默认设置adb打开

最新推荐文章于 2024-08-10 03:59:08 发布

fuyinghaha

最新推荐文章于 2024-08-10 03:59:08 发布

阅读量1.9k

点赞数

本文链接：https://blog.csdn.net/fuyinghaha/article/details/79036393

版权

你的usb的pid是多少，在init.qcom.usb.rc对应的function后面加上,adb

查pid

fuying@zhy:~/8.0/8953_3010009$ lsusb
Bus 002 Device 030: ID 05c6:9091 Qualcomm, Inc.
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 24ae:1100
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
然后打开init.qcom.usb.rc　在functions后面加上adb

on property:sys.usb.config=diag,serial_smd,rmnet_qti_bam,adb && property:sys.usb.configfs=0
    write /sys/class/android_usb/android0/enable 0
    write /sys/class/android_usb/android0/iSerial ${ro.serialno}
    write /sys/class/android_usb/android0/idVendor 05C6
    write /sys/class/android_usb/android0/idProduct 9091
    write /sys/class/android_usb/android0/f_diag/clients diag
    write /sys/class/android_usb/android0/f_serial/transports smd
    write /sys/class/android_usb/android0/f_rmnet/transports qti,bam
    write /sys/class/android_usb/android0/functions diag,serial,rmnet,adb
    write /sys/class/android_usb/android0/enable 1
    start adbd
    setprop sys.usb.state ${sys.usb.config}