opensips.cfg 研究分析
#
# $Id$
#
# OpenSIPS residential configuration script
# by OpenSIPS Solutions <team@opensips-solutions.com>
#
# This script was generated via "make menuconfig", from
# the "Residential" scenario.
# You can enable / disable more features / functionalities by
# re-generating the scenario with different options.#
#
# Please refer to the Core CookBook at:
# http://www.opensips.org/Resources/DocsCookbooks
# for a explanation of possible statements, functions and parameters.
#
####### Global Parameters #########
debug=2
log_stderror=no
log_facility=LOG_LOCAL1
fork=yes//设置了yes进程在后台运行,在前台运行可以找到脚本中的错误
children=4//每个网卡创建的子进程数,不过对于tcp进程没有影响
/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes
/* uncomment the next line to enable the auto temporary blacklisting of
not available destinations (default disabled) */
#disable_dns_blacklist=no
/* uncomment the next line to enable IPv6 lookup after IPv4 dns
lookup failures (default disabled) */
#dns_try_ipv6=yes
/* comment the next line to enable the auto discovery of local aliases
based on revers DNS on IPs */
auto_aliases=no
listen=udp:192.168.1.216:5060 # CUSTOMIZE ME
listen=tcp:192.168.1.216:5060 # CUSTOMIZE ME
####### Modules Section ########
#set module path
mpath="/usr/local/opensips_proxy//lib64/opensips/modules/"
//模块搜索路径
#### SIGNALING module
loadmodule "signaling.so"
#### StateLess module
loadmodule "sl.so"
#### Transaction Module
loadmodule "tm.so"
modparam("tm", "fr_timeout", 5)
modparam("tm", "fr_inv_timeout", 30)
modparam("tm", "restart_fr_on_each_reply", 0)
modparam("tm", "onreply_avp_mode", 1)
#### Record Route Module
loadmodule "rr.so"
/* do not append from tag to the RR (no need for this script) */
modparam("rr", "append_fromtag", 0)
#### MAX ForWarD module
loadmodule "maxfwd.so"
#### SIP MSG OPerationS module
loadmodule "sipmsgops.so"
#### FIFO Management Interface
loadmodule "mi_fifo.so"
modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
modparam("mi_fifo", "fifo_mode", 0666)
#### URI module
loadmodule "uri.so"
modparam("uri", "use_uri_table", 0)
#### MYSQL module
loadmodule "db_mysql.so"
#### USeR LOCation module
loadmodule "usrloc.so"
modparam("usrloc", "nat_bflag", "NAT")
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
#### REGISTRAR module
loadmodule "registrar.so"
modparam("registrar", "tcp_persistent_flag", "TCP_PERSISTENT")
modparam("registrar", "received_avp", "$avp(received_nh)")
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
#### ACCounting module
loadmodule "acc.so"
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_cancels", 0)
/* by default we do not adjust the direct of the sequential requests.
if you enable this parameter, be sure the enable "append_fromtag"
in "rr" module */
modparam("acc", "detect_direction", 0)
modparam("acc", "failed_transaction_flag", "ACC_FAILED")
/* account triggers (flags) */
modparam("acc", "db_flag", "ACC_DO")
modparam("acc", "db_missed_flag", "ACC_MISSED")
modparam("acc", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
#### AUTHentication modules
loadmodule "auth.so"
loadmodule "auth_db.so"
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db|uri", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
modparam("auth_db", "load_credentials", "")
#### DIALOG module
loadmodule "dialog.so"
modparam("dialog", "dlg_match_mode", 1)
modparam("dialog", "default_timeout", 21600) # 6 hours timeout
modparam("dialog", "db_mode", 2)
modparam("dialog", "db_url",
"mysql://opensips:opensipsrw@localhost/opensips") # CUSTOMIZE ME
#### NAT modules
loadmodule "nathelper.so"
modparam("nathelper", "natping_interval", 10)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", "SIP_PING_FLAG")
modparam("nathelper", "sipping_from", "sip:pinger@127.0.0.1") #CUSTOMIZE ME
modparam("nathelper", "received_avp", "$avp(received_nh)")
loadmodule "rtpproxy.so"
modparam("rtpproxy", "rtpproxy_sock", "udp:192.168.1.216:12221") # CUSTOMIZE ME
loadmodule "proto_udp.so"
loadmodule "proto_tcp.so"
####### Routing Logic ########
# main request routing logic
route{
force_rport();
if (nat_uac_test("23")) {
if (is_method("REGISTER")) {
fix_nated_register();
setbflag(NAT);
} else {
fix_nated_contact();
setflag(NAT);
}
}
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
# validate the sequential request against dialog
if ( $DLG_status!=NULL && !validate_dialog() ) {
xlog("In-Dialog $rm from $si (callid=$ci) is not valid according to dialog\n");
## exit;
}
if (is_method("BYE")) {
setflag(ACC_DO); # do accounting ...
setflag(ACC_FAILED); # ... even if the transaction fails
} else if (is_method("INVITE")) {
# even if in most of the cases is useless, do RR for
# re-INVITEs alos, as some buggy clients do change route set
# during the dialog.
record_route();
}
if (check_route_param("nat=yes"))
setflag(NAT);
# route it out to whatever destination was set by loose_route()
# in $du (destination URI).
route(relay);
} else {
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after
# a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ->
# ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
if ( !(is_method("REGISTER") ) ) {
if (from_uri==myself)
{
# authenticate if from local subscriber
# authenticate all initial non-REGISTER request that pretend to be
# generated by local subscriber (domain from FROM URI is local)
if (!proxy_authorize("", "subscriber")) {
proxy_challenge("", "0");
exit;
}
if (!db_check_from()) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
consume_credentials();
# caller authenticated
} else {
# if caller is not local, then called number must be local
if (!uri==myself) {
send_reply("403","Rely forbidden");
exit;
}
}
}
# preloaded route checking
if (loose_route()) {
xlog("L_ERR",
"Attempt to route with preloaded Route's [$fu/$tu/$ru/$ci]");
if (!is_method("ACK"))
sl_send_reply("403","Preload Route denied");
exit;
}
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
# account only INVITEs
if (is_method("INVITE")) {
# create dialog with timeout
if ( !create_dialog("B") ) {
send_reply("500","Internal Server Error");
exit;
}
setflag(ACC_DO); # do accounting
}
if (!uri==myself) {
append_hf("P-hint: outbound\r\n");
route(relay);
}
# requests for my domain
if (is_method("PUBLISH|SUBSCRIBE"))
{
sl_send_reply("503", "Service Unavailable");
exit;
}
if (is_method("REGISTER"))
{
# authenticate the REGISTER requests
if (!www_authorize("", "subscriber"))
{
www_challenge("", "0");
exit;
}
if (!db_check_to())
{
sl_send_reply("403","Forbidden auth ID");
exit;
}
if ( proto==TCP || 0 ) setflag(TCP_PERSISTENT);
if (isflagset(NAT)) {
setbflag(SIP_PING_FLAG);
}
if (!save("location"))
sl_reply_error();
exit;
}
if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# do lookup with method filtering
if (!lookup("location","m")) {
if (!db_does_uri_exist()) {
send_reply("420","Bad Extension");
exit;
}
t_newtran();
t_reply("404", "Not Found");
exit;
}
if (isbflagset(NAT)) setflag(NAT);
# when routing via usrloc, log the missed calls also
setflag(ACC_MISSED);
route(relay);
}
route[relay] {
# for INVITEs enable some additional helper routes
if (is_method("INVITE")) {
if (isflagset(NAT)) {
rtpproxy_offer("ro");
}
t_on_branch("per_branch_ops");
t_on_reply("handle_nat");
t_on_failure("missed_call");
}
if (isflagset(NAT)) {
add_rr_param(";nat=yes");
}
if (!t_relay()) {
send_reply("500","Internal Error");
};
exit;
}
branch_route[per_branch_ops] {
xlog("new branch at $ru\n");
}
onreply_route[handle_nat] {
if (nat_uac_test("1"))
fix_nated_contact();
if ( isflagset(NAT) )
rtpproxy_answer("ro");
xlog("incoming reply\n");
}
failure_route[missed_call] {
if (t_was_cancelled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}
}
local_route {
if (is_method("BYE") && $DLG_dir=="UPSTREAM") {
acc_db_request("200 Dialog Timeout", "acc");
}
}
#####2008.04.13
opensips.cfg 配置文件
debug=3 #debug level (cmd line: -ddddddddd)
设置日志级别,数值-3到4,默认2 数越大,就会有更多的信息被写到日志。设置为4
系统的性能会下降的(sluggish)
fork=yes
设置了yes进程会在在后台运行,有时候在前台运行也很重要,可以来找到脚本中的错误
如果fork disabled openser只能监听一个网卡,tpc/tls也会自动disabled。 在单进程模式,只有udp
接口允许。
log_stderror=no (cmd line :-E)
set yes 服务器会打印调试信息到标准错误输出
set no syslog 会被使用。
children=4
每个网卡创建的子进程数,不过对于tcp进程没有影响。
port=5060
监听端口,一般不用改(tcp还是udp呢?)
mpath=”/usr/local/opensips/lib/opensips/modules/”
模块搜索路径
modparam(“mi_fifo”,”fifo_name”,”/tmp/openser_fifo”)
命名管道被创建用来监听和读外来命令。
modparam(“usrloc”,”db_mode”,0)
usrloc 模块负责用户定位服务,当用户注册的时候它保存定位信息,在这儿的0代表内存,关掉服务器
信息会丢失。
modparam(“rr”,”enable_full_lr”,1)
设置rr模块的enable_full_lr为1~~~~~
route{
sip 请求路由逻辑的开始
record_route() 函数添加路由记录头
loose_route() 函数测试请求是否用record-route 头
if(loose_route()){
#mark routing logic in request
append_hf(“P-hint:rr-enforced\r\n”);
route(1);
};
function append_hf will add a header field with a hint(暗示) that the request was
processed according to the record-route 头(rr-enforced)。
if(!uri==myself)
如果请求域名不是本机情况的处理。
lookup(“aliases”);
简单的查找canonical(经典的符合规范的) URI在request中的
lookup(“location”) 试着恢复R-URI的(AOR),如果用户已经注册即AOR可以被定位,它会改变R-URI的用户UA ip地址
if the AOR is not found we will simply send back an error message(“404 not found”).
t_relay() function forwards the request statefully based on the request URI.
The domain part is resolved using DNS helpers such as NAPTR,SRV,and A records. This function is
exposed by the TRANSACTION module(tm.so).如果请求不能成功的发送的目的地,r_relay()函数会自动
产生一个错误message。sl_reply_error()会把failure发送到UA。
Transactions and dialogs
一个Transaction通常像对话协商。(一个会话的建立过程就是一个transaction,结束的时候也是)而整个这个过程是一个对话。
dialog is identified by the combination of the from ,to and call-id heard fields.
不是所有的方法都产生一个对话,象register和message就不会。
Inital and Sequential Requests
区分它们很重要:initial request 用via header记录路由信息,如果打开了record-routing enabled,route header也会用到。
在transaction中 数据包会根据via头回到传输它的proxy。
subsequent requests 通过contact header 来路由的,即使设置了record-routing,它会通过set diescovered route 回来。