--struts2中文件上传的二个限制,一个是struts.multipart.maxSize,如果不设置,struts2 的核心包下的default.properties文件里有默认的大小设置struts.multipart.maxSize=2097152,即2M. 这是struts2文件上传的第一道关.
第二道关是inteceptor中的maximumSize. 当真实的文件大小能通过第一道关时.针对不同的action中配置的inteceptor,maximumSize才能发挥相应的拦截作用.
比如struts.multipart.maxSize=50M. actionA中inteceptorA的maximumSize=30M. actionB中inteceptorB的maximumSize=10M.
struts.multipart.maxSize=50M对于inteceptorA,B都会起到第一关的作用.而inteceptorA和inteceptorB可以在通过第一关之后,根据自己的业务定制各自针对拦截器起作用的maximumSize
如果真实的文件>50M. 抛出会抛出the request was rejected because its size (XXXX) exceeds the configured maximum (XXXX)异常，他是不能被国际化的，因为这个信息是commons-fileupload组件抛出的,是不支持国际化这信息.
struts2.2 org.apache.commons.fileupload.FileUploadBase.java中
/** * Creates a new instance. * @param ctx The request context. * @throws FileUploadException An error occurred while * parsing the request. * @throws IOException An I/O error occurred. */ FileItemIteratorImpl(RequestContext ctx) throws FileUploadException, IOException { if (ctx == null ) { throw new NullPointerException( " ctx parameter " ); } String contentType = ctx.getContentType(); if (( null == contentType) || ( ! contentType.toLowerCase().startsWith(MULTIPART))) { throw new InvalidContentTypeException( " the request doesn't contain a " + MULTIPART_FORM_DATA + " or " + MULTIPART_MIXED + " stream, content type header is " + contentType); } InputStream input = ctx.getInputStream(); if (sizeMax >= 0 ) { int requestSize = ctx.getContentLength(); if (requestSize == - 1 ) { input = new LimitedInputStream(input, sizeMax) { protected void raiseError( long pSizeMax, long pCount) throws IOException { FileUploadException ex = new SizeLimitExceededException( " the request was rejected because " + " its size ( " + pCount + " ) exceeds the configured maximum " + " ( " + pSizeMax + " ) " , pCount, pSizeMax); throw new FileUploadIOException(ex); } }; } else { // /问题就在这里 if (sizeMax >= 0 && requestSize > sizeMax) { throw new SizeLimitExceededException( " the request was rejected because its size ( " + requestSize + " ) exceeds the configured maximum ( " + sizeMax + " ) " , requestSize, sizeMax); } } } String charEncoding = headerEncoding; if (charEncoding == null ) { charEncoding = ctx.getCharacterEncoding(); } boundary = getBoundary(contentType); if (boundary == null ) { throw new FileUploadException( " the request was rejected because " + " no multipart boundary was found " ); } notifier = new MultipartStream.ProgressNotifier(listener, ctx.getContentLength()); multi = new MultipartStream(input, boundary, notifier); multi.setHeaderEncoding(charEncoding); skipPreamble = true ; findNextItem();
如果InteceptorA上传的是40M的真实文件.那么此时拦截器InteceptorA会访问国际化信息:struts.messages.error.file.too.larges对应的值.
当且仅当上传文件<=30M的时候,InteceptorA才会成功上传.
下面是解决struts.multipart.maxSize提示信息不友好的问题.
当超过50M时.commons-fileupload抛出运行时异常,struts2会把这个异常看到是action级别的异常.所以会将异常信息
the request was rejected because its size (XXXX) exceeds the configured maximum (XXXX)写到actionError里面.我们需要做的就是在action里覆盖addActionError方法
@Override public void addActionError(String anErrorMessage) { //改从国际化里取值 if (anErrorMessage .startsWith( " the request was rejected because its size " )) { super .addActionError(getText( " struts.multipart.maxSize.limit " )); } else { super .addActionError(anErrorMessage); } }
相应的配置文件
struts.multipart.maxSize.limit=系统上传的文件最大为50M
struts.messages.error.file.too.larges=新广告批量上传的文件最大为5M
struts.messages.error.content.type.not.allowed=上传的文件格式目前仅支持xls格式
struts.messages.error.uploading=上传文件失败
struts.messages.invalid.token=您已经提交了表单，请不要重复提交。
fileupload.filenums.exceed=已经有超过5个文件在运行,请稍候再试
filedownload.rows.exceed=由于您选择的广告组内广告数量太多，请分组下载
accountNotExist=客户不存在
invalidTask=无效的任务
注意,由于inteceptor中途返回,原来页面上输入的其他文本内容也都不见了，也就是说params注入失败。
这个是没办法的，因为这个异常是在文件上传之前捕获的，文件未上传，同时params也为注入，所以这时最好重定向到一个jsp文件，提示上传失败，然后重写填写相应信息。
解决办法:最好跳到一个专门显示错误的页.而不要返回操作页.
-------------------------------------------------------------------------------------------
注意,拦截器所谓的同名配置覆盖,是重复执行的,比如defaultStack中是包含fileUpload,token的. 如果将<interceptor-ref name="defaultStack" />放到显示定义的拦截器之后,会覆盖显示定义的拦截器.
下面是正确的拦截器顺序:
< action name ="BatchMIADOperation!*" method ="{1}" class ="com.*****.***.action.multiidea.batchad.BatchMIADOperationAction" > < interceptor-ref name ="defaultStack" /> < interceptor-ref name ="fileUpload" > < param name ="maximumSize" > 5242880 </ param > <!-- <param name="allowedTypes"> application/vnd.ms-excel </param> --> </ interceptor-ref > < interceptor-ref name ="token" > < param name ="excludeMethods" > init,search,updateBatchCpcMatch,batchExportMIAD,downloadWhenError </ param > </ interceptor-ref > < result name ="input" > /WEB-INF/jsp/multiidea/batchad/BatchMIAD.jsp </ result > < result name ="success" > /WEB-INF/jsp/multiidea/batchad/BatchMIAD.jsp </ result > < result name ="invalid.token" > /WEB-INF/jsp/multiidea/batchad/BatchMIAD.jsp </ result > </ action >
76
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
