configure: error: libpq is not installed or libpq is old

最新推荐文章于 2024-06-12 10:28:29 发布
原创 最新推荐文章于 2024-06-12 10:28:29 发布 · 429 阅读 · 0 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
文章标签：

#数据库开发

sudo apt-get install libpq-dev

sudo apt-get install postgresql-server-dev-all

php7.4：configure: error: Package requirements (libzip >= 0.11) were not met: No package 'libzip'
arthurli的博客
04-20 9984
当前环境 CentOS Linux release 7.6.1810 (Core) php 7.4.3 问题 前段时间在个人的服务器上想升级一下php版本，然后就下载编译安装了7.4.3版本。编译时遇到几个No package 'xxx' found，比如No package 'sqlite3' found，只需要网上搜一下安装对应的库就行了，比如对应sqlite3的，执行yum install ...
【postgre】编译源码并静态链接libpq.a(C库)的步骤与解决未定义引用的问题
qq_43612746的博客
06-20 1262
一开始我以为libpq和普通其他库一样，要么可能有官网，要么可能在github上直接能找到，于是上github上找了libpq后发现了个jtv/libpqxx，后来查了查，这个原来是C++的库，虽然人家链接的时候也是-lpq，但是和C库的没啥关系。一开始怀疑是不是makefile没有链接上-lpq,确认不是这方面问题后，查看是不是自己编译的库有问题，于是看了看自己编译的libpq的符号表上是否有这些符号，有说明还是我链接有问题，没有说明除了这个库，我还缺少其他东西。2.出现找不到头文件怎么办？
libpq is not installed or libpq is old
TS_forever007的博客
05-16 626
configure脚本在/usr/local/pgsql库下搜索libpq库。如果您已将PostgreSQL安装到/usr/local/pgsql以外的目录，请在执行configure时使用–with-pgsql命令行选项。如果编译的时候已经指定了pgsql目录，依然报错，可能是没有安装postgresql-devel（本次安装就是这个原因）可能是configure脚本无法识别本机libpq库。在pgpool的安装编译过程中报如下错误。
pgpool-II安装时报错configure: error: libpq is not installed or libpq is old
ss954773878的博客
09-03 3470
有需求来安装pgpool-II实现高可用，正常下载解压，报错 看了网上很多的教程，说是加上-with-pgsql，但不尽然都是，仍报错 configure: error: libpq is not installed or libpq is old 这是为什么呢，其实是没有安装postgresql-devel组件，so我们就 yum install -y postgresql* gcc* 解决所...
pgpool mysql_关于Pgpool安装时：libpq is not installed or libpq is old解决方案
weixin_33474071的博客
02-28 291
环境：系统：Centos7pgpool:pgpool-II-3.3.1.tar.gzpgsql:postgresql-9.5.2-1-linux-x64.run首先纠正下我自己的一个错误：每次安装完pgsql都不配置环境变量！这也是该问题的关键。装了N次pgpool都以libpq is not installed or libpq is old告终。之前用过ldd来查找libpq动态库，然后软连接...
configure: error: libpq is not installed or libpq
lswfly的专栏
07-26 1877
通过postgresql搭建集群环境时用到了pgpools，结果安装过程中报错： configure: error: libpq is not installed or libpq is old   经过查找官方文档，文档说明如下： Note: pgpool-II requires libpq library in PostgreSQL 7.4 or later (version 3 p...
关于Pgpool安装时：libpq is not installed or libpq is old解决方案
weixin_36242590的博客
06-14 3663
关于Pgpool安装时：libpq is not installed or libpq is old解决方案环境： 系统：Centos7 pgpool:pgpool-II-3.3.1.tar.gz pgsql:postgresql-9.5.2-1-linux-x64.run 首先纠正下我自己的一个错误：每次安装完pgsql都不配置环境变量！这也是该问题的关键。
PostgreSQL: libpq - C 库
安子自语
09-22 1063
http://www.php100.com/manual/PostgreSQL8/libpq.html char conninfo[2000] = ""; //DB connection config strcpy(conninfo, "dbname="); strcat(conninfo, DB_NAME); strcat(conninfo, " "); strcat(conn
SQL 错误 [0A000]: ERROR: extension "zhparser" is not available Detail: Could not open extension control file "/usr/pgsql-15/share/extension/zhparser.control": No such file or directory. Hint: The extension must first be installed on the system where PostgreSQL is running.
06-14
sudo apt install -y make gcc postgresql-server-dev-15 libpq-dev git ``` #### 二、安装 SCWS 分词器 ```bash # 下载编译 SCWS wget http://www.xunsearch.com/scws/down/scws-1.2.3.tar.bz2 tar xvjf scws-...
PostgreSQL16.3基于CentOS7.9源码安装步骤
分享关于Java编程、数据库管理和信息安全方面的最佳实践
06-12 1087
创建一个 cron job 来定时运行这个脚本。#设置每天凌晨2点执行备份脚本。#为脚本添加可执行权限。
libpq for centos(postgresql 8.4)
10-16
此版本是postgresql 8.4目录下下载的头文件和so wmslib.tar.gz需要解到linux目录 不能解到/mnt的windows目录下 否则符号链接libpq.so会不存在将这些库放到系统路径下即可实现连接 例如64位系统，/usr/lib64/ 已经在centos6.5上成功使用 makefile连接libpq.so即可
[yuhuanxi@localhost postgis-3.2.1]$ make clean ./configure checking for a BSD-compatible install... /usr/bin/install -c checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking how to print strings... printf checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for fgrep... /usr/bin/grep -F checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B checking the name lister (/usr/bin/nm -B) interface... BSD nm checking whether ln -s works... yes checking the maximum length of command line arguments... 1572864 checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop checking for /usr/bin/ld option to reload object files... -r checking for objdump... objdump checking how to recognize dependent libraries... pass_all checking for dlltool... no checking how to associate runtime and link libraries... printf %s\n checking for ar... ar checking for archiver @FILE support... @ checking for strip... strip checking for ranlib... ranlib checking for gawk... gawk checking command to parse /usr/bin/nm -B output from gcc object... ok checking for sysroot... no checking for a working dd... /usr/bin/dd checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 checking for mt... no checking if : is a manifest tool... no checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for dlfcn.h... yes checking for objdir... .libs checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC -DPIC checking if gcc PIC flag -fPIC -DPIC works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking if gcc supports -c -o file.o... (cached) yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for gcc... (cached) gcc checking whether we are using the GNU C compiler... (cached) yes checking whether gcc accepts -g... (cached) yes checking for gcc option to accept ISO C89... (cached) none needed checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... (cached) /usr/bin/grep checking whether byte ordering is bigendian... no checking for cpp... /usr/bin/cpp checking if gcc supports -fno-math-errno... yes checking if gcc supports -fno-signed-zeros... yes checking if gcc supports -std=gnu99... yes checking if gcc supports --exclude-libs... yes checking for flex... no checking for lex... no checking for bison... no checking ieeefp.h usability... no checking ieeefp.h presence... no checking for ieeefp.h... no checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking for vasprintf... yes checking for asprintf... yes checking for _LARGEFILE_SOURCE value needed for large files... no checking for perl... /usr/bin/perl checking for xsltproc... /usr/bin/xsltproc checking for convert... no configure: WARNING: ImageMagick does not seem to be installed. Documentation cannot be built checking for dblatex... no configure: WARNING: dblatex is not installed so PDF documentation cannot be built checking for xmllint... /usr/bin/xmllint configure: WARNING: could not locate Docbook stylesheets required to build the documentation checking for pkg-config... /usr/bin/pkg-config checking pkg-config is at least version 0.9.0... yes checking for CUNIT... no configure: WARNING: could not locate CUnit required for unit tests checking iconv.h usability... yes checking iconv.h presence... yes checking for iconv.h... yes checking for libiconv_open in -liconv... no checking for iconv_open in -lc... yes checking for iconvctl... no checking for libiconvctl... no checking for pg_config... /usr/bin/pg_config checking PostgreSQL version... PostgreSQL 9.2.24 configure: error: PostGIS requires PostgreSQL >= 9.6 make: *** [GNUmakefile] 错误 1 给出以上报错的解决方式
最新发布
10-10
首先，用户的问题是：执行 `make clean` 和 `./configure` 后出现 "PostGIS requires PostgreSQL >= 9.6" 报错的解决方式。用户想知道如何解决这个错误。 从引用中可以看出： - 引用[1] 提到了PostgreSQL版本的选择...
Python3.7安装psycopg2时报error "Psycopg requires PostgreSQL client library (libpq) >= 9.1"等以下错误的解决办法
boyheroes的博客
06-18 5628
Python3.7安装时pip install psycopg2经常出现以下报错: 现象： a. error "Psycopg requires PostgreSQL client library (libpq) >= 9.1" b. Error:pg_config executable not foun...
解决configure: error: Popt libraries is required简单报错笔记！
weixin_34194359的博客
09-12 492
问题：编译keepalived时报 configure: error: Popt libraries is required问题原因：这个错误是因为没有安装popt的开发包导致的解决方式：只要yum install popt-devel,就可以安装好popt的开发包了。重新./configure总结：一般编译报错是缺少依赖包或者找不到一些东西，安装指定包或者做相应软链接即可！注意事项：yum安装比...
configure: error: Popt libraries is required
wdt3385的专栏
03-08 1270
编译安装keepalived时报错configure: error: Popt libraries is required 安装下popt-devel就可以了。 #yum install popt-devel 转自http://bbs.51osos.com/thread-7072-1-1.html
linux7安装PostGIS
sqlora的专栏
08-02 1966
1.安装PostGIS 环境变量参考：cat /etc/profile PATH=$PATH:/opt/pgsql/bin export PROTOBUF_HOME=/usr/local/protobuf-3.10.1 export PATH=$GCC_HOME/bin:$PROTOBUF_HOME/bin:$PATH export PROTOBUF_HOME=/usr/local/protobuf-3.10.1 export PROTOBUFC_HOME=/usr/local/protobuf
PostgreSQL安装时,出现 configure: error: library 'ssl' is required for OpenSSL
liguangxianbin的博客
03-20 3879
首先,在configure时,出现configure: error: library 'ssl' is required for OpenSSL.(ssl 库被openssl需要)而网上太多的是./configure: error: SSL modules require the OpenSSL library.(SSL需要openssl) ,与此error相反.  这个错误centos :yum...
postgres源码编译以及遇到的问题解决
T153511的博客
10-08 638
/configure --prefix=目录 CFLAGS=“-O0 -g” --enable-tap-tests --enable-cassert --with-libxml --enable-debug。到刚才配置的 目录下 找到/bin/
configure: error: python is unusable or does not exit
03-10
好的，我现在需要解决用户遇到的“configure: error: python is unusable or does not exist”这个错误。首先，我得弄清楚这个错误通常是在什么情况下出现的。根据经验，这通常发生在使用configure脚本配置软件项目...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值