在FreeBSD平台下使用mrtg来监控cpu、内存、交换分区、TCP连接以及本机网卡流量

介绍在FreeBSD平台下如何安装和使用mrtg来监控cpu、内存、交换分区、TCP连接以及本机网卡流量

1.安装
#安装apache2
cd /usr/ports/www/apache2
make install clean

#安装p5-SNMP
cd  /usr/ports/net-mgmt/p5-SNMP
make install clean

#安装mrtg
cd /usr/ports/net-mgmt/mrtg
make install clean

2.编写配置文件
LoadMIBs: /usr/local/share/snmp/mibs/UCD-SNMP-MIB.txt
WorkDir: /usr/local/www/data/mrtg
Language: chinese

#monitoring User vs Idle CPU usage
Target[kontor.cpu]:ssCpuRawUser.0&ssCpuRawIdle.0:public@192.168.0.150
RouterUptime[kontor.cpu]: public@192.168.0.150
MaxBytes[kontor.cpu]: 100
Title[kontor.cpu]: CPU LOAD
PageTop[kontor.cpu]: <H1>User CPU Load %</H1>
Unscaled[kontor.cpu]: ymwd
ShortLegend[kontor.cpu]: %
YLegend[kontor.cpu]: CPU Utilization
Legend1[kontor.cpu]: User CPU in % (Load)
Legend2[kontor.cpu]: Idle CPU in % (Load)
LegendI[kontor.cpu]:  User
LegendO[kontor.cpu]:  Idle
Options[kontor.cpu]: growright,nopercent

#monitoring User vs System CPU usage
Target[kontor.usrsys]:ssCpuRawUser.0&ssCpuRawSystem.0:public@192.168.0.150
RouterUptime[kontor.usrsys]: public@192.168.0.150
MaxBytes[kontor.usrsys]: 100
Title[kontor.usrsys]: CPU LOAD
PageTop[kontor.usrsys]: <H1>CPU (user and system) Load %</H1>
Unscaled[kontor.usrsys]: ymwd
ShortLegend[kontor.usrsys]: %
YLegend[kontor.usrsys]: CPU Utilization
Legend1[kontor.usrsys]: User CPU in % (Load)
Legend2[kontor.usrsys]: System CPU in % (Load)
LegendI[kontor.usrsys]:  User
LegendO[kontor.usrsys]:  System
Options[kontor.usrsys]: growright,nopercent

#monitoring Active CPU usage
Target[kontor.cpusum]:ssCpuRawUser.0&ssCpuRawUser.0:public@192.168.0.150 + ssCpuRawSystem.0&ssCpuRawSystem.0:public@192.168.0.150 + ssCpuRawNice.0&ssCpuRawNice.0:public@192.168.0.150
RouterUptime[kontor.cpusum]: public@192.168.0.150
MaxBytes[kontor.cpusum]: 100
Title[kontor.cpusum]: CPU LOAD
PageTop[kontor.cpusum]: <H1>Active CPU Load %</H1>
Unscaled[kontor.cpusum]: ymwd
ShortLegend[kontor.cpusum]: %
YLegend[kontor.cpusum]: CPU Utilization
Legend1[kontor.cpusum]: Active CPU in % (Load)
LegendI[kontor.cpusum]:  Active
Options[kontor.cpusum]: growright,nopercent

#Monitoring TCP connections
Target[tcpopen]: .1.3.6.1.2.1.6.9.0&.1.3.6.1.2.1.6.9.0:public@192.168.0.150
Options[tcpopen]: nopercent,growright,gauge,noinfo
Title[tcpopen]: Open TCP connections
PageTop[tcpopen]: <h1>Open TCP connections</H1>
MaxBytes[tcpopen]: 1000000
YLegend[tcpopen]: # conns
ShortLegend[tcpopen]: connections
LegendI[tcpopen]:  Connections:
Legend1[tcpopen]: Open TCP connections

#Monitoring Free Memory
Target[freemem]: .1.3.6.1.4.1.2021.4.11.0&.1.3.6.1.4.1.2021.4.11.0:public@192.168.0.150
Options[freemem]: nopercent,growright,gauge,noinfo
Title[freemem]: Free Memory
PageTop[freemem]: <h1>Free Memory</h1>
MaxBytes[freemem]: 1000000
kMG[freemem]: k,M,G,T,P,X
YLegend[freemem]: bytes
ShortLegend[freemem]: bytes
LegendI[freemem]:  Free Memory:
Legend1[freemem]: Free memory, not including swap, in bytes

#monitoring localhost ethernet traffic
Target[192.168.0.150_1]: 1:public@192.168.0.150:
SetEnv[192.168.0.150_1]: MRTG_INT_IP="192.168.0.150" MRTG_INT_DESCR="lnc0"
MaxBytes[192.168.0.150_1]: 100000000
Title[192.168.0.150_1]: Traffic Analysis for 1
PageTop[192.168.0.150_1]: <H1>Traffic Analysis for 1</H1>
Options[192.168.0.150_1]: growright,bits

将上面的代码保存为/usr/local/www/data/mrtg/mrtg.cfg

3.然后执行下面的命令，一共要执行三才，前两次会报错不用管，知道第三次没错就OK了，如果第三次还提示错误情检查配置文件

/usr/local/bin/mrtg /usr/local/www/data/mrtg/mrtg.cfg

4.制作索引页面

/usr/local/bin/indexmaker --output=/usr/local/www/data/mrtg/index.html /usr/local/www/data/mrtg/mrtg.cfg

5.crontab -e 编辑计划任务，添加下面一条任务

*/5  *  *  *  *  /usr/local/bin/mrtg /usr/local/www/data/mrtg/mrtg.cfg

好了，现在就就可以通过浏览器访问 http://192.168.0.150/mrtg 来监控你的计算机了