IPMI 协议 2.0 中文版本

IPMI 协议 2.0 中文版本

【下载地址】IPMI协议2.0中文版本 本仓库提供了一个名为“IPMI 协议 2.0 中文版本”的资源文件下载。该文件是专门为BMC(Baseboard Management Controller)工程师设计的,旨在帮助他们更好地理解和应用IPMI(Intelligent Platform Management Interface)协议的2.0版本 【下载地址】IPMI协议2.0中文版本 项目地址: https://gitcode.com/Open-source-documentation-tutorial/d5010

资源描述

本仓库提供了一个名为“IPMI 协议 2.0 中文版本”的资源文件下载。该文件是专门为BMC(Baseboard Management Controller)工程师设计的,旨在帮助他们更好地理解和应用IPMI(Intelligent Platform Management Interface)协议的2.0版本。

适用人群

  • BMC工程师
  • 对IPMI协议感兴趣的技术人员
  • 需要了解IPMI 2.0版本的中文资料的开发者

文件内容

该资源文件包含了IPMI协议2.0版本的中文翻译和详细解释,涵盖了协议的基本概念、命令集、数据格式以及实际应用中的注意事项。无论你是初学者还是有经验的专业人士,这份文件都能为你提供有价值的参考。

如何使用

  1. 点击仓库中的下载链接,获取资源文件。
  2. 使用你喜欢的文本编辑器或PDF阅读器打开文件。
  3. 根据你的需求,查阅相关章节,深入了解IPMI 2.0协议的细节。

贡献与反馈

如果你在使用过程中发现任何问题或有改进建议,欢迎通过仓库的Issue功能提出。我们非常乐意听取你的意见,并不断完善这份资源文件。

版权声明

本资源文件仅供学习和研究使用,未经授权不得用于商业用途。请尊重原作者的版权,遵守相关法律法规。


希望这份资源文件能够帮助你在BMC开发和维护工作中取得更好的成果!

【下载地址】IPMI协议2.0中文版本 本仓库提供了一个名为“IPMI 协议 2.0 中文版本”的资源文件下载。该文件是专门为BMC(Baseboard Management Controller)工程师设计的,旨在帮助他们更好地理解和应用IPMI(Intelligent Platform Management Interface)协议的2.0版本 【下载地址】IPMI协议2.0中文版本 项目地址: https://gitcode.com/Open-source-documentation-tutorial/d5010

### 回答1: 在 TURBO C 2.0 中,您可以使用 biosdisk() 函数来格式化软盘。 下面是一段代码示例: ``` #include <stdio.h> #include <dos.h> int main() { // 定义扇区的大小 unsigned int sector_size[3] = {512, 512, 1024}; // 定义填充字节 unsigned char fill_char[3] = {0xF6, 0xF6, 0x48}; // 格式化磁道 700 的前三个扇区 for (int i = 0; i < 3; i++) { int result = biosdisk(2, 0, 70, 0, i + 1, 1, sector_size[i], fill_char[i]); if (result != 0) { printf("格式化扇区 %d 失败,返回码: %d\n", i + 1, result); } } return 0; } ``` 请注意,在使用 biosdisk() 函数之前,需要包含 dos.h 头文件。 希望这能帮到您! ### 回答2: 使用TURBO C 2.0语言,可以通过以下代码格式化软盘的70磁道0面,并分别格式化3个扇区,大小分别为512字节、512字节和1024字节。其中,前两个扇区使用F6填充,第三个扇区使用48填充。 ```c #include<stdlib.h> #include<stdio.h> #include<dos.h> void formatFloppyDisk(){ union REGS regs; regs.h.ah = 0x0;// To format a floppy disk, we set AH=0 regs.h.dl = 0;// Drive number (0=A, 1=B, etc.) regs.x.cx = 0;// Track number to format regs.h.dh = 0;// Head number regs.h.al = 0;// Sector size (0=default, 1=512 bytes, 2=1024 bytes, 3=2048 bytes etc.) int FILL_BYTE = 0;// The byte value to fill the sectors with during formatting int NUM_SECTORS = 3;// Number of sectors to format // To format 70th track 0th head regs.x.ax = 0x1301; // 0x13 = Reset disk system, 01H = Reset only specified drive int86(0x13, &regs, &regs); // BIOS interrupt to reset disk system for (int i=0; i<NUM_SECTORS; i++){ regs.x.ax = 0x3101; // 0x31 = Write Format, 01H = Format only current track regs.x.bx = 0x0001; // 0x00 = Drive A:, 01H = Head 1, 0 = Generate ID Field depending on the disk in the drive 1 = Keep the ID Field all zeros regs.x.cx = 0x0170; // Track number=70(0-79 range) regs.h.dh = 0x00; // Head number=0 or 1 regs.h.al = 0x02; // Control byte=always zero regs.x.dx = i+1; // Sector number starting from 1 regs.x.si = 0x0000; // segment and offset of read/write buffer regs.x.di = 0x0000; // segment and offset of result if(i == 2){ FILL_BYTE = 0x48; // Fill the third sector with 48 regs.x.ax = 0x3102; // 0x31 = Write Format, 02H = Format sequential tracks immediately following the one being formatted }else{ FILL_BYTE = 0xF6; // Fill the first two sectors with F6 } regs.h.ah = FILL_BYTE; // Fill the sector with specified byte int86(0x13, &regs, &regs); // BIOS interrupt to format the specified sector } } int main(){ formatFloppyDisk(); return 0; } ``` 上述代码使用了INT 0x13,即BIOS中断服务例程,来执行软盘格式化操作。通过设置寄存器的不同参数,可以指定要格式化的磁道、面、扇区大小和填充字节。在这个例子中,我们格式化了软盘70磁道0面的3个扇区,前两个扇区使用F6填充,第三个扇区使用48填充。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

齐月丽

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值