xorg小结
8/22/2009 12:04:55 AM
在文件系统中找到这个文件:/etc/X11/xorg.conf ,然后在xorg.conf文件中找到如下区域:
......Section “Screen”
Identifier “Default Screen”
Monitor “Configured Monitor”
Device “Configured Video Device”
Defaultdepth 24
Option “AddARGBGLXVisuals” “True”
SubSection “Display”
Depth 24
Virtual 1024 768
.....
以上区域的内容视电脑而异,其实重点是用红色标识的Virtual 这个词后面的数字就是登录界面的分辨率,将其修改为正常或去掉就可以了(注意,不要超出使用的分辨率)
2.在Vmware下正常,正常模式下启动无法进入图形模式:
修改方法:
在root用户有下:
1.init 1
2.Xorg -configure
3.在主目录下应出现x.org.conf.new,用X -xf86config /root/xorg.conf.new
4.用Ctrl+Alt+Backspace可以退出X服务器,如果无法退出,可以直接使用init 1
5.将xorg.conf.new拷贝到/etc/X11/xorg.conf
重新启动电脑即可。注意:用dpkg-reconfigure xserver-xorg方法无效
可以使用displayconfig-gtk,然后再设置显示器和屏幕显示即可。
以下是份网友的参考配置:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder57) Thu Jul 17 18:39:19 PDT 2008
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard" "CoreKeyboard"
InputDevice "Configured Mouse" "CorePointer"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
VendorName "Generic CRT Display"
ModelName "Monitor 1024x768"
HorizSync 31.5 - 61.0
VertRefresh 50.0 - 75.0
Gamma 1
ModeLine "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480@72" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480@75" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -hsync -vsync
ModeLine "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
VendorName "NVIDIA"
BoardName "NVIDIA GeForce 6 Series"
Screen 0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
SubSection "Display"
Virtual 1280 960
Depth 24
Modes "800x600@72" "800x600@75" "800x600@56" "800x600@60" "640x480@75" "832x624@75" "640x480@72" "1024x768@75" "640x480@60" "1024x768@70" "1024x768@60" "1280x960@60"
EndSubSection
EndSection
文章出处:http://www.diybl.com/course/6_system/linux/Linuxjs/200888/135140.html