   =   1  
  case   'COM2'  
  li_gxport   =   2  
  case   'COM3'  
  li_gxport   =   3  
  case   'COM4'  
  li_gxport   =   4  
  case   'COM5'  
  li_gxport   =   5  
  case   'COM6'  
  li_gxport   =   6  
  case   else    
  li_gxport   =   1  
  end   choose    
   
   
  //顾显型号  
  Choose   Case   gs_System_qt.ls_GxType  
  Case   "DIY   PD-LED8"  
  if   ls_strnum   =   '.00'   then  
  ls_strnum   =   '0.00'  
  end   if  
  ls_display=Char(27)+Char(81)+Char(65)+   ls_strnum   +   Char(13);  
  choose   case   gs_zwgx    
  case   '应收'    
  ls_display   =   ls_display   +   Char(27)+Char(115)+"2"  
  case   '找零'  
  ls_display   =   ls_display   +   Char(27)+Char(115)+"4"  
  end   choose  
  com_send(ls_display,Len(ls_display))  
  case   '双象数字顾显'  
  ls_display=String(real(ls_strnum)*100,"########000")  
  ls_display=Space(11   -   Len(ls_display))   +   ls_display  
  OLE_gx.Object.Output   =   ls_display  
  case   '双象中文顾显'  
  ls_display=String(real(ls_strnum),"########0.00")  
  ls_display=char(27)   +   'QA'+   gs_zwgx   +   Space(9   -   Len(ls_display))   +   ls_display   +char(13)  
  OLE_gx.Object.Output=ls_display  
  case   'IBM   Sure   one   4614'  
  ls_display   =   char(31)  
  choose   case   gs_zwgx    
  case   'Total'  
  ls_display   =   ls_display   +   char(84)   +   char(111)   +   char(116)   +   char(97)   +   char(108)   +   char(58)  
  ls_display   =   ls_display   +   '           '   +   ls_strnum  
  case   'Change'  
  ls_display   =   ls_display   +   char(67)   +   char(104)   +   char(97)   +   char(110)   +   char(103)   +   char(101)   +   char(58)  
  ls_display   =   ls_display   +   '           '   +   ls_strnum  
  end   choose  
  case   '海信VC108'  
  //清屏  
  ls_display   =   char(12)    
  /*多谢惠顾：char(31)   +   char(80)   +   n      
  n=   0   暗  
  n=   1   亮  
  n=   2   闪烁  
  */  
  ls_display   =   ls_display   +   char(31)   +   char(80)   +   char(1)   //   显示’多谢惠顾‘    
  /*币种：char(31)   +   char(115)   +   n      
  n=   0   全暗  
  n=   1   人民币  
  n=   2   美元  
  n=   3   港元  
  n=   4   全亮  
  n=   5   转动  
  */  
  ls_display   =   ls_display   +   char(31)   +   char(115)   +   char(1)   //   显示’人民币‘    
  /*顾显状态：char(27)   +   char(115)   +   n      
  n=   0   全暗  
  n=   1   单价  
  n=   2   合计  
  n=   3   收款  
  n=   4   找零  
  */  
  choose   case   gs_zwgx    
  case   '合计'    
  ls_display   =   ls_display   +   char(27)   +   char(115)   +   char(2)   //合计  
  ls_display   =   ls_display   +   char(27)   +   char(81)   +   char(65)   +   ls_strnum   +   char(13)  
  case   '找零'  
  ls_display   =   ls_display   +   char(27)   +   char(115)   +   char(4)   //找零  
  ls_display   =   ls_display   +   char(27)   +   char(81)   +   char(65)   +   ls_strnum   +   char(13)  
  end   choose  
  case   'LANPOS   IC-851'  
  //指定汉字格式：  
  // [027][012]    
  // [027][115]，N，M  
  // 1<=N<=5  
  // 0<=M<=1  
  // N=1：小计  
  // N=2：合计  
  // N=3：单价  
  // N=4：收款  
  // N=5：找回  
  // M=0：灭  
  // M=1：亮  
  //  
   
  //必须先送中文再送数字×××××××××××××××××××××××××  
   
  //显示中文  
  choose   case   gs_zwgx    
  case   '合计'    
  //亮合计  
  ls_display   =   ls_display   +   char(27)   +   char(12)   +   Char(27)+Char(115)+char(2)   +   char(1)  
  //灭找回  
  ls_display   =   ls_display   +   char(27)   +   char(12)   +   Char(27)+Char(115)+char(5)   +   char(0)  
  case   '找回'  
  //亮找回  
  ls_display   =   ls_display   +   char(27)   +   char(12)   +   Char(27)+Char(115)+char(5)   +   char(1)  
  //灭合计  
  ls_display   =   ls_display   +   char(27)   +   char(12)   +   Char(27)+Char(115)+char(2)   +   char(0)  
  end   choose  
  if   ls_strnum   =   '.00'   then  
  ls_strnum   =   '0.00'  
  end   if  
  ls_display   =   ls_display   +   Char(27)+Char(81)+Char(65)+   ls_strnum   +   Char(13);  
  com_send(ls_display,Len(ls_display))  
  case   '桑达顾显'  
  SendByte(char(31),1)  
  SendByte(char(17),1)  
  choose   case   gs_zwgx    
  case   '合计'    
  ls_display   =   ls_display   +   '合计'   +char(10)  
  case   '找回'  
  ls_display   =   ls_display   +   '找回'   +char(10)  
  end   choose  
  if   ls_strnum   =   '.00'   then  
  ls_strnum   =   '0.00'  
  end   if  
  ls_display   =   ls_display   +   Char(27)+'QA'+   ls_strnum   +   Char(13);  
  SendByte(ls_display,Len(ls_display))  
  case   else  
  //  
  end   choose   
 

五、卡（包括IC卡和磁卡）  
  申明  
  //IC卡使用  
  Function   long   chk_baud(int   port)   library   "MWIC_32.dll"    
  Function   long   ic_init(int   port,long   baud)   library   "MWIC_32.dll"    
  Function   long   auto_init(int   port,long   baud)   library   "MWIC_32.dll"  
  Function   int   get_status(long   icdev,   ref   int   card_S)   library   "MWIC_32.dll"    
  Function   long   ic_exit(Long   icdev)   library   "MWIC_32.dll"    
  Function   int   set_baud(long   icdev,long   baud)   library   "MWIC_32.dll"    
  Function   int   cmp_dvsc(Long   icdev,   int   length,ref   string   data_buffer)   library   "MWIC_32.dll"    
  Function   int   srd_dvsc(Long   icdev,   int   length,ref   string   data_buffer)   library   "MWIC_32.dll"    
  Function   int   swr_dvsc(Long   icdev,   int   length,ref   string   data_buffer)   library   "MWIC_32.dll"    
  Function   int   setsc_md(Long   icdev,   int   mode)   library   "MWIC_32.dll"            
  Function   int   turn_on(Long   icdev)   library   "MWIC_32.dll"    
  Function   int   turn_off(Long   icdev)   library   "MWIC_32.dll"    
  Function   int   srd_ver(Long   icdev,int   le,ref   string   data_buffer)   library   "MWIC_32.dll"    
  Function   int   auto_pull(Long   icdev)   library   "MWIC_32.dll"    
  Function   int   dv_beep(Long   icdev,int   time)   library   "MWIC_32.dll"    
  Function   int   asc_hex(ref   string   asc,ref   string   hex,long   le)   library   "MWIC_32.dll"  
  Function   int   hex_asc(ref   string   hex,ref   string   asc,long   le)   library   "MWIC_32.dll"  
  Function   int   ic_encrypt(string   key,   ref   string   ptrsource   ,integer   le,ref   string   ptrdest)   library   "MWIC_32.dll"  
  Function   int   ic_decrypt(string   key,   ref   string   ptrdest,integer   le,ref   string   ptrsource)   library"MWIC_32.dll"  
   
   
  Function   int   srd_4442(long   icdev,int   Offset,int   length,ref   string   ata_buffer)   library   "MWIC_32.dll"    
  Function   int   swr_4442(long   icdev,int   Offset,int   length,ref   string   ata_buffer)   library   "MWIC_32.dll"    
  Function   int   prd_4442(long   icdev,int   length,ref   string   ata_buffer)   library   "MWIC_32.dll"    
  Function   int   pwr_4442(long   icdev,int   Offset,int   length,ref   string   ata_buffer)   library   "MWIC_32.dll"    
  Function   int   chk_4442(long   icdev)   library   "MWIC_32.dll"    
  Function   int   csc_4442(long   icdev,int   length,ref   string   ata_buffer)   library   "MWIC_32.dll"    
  Function   int   wsc_4442(long   icdev,int   length,ref   string   ata_buffer)   library   "MWIC_32.dll"    
  Function   int   rsc_4442(long   icdev,int   length,ref   string   ata_buffer)   library   "MWIC_32.dll"    
  Function   int   rsct_4442(long   icdev,ref   int   counter)   library   "MWIC_32.dll"  
  磁卡是只读卡号，所有的数据保存在数据库，根据上面的ole_input中的代码就可以读出卡号，然后根据卡号自己处理。  
  IC卡是金额和卡号都存储在机器里面，相对来说复杂一些  
  用卡支付  
  1、 初始化  
  choose   case   gs_system_qt.ls_icport  
  case   'COM1'  
  li_iccom   =   1  
  case   'COM2'  
  li_iccom   =   2  
  case   'COM3'  
  li_iccom   =   3  
  case   'COM4'  
  li_iccom   =   4  
  case   'COM5'  
  li_iccom   =   5  
  case   'COM6'  
  li_iccom   =   6  
  case   'LPT1'  
  li_iccom   =   7  
  case   'LPT2'  
  li_iccom   =   8  
  case   else  
  gf_messagebox(2,'IC卡设备的端口设置错误，请到系统设置中设置！')  
  close(this)  
  return    
  end   choose  
  choose   case   gs_system_qt.ls_ictype  
  case   'MW   RD-EB'   //明华  
  icdev=   auto_init(li_iccom   -   1   ,9600)       //初始化端口1,波特率是9600  
  if   icdev<0   then  
  messagebox("提示信息","串口初始化错误！请检查IC卡设备是否接上正确的串口或电源是否已经打开！")  
  closewithreturn(this,"close")  
  end   if  
  case   'DIY键盘IC卡'  
  icdev   =   diy95_ic.ic_init(li_iccom   -   1   ,9600)               //初始化端口1,波特率是9600  
  if   icdev<0   then  
  messagebox("提示信息","串口初始化错误！请检查IC卡设备是否接上正确的串口或电源是否已经打开！")  
  closewithreturn(this,"close")  
  end   if  
  end   choose  
  Top

2、 支付  
   
  //划卡后进行相应地处理  
  //再次判断网络状态，  
  choose   case   gs_system_qt.ls_ictype  
  case   'MW   RD-EB'   //明华  
  //从IC卡中读取数据  
  if   chk_4442(icdev)   <   0   then  
  st_2.text="未检测到IC卡，请插入IC卡后按『确定』进行支付操作..."  
  gf_icbeep(icdev,-1)  
  return  
  end   if  
  //验证密码  
  password=gf_geticpwd(gs_system_qt.ls_userid)  
  asc_hex(password,password1,3)  
  if   csc_4442(icdev,   3,ref   password1)   <   0   then  
  rsct_4442(icdev,ref   counter)                         //读出密码错误计数器  
  st_2.text="密码校验失败！该卡密码错误计数还剩"+String(counter)+"次！"  
  gf_icbeep(icdev,-1)  
  return  
  end   if  
  rsct_4442(icdev,ref   counter)                         //读出密码错误计数器  
  if   counter<1   then  
  st_2.text="此卡由于三次密码错误,已经锁定！"  
  gf_icbeep(icdev,-1)  
  return  
  End   If  
  //从IC卡中读取信息  
  offset=32  
  length=174  
  ls_readdata=space(174)  
  if   srd_4442(icdev,   Offset,   length,ref   ls_readdata)   =   0   then  
  ls_readdata   =   space(31)   +   ls_readdata  
  //判断是不是新卡  
  if   mid(ls_readdata,32,1)<>"s"   then  
  gf_icbeep(icdev,-1)  
  gf_messagebox(1,"此卡尚未发行，请重新插入卡片...")  
  return  
  end   if    
  ls_cardcode   =   trim(mid(ls_readdata,33,50))  
  //读出卡中的余额  
  ldec_money_card   =   dec(mid(ls_readdata,83,20))  
  //卡的可用金额   ＝   卡余额   －   储值卡消费下限  
  ldec_money_card   =   ldec_money_card   -   gs_system_qt.ldec_cardminmoney  
  //读取卡本次发行操作次数  
  ll_operatorid=long(mid(ls_readdata,201,5))   +   1  
  ls_operatorid   =   string(ll_operatorid)  
  //计算写到卡里的余额  
  ldec_money_card_now   =   ldec_money_card   -   ldec_money_now   +   gs_system_qt.ldec_cardminmoney  
  //给要写入的数据赋值:金额，卡片ID，本次发行操作次数  
  //第83-第102：         金额（20位），      
  ls_alldata   =   string(ldec_money_card_now)   +   space(20   -   len(string(ldec_money_card_now)))  
  //第103-第112：       卡片ID（10位），      
  ls_alldata   =   ls_alldata   +   mid(ls_readdata,103,10)  
  //第113：                   卡片状态（1位）  
  ls_alldata   =   ls_alldata   +   mid(ls_readdata,113,1)  
  //第114-第200：       服装软件使用（87位），      
  ls_alldata   =   ls_alldata   +   mid(ls_readdata,114,87)  
  //第201-第205：       本次发行使用次数（5位），      
  ls_alldata   =   ls_alldata   +   space(5   -   len(ls_operatorid))   +   ls_operatorid  
  //写入卡片  
  li_Offset   =   83  
  li_length   =   205   -   82  
  if   swr_4442(icdev,   li_Offset,   li_length,ref   ls_allData)   <>   0   then  
  gf_icbeep(icdev,-1)  
  gf_messagebox(1,"写入卡片时发生错误！")  
  return  
  End   If  
  //校验  
  ls_checkdata=space(205   -   82)  
  if   srd_4442(icdev,   83,   205   -   82,ref   ls_checkdata)   =   0   then  
  if   ls_checkdata   <>   ls_alldata   then  
  gf_icbeep(icdev,-1)  
  messagebox("info","校验错误！")  
  return  
  end   if  
  else  
  gf_icbeep(icdev,-1)  
  messagebox("info","读取校验错误！")  
  return  
  End   If  
  gf_icbeep(icdev,1)  
  case   'DIY键盘IC卡'  
  if     diy95_ic.is_card_on(icdev)   <>   0   then  
  st_2.text="未检测到IC卡，请插入IC卡后按『确定』进行查询操作..."  
  gf_icbeep(icdev,-1)  
  return  
  end   if  
  //卡上电  
  if   diy95_ic.turnon_sle44xx(icdev,ls_datalen,ls_databuff)   <>   0   then  
  st_2.text="IC卡上电失败..."  
  gf_icbeep(icdev,-1)  
  return  
  end   if    
  //验证密码  
  password=gf_geticpwd(gs_system_qt.ls_userid)  
  asc_hex(password,password1,3)   //该函数使用的时明华IC卡的函数  
  if   diy95_ic.csc_sle44x2(icdev,3,password1)   <>   0   then     //密码校验失败  
  if   diy95_ic.rsct_sle44x2(icdev,counter)   =   0   then                         //读出密码错误计数器  
  gf_icbeep(icdev,-1)  
  st_2.text   =   "密码校验错误！此卡密码错误计数为："+String(counter)+"，请小心使用！"  
  return  
  end   if  
  end   if  
  //判断该卡是否已经被锁定  
  if   diy95_ic.rsct_sle44x2(icdev,counter)   =   0   then                         //读出密码错误计数器  
  if   counter   <   1   then    
  st_2.text="此卡由于三次密码错误,已经锁定！"  
  gf_icbeep(icdev,-1)  
  return  
  end   if  
  end   if  
  //从IC卡中读取信息  
  offset=32  
  length=120  
  ls_readdata=space(120)  
  if   diy95_ic.srd_sle44x2(icdev,0,offset,length,ls_datalen,ls_readdata)   =   0   then   ls_readdata   =   space(31)   +   ls_readdata  
  //判断是不是新卡  
  if   mid(ls_readdata,32,1)<>"s"   then  
  gf_icbeep(icdev,-1)  
  gf_messagebox(1,"此卡尚未发行，请重新插入卡片...")  
  return  
  end   if  
  //卡号  
  ls_cardcode   =   trim(mid(ls_readdata,33,50))  
  //读出卡中的余额  
  ldec_money_card   =   dec(mid(ls_readdata,83,20))  
  ls_operatorid   =   space(5)  
  if   diy95_ic.srd_sle44x2(icdev,0,201,5,ls_datalen,ls_operatorid)   =   0   then    
  ll_operatorid=long(ls_operatorid)   +   1  
  ls_operatorid   =   string(ll_operatorid)  
  else  
      gf_icbeep(icdev,-1)  
      gf_messagebox(1,"读取卡片错误！")  
      return  
  end   if  
  //给要写入的数据赋值:金额，卡片ID，卡片状态，服装部分，本次发行操作次数  
  //第83-第102：         金额（20位），     ls_alldata=string(ldec_money_card_now)+space(20-len(string(ldec_money_card_now)))  
  //第103-第112：       卡片ID（10位），      
  ls_alldata   =   ls_alldata   +   mid(ls_readdata,103,10)  
  //第113：                   卡片状态（1位）  
  ls_alldata   =   ls_alldata   +   mid(ls_readdata,113,1)  
  //第114-第200：       服装软件使用（87位），      
  ls_alldata   =   ls_alldata   +   space(87)//   +   mid(ls_readdata,114,87)  
  //第201-第205：       本次发行使用次数（5位），      
  ls_alldata   =   ls_alldata   +   space(5   -   len(ls_operatorid))   +   ls_operatorid  
  //写入卡片  
  li_Offset   =   83  
  li_length   =   205   -   82  
  if   diy95_ic.swr_sle44x2(icdev,0,li_Offset,li_length,ref   ls_allData)   <>   0   then gf_icbeep(icdev,-1)  
  gf_messagebox(1,"写入卡片时发生错误！")  
  return  
  End   If  
  //校验  
  ls_checkdata=space(205   -   82)  
  if   diy95_ic.srd_sle44x2(icdev,0,83,   205   -   82,ls_datalen,ref   ls_checkdata)   =   0   then   if   ls_checkdata   <>   ls_alldata   then  
  gf_icbeep(icdev,-1)  
  messagebox("info","校验错误！")  
  return  
  end   if  
  else  
  gf_icbeep(icdev,-1)  
  messagebox("info","读取校验错误！")  
  return  
  End   If  
  //下电  
  if   diy95_ic.turnoff_sle44xx(icdev)   <>   0   then    
  gf_icbeep(icdev,-1)  
  messagebox("info","下电失败！")  
  return  
  end   if  
  gf_icbeep(icdev,1)  
   
   
  函数gf_icbeep  
  参数 类型  
  Icdev long  
  i_type Integer  
  choose   case   i_type  
  case   1  
  choose   case   gs_system_qt.ls_ictype  
  case   'MW   RD-EB'   //明华  
  dv_beep(icdev,10)  
  dv_beep(icdev,10)  
  case   'DIY键盘IC卡'  
  diy95_ic.dv_beep(icdev,1)   //两声  
  end   choose  
  case   -1  
  choose   case   gs_system_qt.ls_ictype  
  case   'MW   RD-EB'   //明华  
  dv_beep(icdev,50)  
  case   'DIY键盘IC卡'//一共响4声  
  diy95_ic.dv_beep(icdev,0)   //1声  
  diy95_ic.dv_beep(icdev,0)   //1声  
  diy95_ic.dv_beep(icdev,0)   //1声  
  diy95_ic.dv_beep(icdev,0)   //1声  
  end   choose  
  case   else  
  choose   case   gs_system_qt.ls_ictype  
  case   'MW   RD-EB'   //明华  
  dv_beep(icdev,50)  
  dv_beep(icdev,50)  
  case   'DIY键盘IC卡'  
  diy95_ic.dv_beep(icdev,0)   //1声  
  diy95_ic.dv_beep(icdev,0)   //1声  
  diy95_ic.dv_beep(icdev,0)   //1声  
  diy95_ic.dv_beep(icdev,0)   //1声  
  diy95_ic.dv_beep(icdev,0)   //1声  
  diy95_ic.dv_beep(icdev,0)   //1声  
  diy95_ic.dv_beep(icdev,0)   //1声  
  diy95_ic.dv_beep(icdev,0)   //1声  
  end   choose  
  end   choose  
  Top