主要使用GDIPlus中提供的抗锯齿的方法,主要有Delphi和C++下的应用代码。采用的GDI+为1.0。在D2007中初次使用GDI+时,会提示DirectDraw文件中PDirectDrawSurface的一些错误,修改方法为将:
修改为:
Delphi GDI+抗锯齿方法的使用:
SetSmoothingMode方法可使用参数如下: SmoothingModeInvalid SmoothingModeDefault SmoothingModeHighSpeed SmoothingModeHighQuality SmoothingModeNone SmoothingModeAntiAlias
参数说明如下:
SmoothingModeInvalid =-1;{指定一个无效模式}
SmoothingModeDefault =0; {指定不消除锯齿}
SmoothingModeHighSpeed =1; {指定高速度、低质量呈现}
SmoothingModeHighQuality=2; {指定高质量、低速度呈现}
SmoothingModeNone =3; {指定不消除锯齿}
SmoothingModeAntiAlias =4; {指定消除锯齿的呈现}
更多内容见万一的博客:
http://www.pujipc.com/html/biancheng/Delphi/20090205/11493.html
C++中的使用方法如下: