使用tayga测试无状态nat64功能

使用tayga测试nat64功能：
tayga程序安装在/usr/local/sbin/tayga目录下
配置文件在/usr/local/etc/tayga.conf下
建立db目录mkdir -p /var/db/tayga，这个目录存储map关系

tayga.conf配置文件：
tun-device nat64
ipv4-addr 192.168.255.1
prefix 2001:db8:1:ffff::/96     # replace with a prefix from
                                # your site's address range
dynamic-pool 192.168.255.0/24

执行：tayga --mktun建立TUN网络接口
nat64接口地址和路由配置：
ip link set nat64 up
ip addr add 2001:db8:1::1 dev nat64  # replace with your router's address
ip addr add 192.168.0.1 dev nat64    # replace with your router's address
ip route add 2001:db8:1:ffff::/96 dev nat64  # from tayga.conf
ip route add 192.168.255.0/24 dev nat64      # from tayga.conf

启动tayga程序：tayga

配置snat: iptables -t nat -A POSTROUTING -s 192.168.255.0/24  -j SNAT --to-source 10.2.21.13

/etc/sysctl.conf文件中配置IPv4和IPv6转发功能