RocketMQ源码 — 三、 Producer消息发送过程

Producer

消息发送

producer start

producer启动过程如下图

public void start(final boolean startFactory) throws MQClientException {
    switch (this.serviceState) {
        case CREATE_JUST:
            this.serviceState = ServiceState.START_FAILED;

            // check  GroupName
            this.checkConfig();
            // 改变ClientConfig.instanceName为pid
            if (!this.defaultMQProducer.getProducerGroup().equals(MixAll.CLIENT_INNER_PRODUCER_GROUP)) {
                this.defaultMQProducer.changeInstanceNameToPID();
            }

            // 初始化mQClientFactory为MQClientInstance，并将该实例加入factoryTable
            this.mQClientFactory = MQClientManager.getInstance().getAndCreateMQClientInstance(this.defaultMQProducer, rpcHook);

            // 将producer注册到MQClientInstance.producerTbale
            boolean registerOK = mQClientFactory.registerProducer(this.defaultMQProducer.getProducerGroup(), this);
            if (!registerOK) {
                this.serviceState = ServiceState.CREATE_JUST;
                throw new MQClientException("The producer group[" + this.defaultMQProducer.getProducerGroup()
                        + "] has been created before, specify another name please." + FAQUrl.suggestTodo(FAQUrl.GROUP_NAME_DUPLICATE_URL),
                        null);
            }

            // 保存topic对应的routeInfo
            this.topicPublishInfoTable.put(this.defaultMQProducer.getCreateTopicKey(), new TopicPublishInfo());

            if (startFactory) {
                // 启动MQClientInstance
                mQClientFactory.start();
            }

            log.info("the producer [{}] start OK. sendMessageWithVIPChannel={}", this.defaultMQProducer.getProducerGroup(),
                    this.defaultMQProducer.isSendMessageWithVIPChannel());
            this.serviceState = ServiceState.RUNNING;
            break;
        case RUNNING:
        case START_FAILED:
        case SHUTDOWN_ALREADY:
            throw new MQClientException("The producer service state not OK, maybe started once, "//
                    + this.serviceState//
                    + FAQUrl.suggestTodo(FAQUrl.CLIENT_SERVICE_NOT_OK),
                    null);
        default:
            break;
    }

    // 启动的时候向所有的broker发送heartbeat
    this.mQClientFactory.sendHeartbeatToAllBrokerWithLock();
}

消息发送流程

消息发送过程：先由producer封装通过netty发送到broker，然后由broker进行保存，过程如下

============================= producer发送消息 =============================
主要逻辑在DefaultMQProducerImpl.sendDefaultImpl

1. 获取topicRouteInfo
   DefaultMQProducerImpl.tryToFindTopicPublishInfo
   ->
   MQClientInstance.updateTopicRouteInfoFromNameServer

private final ConcurrentHashMap<String/* group */, MQProducerInner> producerTable：放置所有的producer
updateTopicRouteInfoFromNameServer
- 获取topicRouteInfo
- 然后遍历producerTable，更新所有producer的topicRouteInfo
- 遍历consumerTable，更新所有的consumer的topicSubscribeInfo
- 加入topicRouteTable

->
MQClientAPIImpl.getTopicRouteInfoFromNameServer
通过netty向nameServer发出请求，请求topicRouteInfo

1. 选取一个messageQueue
   从messageQueueList取一个MessageQueue
2. netty发送消息
   DefaultMQProducer.sendKernelImpl，

============================= broker接收消息 ===&#