华为交换机端口配置流量统计

SW流统（示例：源19.168.1.253，目的10.1.2.252）

# 配置ACL规则。

[HUAWEI] acl number 3001

[HUAWEI-acl-adv-3001] rule 5 permit icmp source 19.168.1.253 0 destination 10.1.2.252 0

[HUAWEI-acl-adv-3001] rule 10 permit icmp source 10.1.2.252 0 destination 19.168.1.253 0

[HUAWEI-acl-adv-3001] quit

# 配置流分类。

[HUAWEI] traffic classifier test

[HUAWEI-classifier-test] if-match acl 3001

[HUAWEI-classifier-test] quit

# 配置流行为。

[HUAWEI] traffic behavior test

[HUAWEI-behavior-test] statistic enable

[HUAWEI-behavior-test] quit

# 配置流策略。

[HUAWEI] traffic policy test

[HUAWEI-trafficpolicy-test] classifier test behavior test

[HUAWEI-trafficpolicy-test] quit

应用流策略。

[HUAWEI] interface gigabitethernet0/0/6   //数据通过的物理接口

[HUAWEI-GigabitEthernet0/0/6] traffic-policy test inbound

[HUAWEI-GigabitEthernet0/0/6] quit

[HUAWEI] interface gigabitethernet0/0/6

[HUAWEI-GigabitEthernet0/0/6] traffic-policy test outbound

配置完成后，ping测试 

如果需要重新进行流量统计，可执行下面命令清除原有流量统计信息。

reset traffic-policy statistics interface interface-type interface-number

查看对应入方向的流量统计：

display traffic policy statistics interface GigabitEthernet 0/0/6 inbound verbose rule-base

查看对应出方向的流量统计：

display traffic policy statistics interface GigabitEthernet 0/0/6 outbound verbose rule-base