创建组接口
nmcli con add con-name team0 ifname team0 type team config '{"runner":{"name":"activebackup"}}'
nmcli connection show
配置组接口地址
nmcli connection modify team0 ivp4.address "186.168.100.88/24 186.168.100.1"
nmcli connection modify team0 ipv4.method manual
添加端口
nmcli connection add con-name team0-p1 ifname enp0s3 type team-slave master team0 --enp0s3及enp0s8为网卡名称
nmcli connection add con-name team0-p2 ifname enp0s8 type team-slave master team0
验证
teamdctl team0 state
[root@test ~]# teamdctl team0 state
setup:
runner: activebackup
ports:
enp0s3
link watches:
link summary: up
instance[link_watch_0]:
name: ethtool
link: up
enp0s8
link watches:
link summary: up
instance[link_watch_0]:
name: ethtool
link: up
runner:
active port: enp0s8
RHEL7配置双网卡冗余
最新推荐文章于 2023-02-20 10:46:04 发布